Availability
Showing In Stock Items. Show All 65 Items.
EMAX vertical solo-mounted alternating silent expandable airlink systems meet high-demands with "whisper-quiet" performance. These systems are equipped with an advantageous alternating switch that will allow the units to alternate from one pump to another. The units will pump up to set pressure, then under the next start-up sequence the opposing pump will start, eliminating excessive running and allowing the pumps to cool under heavy loads. Plus, if one pump will not maintain set pressure and is not keeping up with demand, then both units will come on and run until the unit hits the pressure setting, after which it will go back into normal alternating mode. EMAX alternating silent air compressors have many features that make them easy to use, from automatic tank drains to belt tensioners. With EMAX's patented Whisper100 silent air onboard, these low-profile systems add four levels of air filtration along with making the compressor quiet, lowering the decibels by more than 35 percent. Key features: * Alternating switch that will allow the units to alternate from one pump to another * Two low-rpm solid cast iron patented pressure lubricated pumps * Two industrial grade 1750 rpm TEFC motors * Two magnetic starters with relay switch * Two ASME certified vertical tanks * Whisper100 Silent Air system * Re-usable oil filter * Oil pressure gauge
Not Yet Reviewed
$11,340.94
—
$11,446.94
BendPak MDS-6LPF mid-rise open-center flush-mount lifts are designed for full-service shops and quick-lube centers. They will collapse perfectly parallel with your flooring for those full-service bays. Additional facts and specs: * 6,000 lb. lifting capacity * Four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 lb. capacity * Push-button safety lock release system * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas * Comes standard with four durable cushioned-rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to operate at a different working heights to increase productivity
Not Yet Reviewed
$7,695.00
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$5,296.82
—
$7,204.82
BendPak HD-9 standard width car lifts are ideal for vehicle storage in residential garages or commercial buildings. They can also double as great service lifts for smaller shops that do a lot of business. The BendPak HD-9 car lifts are about the size of a typical parking space and will truly maximize your valuable floor area. Additional features include the following: * 9,000 lbs. maximum lifting capacity * Freestanding design * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push button pneumatic safety release * Independent backup slack cable safety latches
( 5 )
$6,095.00
OTC 55-ton heavy-duty shop presses feature side-to-side positioning of ram to allow full capacity pressing along entire bolster length without buckling or bending. Presses include a single-acting ram with 13 in. stroke, electric/hydraulic pump, gauge, 3/8 in. I.D. x 8 ft. hose, and pump mounting bracket.
Not Yet Reviewed
$10,749.99
BendPak HD-9ST narrow width car lifts are rugged, space-saver solutions with a 9,000 lb. lifting capacity. They are great for the DIY projects and daily shop work at small businesses. These BendPak lifts are designed for shops or garages where space is a premium. Trust in BendPak for all of your lifting needs. Additional features include the following: * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push button pneumatic safety release * Independent backup slack cable safety latches * Removable approach ramps for additional drive under clearance * Longer approach ramps for additional drive under clearance
( 7 )
$5,995.00
Shorter, wider, taller--BendPak HD-7W car lifts provide extra for your smaller space! These shorter, extra-wide, extra-tall 4-post lifts offer the ultimate in compact convenience with BendPak lifting power. The lifts feature a heavy-duty, high-quality design with large base plates for a good foundation, stainless steel lifting cables for maximum lifting strength, and hydraulic power systems for the utmost dependability. HD lifts are finished with a durable powdercoated finish to withstand the harshest environmental or chemical conditions. Maximize your floor space by moving up with BendPak HD-7W car lifts. Other BendPak HD-7W car lift features include: * 7,000 lb. maximum lifting capacity * Wide drive-through with tall lifting height and short runways * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Ramps have nonskid surfaces * Push-button pneumatic safety release
Not Yet Reviewed
$6,695.00
OTC 100-ton capacity heavy-duty shop presses are designed for a wide range of industrial and automotive applications, primarily for pressing, bending, and straightening metal components. Their high capacity allows them to handle large and heavy parts found in truck, construction, and agricultural equipment. OTC Tools offers these 100-ton heavy-duty shop presses in several versions, each model type listed below states specific features (per model). Please specify which OTC 100-ton heavy-duty shop press model you're interested in purchasing when placing order. Specific features of 100-ton heavy-duty shop presses (per model): * OTC No. 1857 model: includes single-acting ram with 10 in. stroke, hydraulic hand pump, gauge, hose and pump mounting bracket * OTC No. 1858 model: has all the same great features as their No. 1857 model, except has double-acting ram with 13 in. stroke, 3-phase, 220 V, 3,450 rpm electric/hydraulic pump and two hoses * OTC No. 1858-1P model: same as OTC Tools No. 1858 model, except it has a 2-stage, 1-phase hydraulic pump Featured highlights (per model): * 100-ton capacity allows handing large and heavy components * Designed for durability and to withstand full capacity loads * Wide openings between uprights allow for easy positioning of parts for pressing, bending and straightening metal components * Ram head glides smoothly on rollers for easy horizontal adjustments * Rugged press frame will withstand a full capacity load with the ram head in any position across the upper bolster * High capacity and adjustable bolster allows for a variety of maintenance and repair tasks in various industries * Depending on model selected, some feature a remote pump for easier operation and better visibility during pressing operation
( 2 )
$15,146.99
—
$25,009.99
The space saving design of the 9,000 lb. capacity BendPak HD-9XW is ideal for vehicle storage in residential garages or commercial buildings. It also happens to make a great service lift for smaller shops who still want to do a big business. These lifts are about the size of a typical parking space, helping to maximize floor space. The BendPak HD-9XW is great for storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. You can finally make use of that wasted vertical space above your car. Additional features include the following: * 9,000 lbs. maximum lifting capacity * Freestanding design * Runways accommodate narrow and standard vehicles * Electric / hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Removable approach ramps for additional drive-under clearance
( 14 )
$6,495.00
BendPak HD-14TL tall car lifts are designed to give you the versatility of a heavy-duty lift with an extra foot of clearance. Able to support 14,000 lbs. and provide 82 in. of rise, they double as high-clearance parking solutions when your car collection needs to double up in the garage. With automatic safety locks and a secondary lock system, these BendPak HD-14TL lifts are secure hydraulic lift or storage options for your vehicle. Features include: * Long-style approach ramps for low ground clearance vehicles * Runways include rail-kit for optional accessories * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Pneumatic push-button safety release * Heavy-duty 1/2 in. aircraft cable * Safety locks enclosed in columns minimize pinch points * Hardened-steel sheaves with self-lubricating bearings * Multi-position safety locks in each column * Customizable power unit location * Approach ramps incorporate built-in rear-wheel chocks * Independent backup slack-cable safety latches * Runways feature non-skid surface
Not Yet Reviewed
$8,062.99
With shorter length and extra height, the BendPak HD-7P short runway extra-tall car lifts are the ultimate in compact convenience when you want the lifting power of a lift in a tight space. They are the perfect service lift for shops with limited floor space or a home carport. The HD-7Ps require no special foundation or complicated installation and are about the size of a typical parking space. Additional features include the following: * 7,000 lbs. maximum lifting capacity * High lift with short runways * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * High-speed lifting * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Ramps feature non-skid surface * Push-button pneumatic safety release
( 1 )
$6,595.00
Lincoln Electric Precision TIG 275 welders feature patented Micro-Start II Technology and Lincoln Electric's AC Auto Balance on-board, which deliver unrivaled starting and welding at low amperages and improved AC aluminum welding performance. New features, simple controls, innovative accessory storage, and attractive and consistent welds--they all add up. Whatever the TIG welding application--fabrication, aerospace, production, motorsports, or vocational education--choose the Precision TIG® 275 welders for outstanding features and precise arc performance. Their redesigned controls are simple and well-spaced for effortless setting changes, and their hidden menu button features up to 7 programmable parameters without cluttering the control panel (requires optional Advanced Process Panel, sold separately). The Auto Balance has been readjusted to have more penetration and improved bead appearance. Additional features include: * 115 V auxiliary power receptacles for powering an optional water cooler or power tools * Built-in storage compartment for torch consumables * Water-cooled torch connections with no adapters required--side mounted, out of the way, and well protected * Neat/organized cable management with integrated torch holster * Selectable welding modes such as high frequency, scratch start, and Touch Start TIG * Higher duty cycles--275A at 40 percent duty cycle * Widest welding range in its class, 2-340 amps for both AC and DC * Excellent stick welder--even with Fleetweld 5P with Automatic Hot Start and Auto Adaptive Arc Force controls (requires optional Advanced Process Panel, sold separately) * Fan-As-Needed (FAN) prevents overheating. FAN reduces power consumption, noise, motor wear, and dust in the machine * CSA C/US-certified
Not Yet Reviewed
$7,569.99
These industrial strength BendPak HD-9SWX 9,000 lb.-capacity lifts work equally well in the service shop or at your home. Their super-wide construction allows these lifts to raise and store two vehicles simultaneously on four runways, while their high-rise design ensures that you'll rarely find a vehicle that won't fit underneath. Additional features include the following: * Double-wide configuration for quad-vehicle storage * Four runways * Super-tall rise * Extra-long ramps * Runways accommodate wide or narrow vehicles * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Oversized sheave diameter reduces cable fatigue * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Inside runways adjust for different tread widths * Customizable power unit location * Removable approach ramps for additional drive-under clearance
Not Yet Reviewed
$12,595.00
iDEAL Equipment 4-post service lifts are high-performance closed front, cable pull vehicle lifts designed for cars, SUVs, vans, and trucks. These lifts include the latest in design and safety features including, narrow and wide runway mount positions, extended rise height for greater undercarriage vehicle access, concealed hydraulic and mechanical cable lift system with slack cable safety devices. Additional features are a durable pulley and shaft design incorporating convenient grease fittings to extended life of the lift, self- chocking ramps, wheel stops, single point pneumatic lock release, and high-quality power unit. iDEAL Equipment 4-post service lifts modular design provides flexibility to extend the runways for servicing longer vehicles, while also providing the ability to convert into a high-quality alignment lift quickly and easily. With 20 in. wide runways, adjustable lock stops for easy runway leveling, optional power unit mount positions, and a durable powdercoat finish complete the package for a premium, high quality service lift for an unmatched value! Features and benefits: * Lift capacity 14,000 lbs. * Durable, high-quality cable lift system * 182.5 in. maximum wheelbase * 18 locking height positions * Fully adjustable lock stops for easy leveling * Wheel chocks, 1-pair
Not Yet Reviewed
$9,010.00
Baileigh Industrial heavy-duty BB-9612 box and pan brakes will bend a 4 ft. x 8 ft. sheet of 12-gauge mild steel the long way! Their steel framework ensures decades of crisp bends and reliable production, and the hardened fingers and bending rail will produce incredibly straight, tight corners, even when working with stainless steel. Baileigh heavy-duty BB-9612 box and pan brakes include a 22-finger assortment of varying sizes and two massive bending apron counterweights that help keep your fatigue low, even when working at full capacity. Other product features include: * 8 ft. (96 in.) bending width * Maximum capacity of 12-gauge mild steel and 16-gauge stainless steel * Bend angle of up to 135-degrees * (6) 3 in. fingers; (4) 4 in. fingers; (10) 5 in. fingers; (2) 6 in. fingers * Maximum box depth of 6 in. * Apron side shafts ride in bearings that can be oiled to improve tolerance and make the apron last longer * Heavy truss rods reinforce the rigidly-built apron and help it withstand deflection * Mounted on a stable floor stand and raised to the ideal height, it improves efficiency and reduces operator fatigue * Electro-welded steel construction withstands bending at maximum capacity, day-in and day-out, for decades of quality bends * Heavy framework weighs an impressive 3,200 lbs. * Recommended for: bending mild steel, aluminum, and stainless steel
Not Yet Reviewed
$14,299.00
Baileigh Industrial R-H55 angle ring rollers offer rugged steel construction and high-quality components to ensure your investment will not buckle or loose accuracy when bending at full capacity. Baileigh programmable ring rollers can be operated in the vertical mode for smaller diameters and laid on their backs for horizontal bending when larger diameters are required. Features: * R-H55 rollers run on 220 V 3-phase power * Bend up to 4 in. round tubing with a .083 in. thick wall * Three rolls driven by 5 hp motor with direct-drive transmission * Industrial-grade hydraulic cylinder system lets you adjust the positioning of top forming roll with the programmable control station * Digital readout on top roll position makes each bend easily repeatable, key for those multiple-piece production runs * Built from heavy steel plate and mounted on a fully welded steel housing to sustain machine's strength
Not Yet Reviewed
$22,934.00
The design of BendPak HDSO-14AX alignment extended open-front lifts makes it easier to access the front turn plates and undercarriage. These vehicle lifts feature an alignment system that has front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle. The car lifts are available with optional drive-thru ramps, drip trays, and rolling jacks. Additional facts and specs: * 14,000 lb. lifting capacity * CE-approved and certified * Automatic leveling system * Multiple auto-leveling locking positions * Runways include rail kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal "Anti-Sway" UHMW slider blocks in each column * Features oversize sheaves and heavy-duty 1/2 in. aircraft cable * Rugged 1 3/8 in. roller axles and oversized self-lubricating cable sheaves * Runways adjust for different tread widths and feature non-skid surface
Not Yet Reviewed
$14,395.00
BendPak BB-2 Blue-Bullet pipe benders provide the ultimate tooling package and machine for your shop. They come standard with bending dies, back shoes, half shoes, three-quarter shoes, solid expander dies, pipe collars, end finishing tools, segment expanders, and accessories. These 5 hp Blue-Bullet benders use efficient Baldor motors, 4 gpm direct drive pumps with oversize 0.5 in. high-pressure hoses, and high-capacity fluid reservoirs to keep efficiency high and temperatures lower. Commercial-grade hydraulic cylinders with chromoly shafts, heat-treated tooling, and quick-change bending dies are designed to keep these machines on the cutting edge for years to come. When it comes to bending, flaring, and expanding exhaust tubing, always be prepared for the job with BendPak BB-2 Blue-Bullet pipe benders. Additional features: * Two separate end-finishing units at rear * One-piece barrel to keep gates aligned with ram * Front mounted adjustable pressure valve * NEMA rated on/off switch box with overload relays * Bending dies in 1.5, 1.75, 1.875, 2, 2.25, and 2.5 in. sizes * Can bend up to 3 in. by 0.095 in. wall tubing with appropriate dies (not included) * Single handle or knee controls * BendPak's 10-step powdercoating ensures thorough coverage and an extremely durable finish
Not Yet Reviewed
$11,995.00
If you're looking for a little more lift and a lot less column interference, then BendPak's HD-9SW 9,000 lb. lifts are the answer. These super-wide 4-post lifts are designed to transform your garage into a state-of-the-art parking facility--turning that 2-car space into a 4-car trophy stand. The HD-9SWs are standard rise units with standard length runways. You can always count on BendPak lifts for increased durability, safety, and productivity. Spend less time worrying about what you're working under and more time doing with you love. Additional features include the following: * Standard rise * Shorter runway for smaller spaces * Runways accommodate wide or narrow vehicles * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Oversized sheave diameter reduces cable fatigue * High-speed lifting * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Inside runways adjust for different tread widths * Customizable power unit location * Removable approach ramps for additional drive-under clearance
Not Yet Reviewed
$11,495.00
BendPak HDS-14 standard length car lifts provide you with a generous 14,000 lb. lifting capacity that is sure to handle most jobs around the shop. Their extended runways will accommodate a wide variety of vehicle types. Trust in BendPak for all of you lifting needs. Additional features include the following: * 10 1/2 in. diameter cable sheaves within the runway * 2 1/4 in. diameter sheave axles, improves cable wear and critical component life span * Four 1/2 in. diameter 6 x 25 stainless steel lifting cables * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Pneumatic push button safety release * Rugged 1 3/4 in. roller axles * Customizable power unit location * Approach ramps incorporate built-in rear-wheel chocks * Independent backup slack cable safety latches * Runways feature non-skid surface
( 1 )
$8,595.00
The BendPak HDS-14LSX alignment extended lifts are designed and engineered to meet the strenuous demands of even your toughest professional lifting jobs. They feature-aircraft quality stainless steel and aluminum pneumatic cylinders that release all four locks simultaneously with the simple push of a button. BendPak manufactures these lifts from high-quality materials resulting in years of trouble free performance. Trust in BendPak for all of your lifting needs. Additional features include the following: * 14,000 lb. capacity * Heavy-duty turn plates and integrated rear slip plates * Multi-position turn plate pockets * Automatic leveling system * Multiple auto-leveling locking positions * Runways include rail kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversize sheaves and heavy-duty 1/2 in. diameter aircraft cable * Rugged 1 3/8 in. roller axles and oversize self-lubricating cable sheaves * Runways adjust for different tread widths and feature non-skid surface
Not Yet Reviewed
$12,295.00
OTC 25-ton heavy-duty open throat shop presses enables ram to be positioned outside of press frame for fast axle bearing removal and installation, as well as other tasks. Two models are offered with either an air/hydraulic pump or two-stage hand pump. Features, benefits, and contents: * Press bed is raised or lowered with a hand crank * Spring-return hydraulic ram is laterally adjustable for off-center work at full capacity * Hydraulic ram with 14 in. stroke * Gauge, hose, and pump mounting bracket
Not Yet Reviewed
$8,522.99
Make the most of your Edward Ironworkers shop press by adding their versatile brake tooling. Mounted to a machined solid-steel base and pushblock, this robust tooling features heavy-duty return springs for smooth operation. Press brake tooling includes Edwards' rugged, machined punch and 4-way die. The brakes are available in lengths from 12 in. up to 40 in.—and each can bend 90 degree angles. Order the tooling best suited for your shop press model.
Not Yet Reviewed
$5,444.99
—
$6,692.99
Edwards Ironworkers offers 60-Ton Shop Presses with PLC (Programmable Logic Control) to enhance productivity. PLC improves press accuracy with precision pressure and increased efficiency with automatic returns, creating shorter cycle times—up to 50 percent time savings. Set your pressure with adjustable PSI. The magnetic base allows for easy mounting of the PLC anywhere on the machine. These machines are a perfect fit for shops that produce repeatable pieces that cannot justify a fully automatic press brake. Additional product details: * 1/2 in. and 3/4 in. heavy-duty steel construction * Easy-to-use foot pedal * Versatile rolling cylinder * Working area of 42 in. x 39 in. * Pressure gauge * Quick-disconnect hoses * Hydraulic-assist table height adjustment * 2 V-Blocks included With the Press Brake Tooling, your Shop Press easily becomes a brake. Check out Edwards' bump-die tooling, the 6-Piece Press Tooling Set, and the Press Brake Back Gauge. Edwards' 60-Ton Shop Press solves a variety of demands to improve user productivity. Smooth and precise, and both heavy-duty and versatile, the unique, open side design allows for material to pass through. Power it up with a factory installed PowerLink System or an Edwards Portable Power Unit.
Not Yet Reviewed
$19,110.99
—
$24,672.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
