Availability
Showing In Stock Items. Show All 41 Items.
BendPak P-9000LTF low-rise open-center pit-style lifts have a lot of lifting potential. With their optional arm extension kit, high-stance trucks and SUVs can be easily serviced. Shops run faster and earn more with one of these lifts at their disposal. A host of clever engineering devices and standard features ensure this car lift will last for many years of valuable service. Additional facts and specs: * 9,000 lb. lifting capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick set-up
Not Yet Reviewed
$7,295.00
BendPak MDS-6LP mid-rise open-center lifts are designed for home garages, full-service shops, and quick-lube centers. Basically anyone that works on cars! Additional facts and specs: * 6,000 lb. lifting capacity * Four solid steel-scissor frame support bars make this one of the strongest mid-rise lifts in its class * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 lb. capacity * Push-button safety lock release system * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas * Comes standard with four durable cushioned-rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to operate at a different working heights to increase productivity
Not Yet Reviewed
$7,995.00
BendPak MDS-6LPF mid-rise open-center flush-mount lifts are designed for full-service shops and quick-lube centers. They will collapse perfectly parallel with your flooring for those full-service bays. Additional facts and specs: * 6,000 lb. lifting capacity * Four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 lb. capacity * Push-button safety lock release system * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas * Comes standard with four durable cushioned-rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to operate at a different working heights to increase productivity
Not Yet Reviewed
$7,895.00
Using long-wheelbase vehicles as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lifts to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two extended mid-rise lift models maintain their open-center design, just like their standard length MDS-6LP and MDS-6LPF models. The MDS-6EXTF extended-length, flush-mount, mid-rise lifts provide quick-lube stations looking to install a car lift flush over work pits. If your shop wants to be ready for longer-wheelbase vehicles and minimize the lift's footprint, you can't do better than BendPak's MDS-6EXTF mid-rise open-center car lift. Key features: * 6,000-lb. lifting capacity * Open-center design/flush-mount * Adjustable arm assemblies * Solid-steel safety lock bars * Multiple lock positions * Hinge-point with Zerk grease fittings * Low-profile design * Rubber blocks included * Removable ramps
Not Yet Reviewed
$8,295.00
The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
Not Yet Reviewed
$8,395.00
Expand the limits of your creative possibility and take your passion to a whole new level with the Powermatic 4224B Lathe with Lamp Kit—the newest member of the industry-leading family of lathes. At over 900 lbs., the 4224B lathe is the biggest, heaviest, and most capable machine Powermatic has ever built. With newly designed, top of its class features, the 4224B Lathe pushes the limits of design, innovation, and durability. Highlights and features: * Motor Power (HP) 3 * Bed construction cast iron * Motor Phase 3 * Recommended circuit size (Amps.) 30 * 15-amp quad receptacle for easy reach of powered accessories * Variable frequency drive allows machine to run on single- or three-phase power * Air nozzle with quick-connect for clearing dust/chips * Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers * Includes two 100-watt task lamps to provide ideal lighting and safety guard * Magnetic-backed moveable control box for versatility and safety * Set of dead centers—which holds a spindle for visual comparison * Sliding headstock with electronic variable-speed * Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes and other equally spaced features * Vacuum system provides quick method of chucking bowl blanks
Not Yet Reviewed
$7,999.99
Baileigh Industrial CS-350M circular cold saws are among the best on the market for their price. They make pristine cuts and include features you won't find on competing saws, like a self-centering vise and coolant system. CS-350Ms will miter 45-degrees right and 90-degrees left, making them ideal for slotting applications. If you're working with marine rails, playground equipment, hand railings, various chassis applications, or other fabrication cutting jobs, it's hard to beat what Baileigh CS-350M circular cold saws offer! Other product features and specs include: * Accepts a 14 in. blade * (2) blade speeds: 26 and 52 rpm * Robust 4-hp motor runs on 220 V, 3-phase power * All-metal gears in the direct-drive head are ground and hardened for reliability * American-style vise keeps the material perfectly centered with the blade for clean, correct cuts * Backlash adjustment maintains tight tolerances and keeps "play" in the gearbox to a minimum * Rigid cast iron base keeps vibrations to a minimum so that the saw cuts accurately and reliably * Heavy, molded steel stand brings the saw up to a comfortable cutting height * Industrial-grade flood coolant system ensures a long lifespan of use for both blades and saw * Coolant system lubricates the blade, reducing strain on the operator * Capacities at 45-degrees: round solid (1.575 in.), square tube (2.953 x 2.953 in.), round tube (2.953 in.), rectangular tube (2.953 x 2.362 in.) * Capacities at 90-degrees: round solid (2.362 in.), square tube (4.250 x 4.250 in.), round tube (4.331 in.), rectangular tube (4.250 x 3.500 in.)
Not Yet Reviewed
$8,878.99
Within Baileigh Industrial's lineup of vertical band saws, the BSV-14VS-V2 metal cutting band saws can increase capacity and add a variable-speed pulley, which makes them a great choice for any shop that cuts a variety of materials, such as aluminum, plastic, mild steel, and chrome alloy. These Baileigh Industrial band saws include everything you need to cut out the center of the material—without having to fix a cut through it! Features of BSV-14VS-VS vertical band saws: * Thick steel plate framework minimizes vibrations to deliver accurate cuts and helps the machine last for many years * 1 hp motor runs on 120 V power * Cast iron table can pivot front to back and left to right * Includes a cast iron mitering system, rip fence, and protractor to make sure your cuts are straight and repeatable * Variable-speed from 110 to 1,200 fpm allows you to adjust the speed for cutting wood, metal, and even plastic * Change the speed with the hand wheel (just turn right for higher speed, left for lower) * Speed scale lets you see the estimated blade speed, so you can choose the right settings for your material and extend blade life * Manual shear lets you cut the blade, so you can run it through the workpiece, then weld it back together * Comes standard with a fully-integrated blade welder with a built-in grinder for finishing the weld joint—great for getting to the center of a cut or repairing blades * Air blowdown system cools the blade and keeps the saw clean from material chips and shavings * Halogen work light lets you see what you're cutting more clearly * Wide 14.17 in. throat depth * 7.08 in. maximum cutting thickness * Accepts standard 1/8 in. to 1/2 in. blades * Covered by a 1-year parts warranty by Baileigh Industrial * Includes lifetime technical support by phone so you can call their team of experienced reps whenever you need help with this metal-cutting band saw
Not Yet Reviewed
$5,978.99
Baileigh Industrial's TN-400 abrasive tube notcher uses a self-centering vise to guarantee the right belt positioning every time. This machine will help you perfectly cope thin wall tubing. Product details: * 3 hp motor runs on 220 V single-phase power * Ideal for coping the ends of .75 in. O.D. to 2 in. O.D. tubing or pipe * Notches at almost any angle up to 60 degrees * 79 in. x 4 in. belt spins at a speed of 5420 ft. per minute * V-block design of the vise jaws keeps the tube or pipe centered with the notching spindle and holds it securely * Vise carriage rides on a smooth Thompson shaft assembly during the notching cycle * Pivoted control lever presses the material press into the belt * Quick-change tooling system allows you to swap out the mandrel in seconds * Comes standard with 1.25 in. pipe mandrel * Carriage stop ensures repeatable notches every time
Not Yet Reviewed
$5,889.00
Ranger RL-8500XLT brake lathes feature an extended capacity spindle and can turn a drum that's up to 10 in. deep. The longer spindle and the relocated rear bushing provide the arbor with enough support to handle your heaviest drums, rotors, and flywheels. Durably crafted, RL-8500XLT brake lathes resurface brakes quicker and more precisely than any other lathing unit on the market today. They feature unlimited feed rate settings, allowing the user to modify resurfacing rates with an easy turn of the dial. Now you can decrease or amplify the cut duration for the perfect finish, whether you're rushing through the first rough cut or performing a single-pass micro-finish. Features include: * RL-8500XLT uses precision electric DC servo motors designed to meet the demanding requirements of industrial motion control * Quick-Change Adapter-Plus system with built-in springs eliminates the need for conventional bell clamps and cones * Works on all cars or trucks, both foreign and domestic, with hubless drums, rotors (center hole sized 2 5/32 in. to 4 in.) and composite rotors (center hole sized 4 in. to 6 1/4 in.) * Precision twin cutter tools and a quick drum-to-rotor changeover
Not Yet Reviewed
$12,795.00
If you're looking to save time, the Ranger R80EX tire machine is a must-have for busy shops. The R80EX tire changers feature a dual-assist, tilt-back tower design, so it's outfitted with the industry's best and most powerful tools. With this equipment, you get the classic rugged reliability Ranger is known for, plus dozens of standard features. A multi-profile traveling drop-center tool, top bead assist rollers, dual lower bead lifting discs and a nylon non-marring wheel restraint device are important tire shop tools designed to dramatically reduce effort, increase safety, and help minimize operator fatigue. If your shop life demands a tool that will generously handle round-the-clock use and abuse, the R80EX delivers! Key features and specifications: * Sealed electronic components for air-tight, dust-free, and contamination-proof protection of terminal leads * Updated electric motor features the best of proven technologies, including rugged copper rotor construction, high-quality bearings, thermal-cool epoxy insulation and durable rolled steel frames * Balanced flywheel helps machine run smoothly, reduces vibration, and helps minimize associated stress on other machinery components * Table clamping system * Dual pneumatic cylinders * Simple foot-pedal control—durable forged steel (instead of cast iron) and features multi-link rod connections for non-binding plunger movement and precise bilateral control * Adjustable RimGuard wheel clamps feature internal/external multi-teeth jaws * Variable clamp positioning makes wheel service simple, perfectly controlling the wheels when clamping them * Adjustable bead loosener system and pneumatic blade—bead loosener control single-lever control on shovel handle * Bi-lateral power-controlled bead loosener features single-lever control on the shovel handle—this ergonomic design eliminates traditional foot-pedal controls that often force technicians into unbalanced working stances when loosening beads * Dual left and right power assist towers * Tower design tilt-back—provides greater clearance and access for tire removal and inflation * Pneumatic-lock tool head stays positioned on the tower return for instant set up for like sets of tires and wheels * Upper bead assist roller * Standard/Dual power-drop * Traveling drop-center hold-down device * Wheel centering tool/Inflation restraint device * Turbo-Blast bead seating system * Tool tray/Bin storage * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Water filter/Oiler/Lubricator * Air regulator * Tire iron/Bead lever tool * Large soap/Lubricator bucket * Brush * Motorcycle turntable clamps (optional)
Not Yet Reviewed
$10,895.00
The BendPak PL-6000DC is an add-on shared column and platform two-post parking lift specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. They can be ganged together with shared columns allowing you to fit more units into a smaller space. The PL-6000DC dual-column parking lift can accommodate a wide array of vehicles including SUVs, sedans, and sports cars and offers the perfect combination for both long-term and short-term parking. Typically, long-term parking is the upper level and short-term parking below. They can be installed inside a typical 8-foot parking space to accommodate most cars and light trucks and operate in both indoor and outdoor locations. Product specs and advantages: * Low operating cost—platform driven by gravity when lowered, no electric motor consumption is required * Designed for installation on typical parking surfaces—detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work * Ganged column design allows multiple installations in minimum space * Commercial grade design and construction—add-on column for PL-6000DC lifts; lifting capacity: 6,000 lbs. (2,722 kg) * Galvanized and corrugated anti-slip platform * Freestanding design when ganged two or wide * Overhead power unit provides smooth quiet hydraulic operation * Platform can be stopped at different heights to fit various vehicles and ceiling heights * Full-width channel-locked center panels protect lower vehicle * Wide deck platform accommodates pickups, vans, and cars * Dual direct-drive hydraulic cylinders * Automatic safety lock combined with anti-fall device to hold platform securely * Virtually maintenance-free composite carriage bearings * Electric key switch for security and safety * Automatic shut-off when operator releases key switch * Manual lock release available in case electricity failure (optional) * Hydraulic overloading protection * Photocell sensor prohibits lift to be lowered if vehicle is parked below Safety features: * Mechanical safety locks are spaced every 4 inches * 24 V operator controls and lock release * Photocell sensor prohibits lift to be lowered if vehicle is parked below * Electric protection for power overload or improper voltage * Automatic locking system during power outage * Emergency stop button * Upper limit switch * Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting * Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups, and wear bands to virtually eliminate fluid bypass Important Note: BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). The buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Not Yet Reviewed
$8,595.00
The powerful BendPak RBK18000 rolling bridge jacks are made for use with your HD-35 4-post series lift. Sometimes a vehicle's center of gravity isn't in the exact middle of the vehicle. While the 18,000-lb. capacity RBJ18000 jack is capable of handling the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial drivers have significantly offset centers of gravity. Therefore, it's extremely important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of this RBJ18000 rolling bridge jack will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift Series. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you're raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat. Additional product features: * 18,000-lb. lifting capacity * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more, with three lock level positions on the jack, your ultimate working height is much more versatile * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,395.00
BendPak's RBJ25000 rolling bridge jacks offer 25,000 lbs. of muscle meant to service some of the biggest commercial fleets on earth. This jack can be used on your HDS40 four-post truck lift to perform wheel service on almost any heavy-duty vehicle on wheels. The RBJ25000 rolling bridge jacks are over-engineered to handle offset centers of gravity on extremely heavy vehicles. Who might need bridge jacks of this caliber? For one, heavy-duty trucks and buses tend to require a bridge jack rated for more than half of the overall vehicle weight. Generally speaking, if you can safely lift a vehicle with the HDS-40 four-post lift, you can safely perform wheel service with the RBJ-25000 rolling bridge jack. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axel and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. Additional product features: * 25,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Lift to three lock positions for your convenience—the higher the jack, the more undercarriage clearance you get on your HDS-40 four-post lift * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,595.00
BendPak P-900LT low-mid-rise lifts are heavy-duty. With increased lift capacity of 30 percent over past models, they maintain all the features you love—like the dual-approach design, open-center access, and a hands-free safety check. This is the industry's ultimate pit lift, perfect for quick-lube shops, full auto centers, and home garages. The P-900LT offers a minimal footprint and full access to the wheels and undercarriage. Ramps detach quickly to convert a flush-mount unit to a floor unit. Additional facts and specs: * 9,000 lb. capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick setup
Not Yet Reviewed
$7,395.00
BendPak LR-1000 low-rise lifts are your solution for quick maintenance and increased productivity when servicing today's passenger cars and light trucks. From tire and brake service … to vehicle detailing and body repair, these lifts will facilitate your work on a wide variety of vehicles. Additional facts and specs: * Low-profile height that accommodates most vehicles, including sports cars, race cars, and larger trucks and SUVs * Single-point safety release make this lift easy to operate and very safe to use * Dropped crossbar in the center provides added vehicle drive-over clearance. Suspension work, oil changes, wheel and brake service, and detailing are easier than ever * Industrial-grade hydraulic cylinder * Solid rubber lift blocks
Not Yet Reviewed
$5,595.00
BendPak HD-973P tri-level parking lifts are a cost-effective way to triple the capacity of typical parking areas, if you have the height available. Used indoors or outdoors, these lifts allow three parking spaces for a single spot. The unique units lack cumbersome mechanisms that project high over the top of the lift, allowing them to be used in more places than a traditional triple-stacker. Several feet of lift structure are eliminated, while maintaining a safe, stable, and revolutionary design. Additional facts and specs: * 7,000 lb. lift capacity for top platform, and 9,000 lb. lift capacity for center platform * Perfect for parking, storage, and service * Ideal for cars, trucks, and SUVs * Platforms feature full-length aluminum decking * Powerful hydraulic cylinders * Heavy-duty 3/8 in. lifting cable * Wide base-plate for maximum stability * Multi-position safety locks in each column * Adjustable lock ladders
Not Yet Reviewed
$21,895.00
Baileigh Industrial HSP-100A pneumatic shop presses deliver 100 tons of force and offers great value for the price. With a fully welded heavy plate steel structure, these air-powered presses will last for years in any shop. Features and benefits: * 31 in. working width * 11.8 in. stroke length controlled using foot pedal * 6.5 in. hydraulic cylinder moves left and right, helpful when you're making off-center parts * Hand-operated lever gives you the option for more delicate manual control * Industrial-grade hydraulic components cleanly deliver force to the project, providing years of trouble-free use * Includes a set of V-blocks
Not Yet Reviewed
$9,799.99
Save time and money with a Ranger combo package. They offer the R980XR tire changer and the DST30P wheel balancer together, equipping your garage with state-of-the-art machines. Here are the features of each piece: Most repair shops service everyday commuter cars, pickups and SUVs. These vehicles have tires and wheels that are relatively easy to work with, so they don't require much in the way of features and add-ons. Such specialty tools are best left for working with aluminum wheels, run-flats, and low-profile tires. Some shops simply want a space-saver that performs basic tire changes quickly and safely. The Ranger R980XR is ideal for such environments. It installs flush against the wall, so it stays out of the way, and the included non-marring duckheads are perfect for a wide variety of wheels. Additional details on the R980XR: * Wheel clamping method (adjustable clamps) * Table clamping system * Bead breaking system * Power assist towers * Tool holder * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Water filter * Oiler / lubricator * Air regulator * Breaker bar * Large soap / lubricator bucket * Brush * Alloy-steel mount/de-mount head * Plastic-polymer mount/de-mount head * Tower design * Bead lifting roller(s) * Upper bead assist roller * Traveling drop-center hold-down device * Inflation restraint device * Bead seating system * Tool tray / bin storage * Motorcycle turntable clamps * Style: Swing arm * 30 in. clamping capacity The Ranger DST30P accurately and efficiently calibrates wheel and tire configurations. Like the DST-2420 wheel balancer, the DST30P handles wheels up to a 30 in. diameter. It also contains many of the same working components as the DST-2420 but with one exception: Ranger took the 64-tooth magnetic transducer encoder from the DST-64T and built it into this smaller unit for minimal yet incredibly precise wheel weight placements. The larger encoder features precision-cut square teeth to convert rotary position to a digital electronic signal, quickly achieving maximum profile and top-dead-center positioning. Additional details on the DST30P: * Dynamic, Static, and Performance Alloy settings * A multi-user save function holds presets to increase productivity * An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times * A simultaneous retrieval of static, dynamic, and ALU1/ALU2 data; identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button * Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors * Low-rpm balancing speed and rapid 6-second cycle time * Automatic braking * Gram/ounce selection and millimeter/inch selection * Automatic round-off with top-dead-center weight position indicator * Manual or automatic start when hood is lowered * Self-calibration function * High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools * Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel adhesive tape weight convenient bulk rolls * Precision-machined, hardened-steel 36mm shaft * Quick-release hub nut for dramatically reduced set-up times * Side-position brake hold wheels at precisely 12 o'clock for proper weight placement * Side cone storage pegs keeps accessories readily available * New "open-side" hood design allows for a broader coverage of tire shapes and sizes * Style: auto and light truck
Not Yet Reviewed
$8,295.00
Ranger R26FLT Super-Duty truck tire changers are efficient tools for changing tubeless truck, agricultural, and off-road tires from 14 in. to 26 in. diameter in just minutes. A portable remote control unit allows multiple functions for time-saving convenience. Ranger explored all aspects of truck wheel service to devise the fastest floor-to-floor service, making your job easier and more profitable. The tire changers are built with forged, hardened, and ground components designed to resist scoring, grooving, and wear. This equipment is simple to operate, and engineered for speed and safety. Features include: * Super-duty electric motor and hydraulic drive for superior torque and wheel-holding power * Self-centering hydraulic clamping chuck * Heavy, tapered roller bearings and a dual-direction hydraulic motor provide smooth torque * Quick positioning and locking mount/demount arm * Hydraulic sled carriage for positioning, bead loosening, mounting, and demounting procedures * Single-piece frame for superior rigidity * Hydraulically operated spreader-type jaws ensure secure clamping of virtually all rims and off-road style wheels * Massive chuck spindle handles the heaviest loads * Sturdy spindle, chuck, and mount/demount head hydraulically rotates, raises, and lowers with simple operator controls * Very gentle on over-the-road tires and tubeless tires mounted on aluminum wheels
Not Yet Reviewed
$12,595.00
Ranger R76ATR tire changers are versatile time-savers. They have tilt-back towers that allow you to work different tire-and-wheel combos without adjusting the duck head, and the swing-arm design with tower assist ensures stiff sidewalls are never a problem. They are easy to operate and rugged enough to stand up to demanding workloads. The large 30 in. capacity turntable features adjustable, hardened-steel RimGuard wheel clamps, providing an internal clamping capacity of 9 in. to 28 in. and external clamping capacity of 10 in. to 30 in. Features: * Traveling drop-center hold-down device * Inflation system * Inflation gauge and air dump valve * Inflation pressure regulator/limiter * Oiler/lubricator * Air regulator * Bead tool/tire iron * Alloy steel mount/demount head * Nylon mount/demount head * Large soap bucket * Soap brush
Not Yet Reviewed
$7,295.00
OTC 25-ton heavy-duty open throat shop presses enables ram to be positioned outside of press frame for fast axle bearing removal and installation, as well as other tasks. Two models are offered with either an air/hydraulic pump or two-stage hand pump. Features, benefits, and contents: * Press bed is raised or lowered with a hand crank * Spring-return hydraulic ram is laterally adjustable for off-center work at full capacity * Hydraulic ram with 14 in. stroke * Gauge, hose, and pump mounting bracket
Not Yet Reviewed
$8,522.99
These OTC 6,000 lb. capacity revolver stands will handle the heaviest of engines. OTC designed these stands with a 96:1 ratio worm gear set, and the crank handle can be locked in any position. Their integral 12-ton jack raises the work to provide the swing radius needed for clearance.
Not Yet Reviewed
$8,838.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
