Availability
Showing In Stock Items. Show All 342 Items.
Proform slim wireless vehicle scale kits include the right equipment to ascend for victory. Proper setup equals successful performance, and these kits deliver the implements you need at an incredible price. They include powdercoated diecast aluminum pads, a wireless and backlit LCD screen, and a foam-lined, hard-shell case with heavy-duty wheels and handle for easier mobility. The LCD displays cross weight, side/side weight, and front/rear weight—in addition to the standard weight and percentage for each wheel, and total vehicle weight. A USB cable is also included for live stream data feed to your computer for viewing and file exporting. Each of the low-angle, drive-up (no ramps needed) scale pads features a 1,750 lb. capacity for a total scale capacity of 7,000 lbs., and they're accurate to within 1/10 of 1 percent. Weigh in on winning performance with a Proform slim wireless vehicle scale kit.
( 16 )
$1,059.95
Summit Racing™ Pro piston ring filers are designed for professional use and engine builders looking for accurate and affordable equipment. With a powerful 110 V or 220 V motor, the machines make quick work of even the toughest steel rings. The precision table action allows a full sweep across the griding wheel face for even wear and no unexpected highs or lows. This enables you to hit your target .001 in. clearance with a minimum of back and forth between the cylinder bore and reduce the chance for mistakes. Each Pro filer also includes a deburr wheel. The machines come in a wide variety of colors, including premium 2-stage candy finishes to match your shop equipment. They are designed and built in the USA with American-made materials.
( 24 )
$752.99
—
$765.99
Rimac Big Blue valve spring testers feature a pressure range up to 1,000 lbs.-in. These valuable tools can be easily bench-mounted for secure use. Since the 1920s, Rimac has been the industry standard when it comes to valve spring testing tools. Their flagship "Big Blue" unit will be an asset to any shop.
( 5 )
$1,006.95
These Proform vehicle scale kits can help you get your vehicle ready before you get to the race track. They can display each wheel weight, total vehicle weight, and percentage weight. The Proform vehicle scale kits include a large digital LCD backlit display, a durable carrying case, four AA batteries, and four 20 ft. cables marked for each of the four scales.
( 30 )
$900.95
John Dow 30-gallon UL listed steel gas caddies are designed for the professional automotive service facility. They're tested and approved to UL requirements for leakage, rupture, stability, abuse, and endurance. John Dow steel gas caddies meet OSHA-approved standards--with safety being a number one priority. Features and benefits include: * UL listed cast iron pump * 10 in. steel wheels * Fill level gauge * Fire-screened vent and filler neck * Wide footprint for stability * 8 ft. PVC suction/discharge hose with internal steel grounding wire * Tank ground wire and clamp * 2-way filter kit sold separately
( 3 )
$899.99
Total Seal precision power piston ring filers are the ultimate tools for precision piston ring grinding and among the finest filers available. They're extremely accurate and include an integrated dial indicator for precise read-outs. The filers are available in 110 or 220 V models and feature a smooth, high-output 1/15 hp ball bearing motor that operates at 3,000 rpm. Each Total Seal precision power ring filer includes a 3 in. x 1/8 in. grinding wheel, 2 1/2 in. x 1/2 in. de-burring wheel, and a diamond wheel dresser.
( 30 )
$899.95
Built for professionals, the Evolution mitering chop saws are the first 14 in. TCT industrial chop saw that allows you to produce accurate miter cuts without having to reposition the workpiece. They are designed to tackle heavy cuts in oversized metal pieces, and feature a precision adjustable miter table, 3-position saw head, and a unique, height adjustable front clamp rail assembly. These mitering chop saws deliver precise and quick angle adjustment for easy set-up and a powerful clamping mechanism to ensure quality, repeatable cuts every time. With a powerful 15A motor, easy ambidextrous controls, and a bench dog compatible base plate with a tough knurled back fence, the Evolution 14 in. mitering chop saws are easy to rely on—even for your toughest jobs. Features include: * 15A 120V 60Hz Motor * 1,450 rpm speed without load * Plus or minus 46 degree maximum bevel (left) * 10 ft cable length * 66 tooth 14 in. blade with 1 in. bore and 0.094 in. kerf included * Product dimensions assembled are 28.25 in. long x 26.00 in wide x 27.50 in. high * Product weight is 77 lbs. Cutting capacities: * 0.500 in. mild steel plate * 0.203 in. (13/64 in.) stainless steel plate * 4.75 in. x 4.75 in. square tube at 90 degrees * 4 in. x 4 in. square tube at 45 degrees ML * 1.75 in. x 1.75 in. square tube at 45 degrees MR * 6.5 in. x 4 in. rectangle tube at 90 degrees * 4.5 in. x 1.75 in. rectangle tube at 45 degrees * 4.75 in. round tube at 90 degrees * 4 in. mild steel round tube at 45 degrees * 5/16 in. minimum cut off piece length
( 5 )
$1,000.00
Convenience and quality come together in the design of B-G Racing's sturdy wheel and tire trolleys. Equally practical for transport in the pit and paddock, the trolleys are also great for storage back at the workshop. These shop carts are manufactured from high-grade mild steel with a durable gray powdercoat finish; and demountable tire-friendly round crossbeams reduce marking of tires. The units are available in 1300mm, 1500mm, or 1600mm internal lengths. The height of the top beams can be adjusted in three positions, depending on the diameter of the tires, and to reduce the overall trolley height. B-G trolleys also feature two fixed and two fully-rotating, locking and braking castor wheels, designed for strength and ease of movement around the pits, the paddock, workshop, and garage.
( 1 )
$770.27
—
$844.10
Campbell Hausfeld air compressor 2-stage pumps are designed to push some serious pressure. They feature stainless steel valves for long life, oil level sight glasses for easy checking, and are designed for an 80/20 duty cycle. The pumps are rated for heavy-duty commercial use in your new application, or as replacements for specific Campbell Hausfeld compressor models.
( 4 )
$874.99
—
$894.99
Their low-profile, 1 in. tall design allows Longacre turn plates to be used on top of scale pads and on the ground. They are manufactured from aluminum and are free-floating in two separate directions to eliminate bind. Longacre turn plates can measure -30 to +30 degrees in .5 degree increments for incredible accuracy.
( 6 )
$999.99
OEM Automotive Tools telescopic transmission jacks and a good hydraulic lift take the hassle out of pulling your vehicle's transmission. These heavy-duty steel jacks feature strong safety chains, tilt-adjustable saddles, and four heavy-duty castors on a wide base. The jacks come in handy for many uses around the shop, and their manual hydraulic systems make lifting and lowering items smooth and seamless. Whether they're being used for pulling, test fits, or installing, OEM telescopic transmission jacks make the job easier. They're available in models with different height ranges.
( 14 )
$1,076.50
Tired of slow and heavy jacks? AGM Products' manual jack system is the compact, lightweight solution to these problems. Its quick-release height adjustment clamp (change lift point on the fly), concave pad design (prevents pad sink in sand), and modular mounting system (locks the Jack to the vehicle) will give you confidence and peace of mind that whatever life throws at you, you'll fix it fast with the manual jack. Product specs: * 3,000 lbs. capacity * 14 in. travel * 17 in. external height adjustment * 11 lbs. * No sink pad design * Modular mounting system lets you use one of AGM's lift adapters (jack points or universal hook) or make your own
Not Yet Reviewed
$1,000.00
ARB twin portable air compressors are compact high-output pneumatic sources that permit rapid inflation of large tires, as well as the high-volume air needs of most air-powered tools. They're designed, built, and tested to commercial/industrial standards to survive harsh and demanding conditions. ARB twin portable air compressors feature: * Ultra-compact twin motor, dual-cylinder design for high flow * Integrated aluminum air tank and pressure switch regulates pressure between 135 psi (930kPa) and 150 psi (1030kPa), which suits most air-powered tools * Mounted in a waterproof carry case constructed from a durable impact-resistant polymer—with convenient compartments for storing the air hose and other compressor accessories * Ducted IP55 sealed brushed DC cooling fan and anodized aluminum motor mounting brackets effectively dissipate heat from the motors, heads, and electronics, allowing for a 100 percent duty cycle (under room temperature conditions) * Fully serviceable with replacement parts * Built with sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum trouble-free life * Motors are thermal cut-out protected against damage caused by extreme temperature use * High-density and high-flow washable sintered bronze air filter element * Pressure switch and relay-equipped electrical system prevents run-on when not filling, or any damage to compressor or hoses as a result of the pressure generated from a kinked air line * Over-pressure safety valve-equipped as a back-up protection from either pressure switch failure, thermal over-pressure generated in a hot vehicle, or accidental connection to an external high-pressure source
( 1 )
$1,059.95
Woodward Fab English wheels allow you to shrink, stretch, and custom-form up to 16-gauge steel with ease. These machines are for serious fabricators. Woodward Fab designed them to accommodate larger pieces—with a thread screw for height adjustments, and precision roller bearings on the upper and lower wheels. The frames are constructed from 1/4 in. thick steel tubing and have a durable painted finish. These English wheels include a painted sturdy steel base, a hardened steel upper wheel, five radiused lower anvils (2 3/8, 3, 5, 8 1/2, and 12 in.), a flat anvil, and a quick-release lever that makes lower anvil changes a snap. Select the model with throat depth and upper anvil diameter preferred for your applications.
( 2 )
$1,050.99
QuickTrick Alignment 5th Gen QuickString 4-wheel alignment systems allow you to check caster, camber, toe and thrust angle in one kit on any hard surface at an affordable price. No need to spend thousands of dollars when QuickTrick has you covered with complete accuracy for less. As always, this product enhancement is compatible with current 4th Gen kits for your convenience and savings. All components are interchangeable. The difference between the 4th Gen and 5th Gen QuickString is the added ability to check toe at each tire instead of total toe—AND check thrust angle to square your vehicle at the same time. This works with offset tires as well as standard. Different kits are available for a variety of wheel diameters. Kit components: * 4 caster/camber verticals * 2 QuickTrick digital gauges * 12 attachment pins with caps and Allen wrench * QuickTrick carrying case * 4 toe bars with QuickTrick stringer and string * 4 gauge attachment brackets (attached) * 4 QuickTrick backup bungees * Instructions
( 2 )
$785.95
—
$832.95
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$769.99
OTC 4,000 lb. folding floor cranes are sturdy steel units that fold up neatly for compact storage. They feature 3 1/2 in. front wheels, 5 7/8 in. rear casters, and a reach of 25 in. to 46 in. OTC 4,000 lb. folding floor cranes are great for small shops and garages.
( 1 )
$1,007.99
With simple 2-knob tapped control, the Lincoln Electric Easy-MIG 140 welders are easy to set up for gas-less flux-cored welding for deep penetration on thicker steel, or gas-shielded MIG welding on thin-gauge steel, stainless or aluminum. They feature smooth-arc starts with minimal spatter and a wide 30-140 amp welding output range. You can MIG weld 24 gauge up to 3/16 in. (4.8 mm) sheet metal in a single pass. Weld up to 5/16 in. (7.9 mm) steel using self-shielded Lincoln Electric Innershield (FCAW-S) wires. The special, precise wire drive gives brass-to-brass gun connections for enhanced connectivity and full adjustment to reduce the chance of wire tangling and crushing. Lincoln Electric Easy-MIG 140 welders' Power Chassis funnels in airflow to cool power systems, structurally secures key components, and traps wires and cables to avoid unnecessary abrasion.
( 7 )
$827.99
The Milwaukee M18 PACKOUT with VACLINK 9-gallon Dual Battery Dust Extractors set the standard for cordless dust extractors with strong performance and unmatched versatility. The automatic filter cleaning mechanism provides the highest sustained airflow to maintain productivity during dust extraction applications. This mechanism, paired with two HEPA filters, delivers OSHA Table 1 Compliance. The dust extractor tools have versatile power with corded and cordless capabilities for all-day productivity. With VACLINK, an integrated wireless dust control technology, compatible tools and remotes connect to the dust extractor, allowing for activation from the dust-producing application for increased efficiency. The POWERSTATE brushless motor delivers 125 cfm when utilizing M18 batteries (included in kit only) and 175 cfm when the unit is plugged-in. Two M18 REDLITHIUM FORGE HD12.0 batteries are required for operation (only included in the full kit with M18 charger). Please specify if ordering just the tool or if ordering the full kit with the included M18 batteries and M18 Dual Bay Simultaneous Super Charger. Product Highlights: * Optimized for concrete dust, drywall dust, and sawdust, the low flow indicator communicates if flow drops below optimal performance * Also capable of wet clean-up, water sensors indicate if the tank is full * Included 36mm x 10 ft. anti-static hose and attached hose clip connect to included power tool and table saw adapters that allow for efficient dust collection when paired with other tools * This extractor is PACKOUT compatible for convenient transportation and storage and offers ONE-KEY track and manage compatibility Bare Tool comes with the following components (except REDLITHIUM FORGE HD12.0 batteries and M18 Dual Bay Simultaneous Super Charger, included in full kit only): * M18 FUEL 9-gallon Dual Battery Dust Extractor with PACKOUT Compatibility and VACLINK * VACLINK Wireless Dust Control Remote * HEPA filter (2-pack) * 10 ft. Accessory Hose * Fleece Dust Bag * Power Tool Adapter * Table Saw Adapter
Not Yet Reviewed
$899.00
These Portatree full size practice trees are just what you need for practicing like a professional. They are national event quality available for you. These kits will require the Eliminator practice tree, sold separately, to run them.
( 2 )
$999.99
Summit Racing™ professional tool chest and roller cabinet combos are the ultimate in tool storage. These units feature double-wall construction, ball bearing drawer glides, and premium locking hardware. The upper tool chest features a top storage compartment with gas-charged struts, a built-in power strip with multiple outlets, as well as USB charging ports. The combos include locking latch-style drawers for easy opening and secure closing. Large compartments on the upper and lower cabinets are perfect for socket organizers and power tools. The bottom roller cabinet rolls on two swivel and two fixed casters. All drawers have full-length aluminum handles and slip-proof mats. We finished the whole thing off with the ultimate performance touch, a Summit Racing™ logo. Order the size needed for your garage or shop.
Not Yet Reviewed
$999.98
Proform's heavy-duty multiple angle piston vises feature the highest quality at an affordable price. The piston vises are constructed from billet aluminum and have a red anodized finish for durability. Able to accommodate pistons with up to a 4.50 in. diameter bore, the vises set up quickly and offer repeatability between pistons.
( 4 )
$767.99
On Sale
Sunex Tools engine stands are designed to position engines that need to be repaired or rebuilt. They have a fully adjustable mounting head and adapter fingers, as well as ball bearing mounted swivel casters. Some models have a space-saving folding design that is great for storage. The engine stands are available in 3- or 4-leg styles, with capacities from 1,000 to 2,000 lbs.
( 8 )
$850.99
$765.89
AutoTwirler Elite body carts are adjustable in width and length to fit most any vehicle style! They feature U-shaped channels to rest your project body or frame and provide a universal fit. The Elite body carts have telescopic sides for width and length adjustment, swivel cast iron casters with polyurethane, and they easily tear down for storage when not in use.
( 19 )
$841.99
—
$993.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
