Availability
Showing In Stock Items. Show All 48 Items.
Tuxedo lug adapters are available for their WB-CB66-VE wheel balancers or 40mm shaft setups. These components are part of their wheel balancer accessories that includes wheel lifts, lug adapters, and spacers. Get your wheel balancers and components from a company known for their commercial-grade reliability and toughness when you order Tuxedo wheel lug adapters for your balancer needs.
Not Yet Reviewed
$506.99
Building or refurbishing an engine is one of the most exciting endeavors a hobbyist can undertake. What's the next step after the engine build is complete? Take it for a test run on one of our Summit Racing™ engine run stands! These heavy-duty engine stands allow for a place to bolt a motor, then fire it up and run it for break-in, tuning, and to find and fix any problems, like leaks, before doing the final motor installation. The engine run stands are made from sturdy steel with a powdercoat finish for lasting service. They include threaded mounting posts to adjust engine mounts for proper height, and feature four sturdy, easy-roll casters with wheel lock to keep the unit from moving about. Take a test run you can trust with a Summit Racing™ engine run stand!
( 58 )
$731.99
Mittler Brothers rear-end narrowing tool kits are designed to narrow your vehicle's rear-end for racing or street rod applications using precision-made tools. They include a 1 1/2 in. diameter turned, ground, and polished shaft that is passed through the trimmed rear-end housing (not included) and the inner bearing blocks. This ensures the accurate, square, and true, reinstallation of the housing ends. The kits feature a pinion centering plate and a variety of alignment blocks for specific housing ends, including Ford 9 in., Ford 8.8 in., 10-bolt GM, 12-bolt GM, Dana 44, Dana 60, and 8 3/4 in. Chrysler.
( 11 )
$720.00
Need more power? Induction Innovations Mini-Ductor Venom HP portable induction heater tools are the highest powered Mini-Ductors available. They will remove seized nuts, bolts, bearings, fasteners, sensors, exterior trim, vinyl graphics, and more—in seconds, safely. Offering the same features and benefits as the Venom, the Venom HP models allow you to heat larger metal fasteners and components faster than ever before without the risk of collateral damage, burning yourself, or setting a fire with oxyacetylene torches. Extinguish the flame; choose the precise, safe, and reliable operation of Induction Innovations Mini-Ductor Venom HP portable induction heater tools. Mini-Ductor Venom HP features and inclusions: * Angled design with trigger * Coil twist lock * LED usage indicator * Fan operation enhancements * Fault override delay * 2-year warranty * Carry case, 7/8 in. pre-formed coil, U-form coil, Bearing Buddy coil
( 4 )
$584.10
Woodward Fab bead roller motor kits convert your manual bead roller to a power bead roller. They feature an extra-powerful 1/2 hp motor to help prevent stalling out on larger or wider beading operations—and include a forward and reverse switch. An industrial metal foot pedal allows you to vary the spindle speed at the pedal, instead of reaching around to adjust a control. These motors easily bolt onto the Super Bead Roller or the Woodward Fab WFBR6. The power units can also be adapted to fit most standard 22mm shafted machines.
( 9 )
$560.99
P-Ayr replica long blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting. Save time, money, and hassle when it comes time to install your next power plant.
( 88 )
$529.99
—
$734.99
Earl's Performance electric oil circulation pumps are ideal for circulating gear oil through an external oil cooler for cooling differentials or manual transmissions. These heavy-duty pumps feature a brass housing with a nickel plated finish and a 4-bolt mount with rubber vibration isolators. The compact design is durable enough to mount anywhere on the chassis or underhood. Earl's Performance electric oil circulation pumps feature: * Self-priming design with a flow rate of up to 2.1 gpm * Maximum oil weight of up to 90W * Lightweight 5.5 lbs. * 12 V with 10 amp draw * Maximum pressure of up to 72.5 psi * Compact dimensions: 6 1/2 in. tall x 4 5/8 in. wide x 3 3/4 in. deep
( 1 )
$549.95
Torque plates are bolted to the block deck while honing to simulate the stress applied to the bores when the heads are installed. If a cylinder is bored without a plate, once the head is installed, the bore will no longer be round at the top. Almost all factories routinely do this, as well as most engine shops. But torque plates allow an engine to break in faster, use less oil, and produce a little more power due to better ring sealing. ICT Billet engine block torque plates are specific to engine families and use factory length head bolts and studs. They are made from aerospace-grade billet aluminum.
( 17 )
$599.99
Milwaukee M18 FUEL variable speed polishers are cordless full-size hand-held rotary polishers. By harnessing the power, performance, and run-time of M18 FUEL battery technology, they deliver "corded performance" that allows you to power through the most demanding applications. These tools are lighter than corded models, and with the ability to deliver total control through a variable-speed dial and trigger, M18 FUEL polishers free you from the extra work, distractions, paint damage, and inconvenience caused by cords. They're equipped with rubber over-mold front housings (to protect paint from scratches in use), as well as removable dust covers to protect the motor and electronics from wool pad fibers and residue. Milwaukee M18 FUEL variable speed polishers are offered separately (tool only), or in kits with batteries, charger, and additional accessories. Order the diameter and other options you prefer. May include: * Backing pad * Screen cover * Side handle * Two M18 REDLITHIUM XC5.0 extended capacity battery pack (22 and 22P kits) * M18 and M12 Rapid charger (22 and 22P kits) * Wool cutting pad (22P kits only) * Yellow and black foam finishing pads (22P kits only) * Bail handle with two bolts (22P kits only)
( 2 )
$579.00
P-Ayr replica short blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting.
( 9 )
$597.99
—
$666.99
Stay prepared on the road with Roush Mustang trunk tool kits. These kits ensure you will never be caught without the essential tools needed for your Mustang. They include high-quality wrenches and a 3/8 in. socket set for the most common bolt sizes found in the 2015-21 Mustang. Also included are a flashlight, needle nose and slip-joint pliers, an accurate tire pressure gauge, Mechanix gloves, and a multi-bit screwdriver. The tool kits come with a trunk-mount toolbox fitted with a foam liner with cutouts for each tool. They feature Roush branding and they look as though they came from the factory.
Not Yet Reviewed
$589.99
Summit Bucks
AIRCAT 3/4 in. Super-Duty composite impact wrenches are built strong for industrial MRO (maintenance, repair, overhaul), fleet maintenance bus/large automotive use, large agricultural vehicles, and large bolt assembly. These powerful air tools are built with a hard-hitting "super clutch" twin hammer mechanism to increase blow frequency. They're available in multiple torque output levels. Super-Duty impact wrenches have comfortable ergonomic handles, and quiet-tuned exhausts. Choose the model that best suits your pneumatic tool needs.
Not Yet Reviewed
$505.00
—
$512.00
Dewalt 20 V MAX XR brushless cordless 1/2 in. high-torque impact wrenches include a hog ring anvil kit, allowing you to complete tough jobs. Dewalt's highest rated torque 1/2 in. impact wrench delivers up to 71 percent more torque, making it ideal for large sized pipe flanges, grooved couplings, wheel lugs, concrete anchor bolt setting, and many other heavy-duty impact wrench applications. Precision Wrench mode is included to help prevent overtightening in forward, and run-off in reverse, for user control, as well as a 4-mode push-button switch to easily change speeds for different applications. The hog ring anvil allows rapid, secure socket changes, and the Dewalt high-torque impact wrenches deliver 1,200 lb.-ft. of maximum fastening torque and 1,750 lb.-ft. of maximum breakaway torque. Kit contents: * 20 V MAX XR 1/2 in. high-torque impact wrench * 20 V MAX oil-resistant 5.0Ah battery * 12 V/20 V MAX/FlexVolt 4-amp charger -- 2-stage LED state of charge indicator -- Mounting capability * Kit bag
Not Yet Reviewed
$549.00
BendPak TC-3000 boat trailer tongue platforms are one-of-a-kind units that offer a safe and simple approach to get your boat trailers onto a BendPak 4-post lift. With rugged stainless steel construction, the tongue platforms extend 20 in. from 48 to 68 in. between the runways on a BendPak or any 4-post lift that has a minimum center of runway width of 48 in. They are rugged and secure and slide breezily between the post, similar to that of BendPak's 4-post bridge jacks. There are no bolts or cumbersome installation procedures required. The front wheel of your boat trailer fits securely into the wheel tray, so it won't slip around as you load the trailer. The two back wheels of your trailer simple glide onto the runways. Once secured on the car lift, lifting and lowering your boat trailer is just a matter of operating the lift like you would if a car or truck were loaded. Convert your lift into a nautical-lifting dream machine with affordable BendPak TC-3000 platforms.
Not Yet Reviewed
$575.00
Heli-Coil has the most effective and universally accepted method of thread repair. Heli-Coil inserts work in any part or material--aluminum, magnesium, cast iron, bronze, etc. Damaged threads can be restored to better-than-new condition in spark plug ports, carburetor fuel inlets, transmission housings, oil drain plugs, exhaust and intake manifolds, head bolt holes, brake calipers, and more. They are available in many sizes.
( 108 )
$507.99
Summit Bucks
Maintaining buses, trucks, and farm equipment--as well as large tire work, major engine teardowns, and spring bolt removal--requires a powerful tool. AIRCAT 1 in. aluminum heavy-duty pistol grip impact wrenches pack 200 to 1,850 ft.-lbs. of loosening torque into a hand-held air tool. These wrenches are built with a durable twin-hammer mechanism, and the D-type handle design includes an exhaust directed away from both the workplace and operator. They use a 1/2 in. NPT air inlet that allows for airflow pressure of 90 to 120 psi. AIRCAT impact wrenches are standard equipment in any mechanic's shop. If you perform heavy-duty machine or engine work, they're also an essential for you.
Not Yet Reviewed
$615.00
—
$693.00
Clearance
P-Ayr Replica transmissions are designed to bolt on to the engine for test fitting any fabrication you may need to make to the frame or chassis. They include mounting points to OEM specifications to ensure accuracy, and are made from durable polyurethane foam for long life.
( 30 )
$522.99
Baileigh Industrial BV-8M machine vises are built to last years in any shop. Designed with versatility in mind, they offer many features that other vises at this price don't have. Features: * 7 1/2 in. milling vise * Includes swiveling base * Can be removed from swivel base for fixed mounting * All steel and cast iron body * Reversible jaws for external work holding * 9 in. maximum jaw opening * 12 9/16 in. mount spacing (3/4 in. bolts) * 95 lbs.
Not Yet Reviewed
$668.99
John Dow air-operated diaphragm pumps come in an all-bolted durable construction for use in automotive and other applications. Rated for use with diesel, grease, kerosene, and oil, these UL and non-UL Listed pumps feature O-ring seals and nitrile diaphragm material, making them ideal for low-viscosity petroleum fluids. Features include: * Air-operated double diaphragm pump * 1 in. inlet/outlet * Heavy-duty aluminum construction * 1/4 in. air inlet * 24 gpm
Not Yet Reviewed
$746.99
When replacing components in your differential, you must reset the pinion depth. Yukon Gear & Axle offers a pinion depth setting tool for use on any differential housing. This universal-design kit includes all the necessary components to reset depth when rebuilding your differentials.
( 6 )
$694.89
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$598.99
Rhodes Race Cars rear end housing narrowing fixture kits allow you to "slim down" your rear end to get some additional clearance. Available with 60 in. or 72 in. lineup bar, each kit includes pinion centering plate, housing end outer pucks, and outer diameter inner pucks. Choose the kit preferred for your application.
( 1 )
$674.95
—
$699.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
