Availability
Showing In Stock Items. Show All 309 Items.
Proform slim wireless vehicle scale kits include the right equipment to ascend for victory. Proper setup equals successful performance, and these kits deliver the implements you need at an incredible price. They include powdercoated diecast aluminum pads, a wireless and backlit LCD screen, and a foam-lined, hard-shell case with heavy-duty wheels and handle for easier mobility. The LCD displays cross weight, side/side weight, and front/rear weight—in addition to the standard weight and percentage for each wheel, and total vehicle weight. A USB cable is also included for live stream data feed to your computer for viewing and file exporting. Each of the low-angle, drive-up (no ramps needed) scale pads features a 1,750 lb. capacity for a total scale capacity of 7,000 lbs., and they're accurate to within 1/10 of 1 percent. Weigh in on winning performance with a Proform slim wireless vehicle scale kit.
( 17 )
$1,059.95
Proform wireless vehicle scale kits are designed for the new frontier in chassis set-up! Using real track data and pull down technology to replicate actual chassis position, you're going to need a scale that can handle the forces of the track. This 14,000 lb system is a perfect way to make high capacity measurements accessible to weekend racers, not just Nascar, IndyCar, and F1. This system also has the latest Proform LCD display that includes a few new features. Standard features include thin 16 in. x 16 in. aluminum pads that can be driven onto, an LCD display with cross weight, side/side weight, and front/rear weight in addition to the standard weight and percentage for each wheel and total vehicle weight in both lbs. and kgs. And of course, backlit LCD screen and control buttons, and a foam lined hard case with wheels for storage.
( 2 )
$1,559.99
Sunex Tools telescopic transmission jacks allow you to efficiently remove, install, and transport transmissions and transfer cases on vehicles supported by lifts. They feature a universal saddle that has four ratcheting arms to quickly adjust to the transmission pan shape and a tie-down chain to secure the load. Wide base legs with swivel caster wheels keep Sunex Tools telescopic transmission jacks stable and easy to maneuver.
( 22 )
$1,221.99
Rimac Big Blue valve spring testers feature a pressure range up to 1,000 lbs.-in. These valuable tools can be easily bench-mounted for secure use. Since the 1920s, Rimac has been the industry standard when it comes to valve spring testing tools. Their flagship "Big Blue" unit will be an asset to any shop.
( 5 )
$1,006.95
Sunex Tools air/hydraulic telescopic transmission jacks are designed for use in the installation, removal, and transportation of transmissions and transfer cases on vehicles that are supported by lifts. These jacks feature foot-activated pump and release pedals for hands-free ram raising and slow, controlled load lowering. Lowered telescopic rams enable the transmission to be moved from the jack to the work table and extend to reach a maximum height of 74 in. Their universal saddles with four ratcheting arms adjust quickly to the transmission pan configuration with a nylon tie-down to secure the load. Sunex Tools air/hydraulic telescopic transmission jacks are made with an overload safety valve, preventing them from being used beyond their rated capacity. These jacks feature a wide base with swivel casters on the legs and polyurethane tread wheels for stable, easy maneuvering. Locking caster wheels prevent the jacks from moving when they're at your desired location.
( 11 )
$1,459.99
Many races come down to reaction time, which is why you need to use Portatree Eliminator Next Gen with National Event Tree practice trees. They combine cutting-edge technology with traditional features, allowing for the use of all original Eliminator accessories, including foot pedals and vehicle connectors. National Event Trees feature dual pre-stage and stage bulbs, with flood lamps staged in accordance with NHRA and IHRA trees. Not only are they Portatree's most popular full-sized practice trees, but thanks to 100 percent aluminum construction and a 25 lb. steel base stand, they're used on many smaller asphalt, dirt, and snowmobile tracks. Some systems include a 2 x 15 in. LED character message display showing reaction time and other information. They do not include any mounting or hanging hardware and are recommended for indoor use. Check part notes for included items. Whether you're practicing or having weekend runs, be prepared with Portatree Eliminator Next Gen with National Event Tree practice trees.
( 5 )
$1,342.99
These Portatree full size practice trees are just what you need for practicing like a professional. They are national event quality available for you. These kits will require the Eliminator practice tree, sold separately, to run them.
( 2 )
$1,302.99
AC Hydraulic WJN10-EUR engine cranes with parallel legs for pallets are built from a sturdy, heavy-gauge steel construction with a hard chromium plated ram and pump piston for long service life. Featuring a built-in safety overload valve, these engine cranes are fitted with two castors and two fixed wheels for easy maneuverability—even with maximum load. WJN10-EUR engine crane features: * Robust steel frame construction * Hard chromium plated ram and pump piston for long life * Jib arm with large lifting capacity—even in 5th position * Fitted with (2) castors and (2) fixed wheels for easy maneuverability even with maximum load * Hand operated release for optimum safety whilst lowering * Lifting hook pivots 360 degree tilt * Built-in safety overload valve * Foldable within seconds for quick and easy storage—when folded the crane takes up a minimum of space on the workshop floor
( 1 )
$1,155.20
Summit Racing™ 72 in. rolling cabinets offer quality mobile tool storage for your garage or shop. They will keep your tools easily accessible and safe. Plus, with 16 drawers (one top right, 6 left, 4 right, and 5 middle) they will help to keep your tools tidy, organized, and ready to work right beside you.
( 1 )
$1,599.99
Basically, used to make smooth radius curves in sheet metal, shrinker/stretchers are indispensable metal forming tools that allow you to shape metal without heat, cutting, or welding. Woodward Fab shrinker/stretchers are the ideal tools for creating repair panels for wheel openings, windshields, and other sheet metal projects. They offer bench/vise mount models and combos, portable versions, and units with foot-operated stands. All of them feature heavy-duty construction, strong jaws, and (depending on model) will work up to 16- or 18-gauge mild steel and 14- to 16-gauge aluminum. Choose the shrinker/stretcher best suited for your fabricating needs.
( 11 )
$1,284.99
Portatree Eliminator Next Gen with mini tree practice trees allow you to work on reaction time almost anywhere. They're small enough to pack and take to the office, on a trip, or to the track. Eliminator Next Gen's have cutting-edge technology and are compatible with original Eliminator accessories. The 36 in. tall practice trees are half the size of Portatree's National Event tree, making them easy to move around. They feature incandescent bulbs which makes training a lot more realistic. So get ready for your next race with a Portatree Eliminator Next Gen with mini tree practice tree.
( 1 )
$1,152.99
Make crisp sheet metal bends quickly and accurately with Woodward Fab's box and pan bending brakes. These sturdy brakes have a solid welded frame, bending angle stops, and 16 removable fingers for consistency and precision. The 24 in. brakes will bend up to 20-gauge sheet metal, and the 48 in. brakes handle up to 16-gauge stock.
( 34 )
$1,556.99
Campbell Hausfeld air compressor 2-stage pumps are designed to push some serious pressure. They feature stainless steel valves for long life, oil level sight glasses for easy checking, and are designed for an 80/20 duty cycle. The pumps are rated for heavy-duty commercial use in your new application, or as replacements for specific Campbell Hausfeld compressor models.
( 4 )
$1,092.99
—
$1,117.99
Lenco auto body spot welders are designed to produce factory-type spot welds in seconds. They're simple to operate--simply press the two electrode guns against the welding surface, press the button, and the welders do the work. You'll get two spot welds every time. The time of the welds is automatically controlled by solid-state electronic circuitry. You'll have no guesswork, no gasses or wire to buy, no flame, and perfect welds time after time, panel after panel. Additional features include: * 50 ft. power input cable, number 10/3 wire * 5 ft. welding cable * 20-gauge steel maximum welding capacity * Weight is 110 lbs. * Protected control panel * Solid-state timer * Tool storage space * Off and on switch * Easy portability * Primary voltage: 208/230 * Single phase: 60/50Hz KVA * 50 amp line fuse * 20.500 in. height x 11.000 in. width x 16.000 in. length
( 1 )
$1,225.99
Milwaukee's M18 FUEL 7-tool combo kit delivers the most advanced 18-volt cordless drilling, fastening, and cutting technology in the industry. This power tool kit features seven M18 FUEL 18 V lithium-ion brushless cordless tools, including a 1/2 in. hammer drill, 1/4 in. impact driver, 1/2 in. mid-torque impact wrench, SAWZALL reciprocating saw, 6 1/2 in. circular saw, 4 1/2 in. / 5 in. grinder, and LED work light. M18 FUEL is fully compatible with the Milwaukee M18 Cordless system, featuring over 250 tools. M18 FUEL boasts the most advanced cordless technology in the industry, with a Powerstate Brushless Motor, REDLINK PLUS Intelligence, and REDLITHIUM Battery Technology—for longer motor life, longer run time, and more power. Combo tool kit includes: * M18 FUEL 1/2 in. Hammer Drill/Driver * M18 FUEL 1/4 in. Hex Impact Driver * M18 FUEL SAWZALL Reciprocating Saw * M18 FUEL 6 1/2 in. Circular Saw (tool only) * M18 FUEL 4 1/2 in. / 5 in. Braking Grinder Paddle Switch, No-Lock * M18 FUEL 1/2 in. Mid-Torque Impact Wrench with Friction Ring * M18 Work Light * Two M18 REDLITHIUM XC5.0 Extended Capacity Battery Packs * M18 and M12 Multi-Voltage Charger * Storage Bag
Not Yet Reviewed
$1,249.00
Their low-profile, 1 in. tall design allows Longacre turn plates to be used on top of scale pads and on the ground. They are manufactured from aluminum and are free-floating in two separate directions to eliminate bind. Longacre turn plates can measure -30 to +30 degrees in .5 degree increments for incredible accuracy.
( 6 )
$1,019.99
These Intercomp Racing valve spring testers provide high accuracy and repeatability with digital force and travel indication. They're excellent for valve, clutch, shock, and pressure relief springs. These valve spring testers are portable, offer push button on/off and zero to make them user-friendly, and are backlit for night use.
( 2 )
$1,495.00
The right weight distribution enhances performance on the track. With a large, easy-to-read display of weights and percentages, Intercomp SW500 E-Z Weigh Kart scale systems provide you with the data to become a front runner. They allow you to view any combination of scale pad weight and percentages, calculate center of gravity, check baseline setup, store 100 chassis setups, and displays setups to .01 of a percent for an almost perfect chassis setup. Intercomp Racing SW500 E-Z Weigh Kart scale systems include strong T-6061 aluminum scale pads, cabled indicator with large backlighted display characters, case, and a standard 9-volt battery. Go kart racing with Intercomp.
( 4 )
$1,395.00
OTC 4,000 lb. folding floor cranes are sturdy steel units that fold up neatly for compact storage. They feature 3 1/2 in. front wheels, 5 7/8 in. rear casters, and a reach of 25 in. to 46 in. OTC 4,000 lb. folding floor cranes are great for small shops and garages.
( 1 )
$1,096.99
AutoTwirler Body Cart PRO auto body carts are the company's largest and most supportive universal models. If you perform body or restoration work, one of these carts is where it all begins. With eight adjustable body mounts and a 3,000 lb. rating, the PRO is phenomenal for Corvettes, T-Birds, or other fiberglass bodies, in particular. The carts spin on four 8 in. polyurethane (over cast iron) casters, and are adjustable in height from 23 in. to 32 in. Choose your finish: bare steel, or red or blue powder coating. AutoTwirler…kind of says it all, doesn't it?
( 5 )
$1,394.99
—
$1,597.99
BendPak's Deluxe alignment lift turnplates make their alignment lifts beefier and more accurate than ever. They are larger, sturdier, and feature more underside rollers than their previous design, making them a great reason to choose BendPak for all wheel aligning needs. BendPak Deluxe turnplates feature a robust, industrial-grade design of aluminum alloy and stainless steel construction with heavy-duty encapsulated Delrin® bearings for increased support and smoother movement. They include two hardened rubber "popsicle stick" rollback bridges that eliminate the gap between the turn plates and lift runways for a smooth transition during rollback procedures or when loading and unloading vehicles. Additional features: * Stable tri-channel ball retainers provide better performance, minimize service, and maintenance * Free-floating 360 degree movement in all directions * 2 in. movement in any direction from center point * Oversized 14 in. diameter gauge accommodates all wheel types * Synthetic polymer underside slider allows easy movement of turn plates along runway surfaces * Auto-centering design * Built-in handles for easy transport * Greaseless operation--no maintenance or mess * Low-profile design * Dual angled locking pins * Powdercoated for extended lifespan
( 1 )
$1,325.00
Milwaukee's M18 FUEL 21 in. self-propelled dual battery mowers are designed to deliver the performance, durability, and ergonomic needs of landscape maintenance professionals. The optimized steel deck design paired with higher blade speed allows the Milwaukee mower to achieve superior airflow and increased lift to deliver the best cut quality in mulching, bagging, and side discharge applications. The POWERSTATE brushless motor delivers more max torque than 200cc gas to take on the most demanding mowing applications. The REDLINK PLUS Intelligence has total system communication between the Milwaukee tool and battery for unmatched levels of performance, protection, and productivity. The advanced electronic package also delivers an instant throttle response on both the blade and drive motors to reach full throttle in under one second, which increases the users control and productivity. The M18 FUEL 21 in. self-propelled dual battery mower by Milwaukee requires two M18 REDLITHIUM batteries which are included for the mower operation. Additional attributes: * Includes M18 FUEL 21 in. self-propelled dual battery mower, two M18 REDLITHIUM high-output HD 12.0 battery packs, M18 dual bay simultaneous rapid charger, one grass bag, mulch plug, one rear side discharge chute * Steel deck with 21 in. cut capacity * Single point height adjustment delivers 1 in. up to 4 in. height range with 7-positions at 1/2 in. increments * High lift mode delivers blade speed for superior airflow and increased lift * Folding handles with vertical storage allows for compact storage * Ergonomic handle design with recessed bail bar * Rear wheel self-propelled with active speed management from 0 to 4 mph * 3-in-1 grass management: mulch, bag and rear side discharge * Front and side LED lights allow for 180-degree visibility in low light conditions * Two deck handles deliver grasping points for lifting mower in and out of storage and transport * No gas headaches: no pull start, no engine maintenance, low noise, no emissions, less vibrations * Part of the Milwaukee M18 system, fully compatible with 200+ solutions
Not Yet Reviewed
$1,199.00
Baileigh Industrial PH-24A pneumatic planishing hammers have a capacity of 16-gauge mild steel—with a large throat depth of 24 in. The 4 in. x 4 in. fully welded frame makes them very ridged for the most precise work; and the main shaft is made from stainless steel for long life. These machines are perfect for any shop, because they only require 90-120 psi to operate. Baileigh planishing hammers are capable of landing 4,600 blows per minute with enough power to handle almost any job. They include a foot pedal, air filter, oiler, and nine radius dies.
( 3 )
$1,517.99
Mittler Brothers 3 ton manual bench presses speed up your metal fabrication. These presses have a rugged 3/8 in. plate construction that provides ample support, even when working with heavier materials. They are designed for use with standard punch and dies for round, oblong, and square holes, and the base is predrilled for mounting on a workbench or pedestal. They can be used as a standard arbor press, as well. Other features include: * Spring-loaded center * Slug ejector assembly * Lower punch/flare adapter and bolt * Upper punch/flare adapter and bolt * Arbor nut wrench * Bronze bushings * 12 in. throat depth
( 1 )
$1,035.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
