Availability
Showing In Stock Items. Show All 301 Items.
Proform slim wireless vehicle scale kits include the right equipment to ascend for victory. Proper setup equals successful performance, and these kits deliver the implements you need at an incredible price. They include powdercoated diecast aluminum pads, a wireless and backlit LCD screen, and a foam-lined, hard-shell case with heavy-duty wheels and handle for easier mobility. The LCD displays cross weight, side/side weight, and front/rear weight—in addition to the standard weight and percentage for each wheel, and total vehicle weight. A USB cable is also included for live stream data feed to your computer for viewing and file exporting. Each of the low-angle, drive-up (no ramps needed) scale pads features a 1,750 lb. capacity for a total scale capacity of 7,000 lbs., and they're accurate to within 1/10 of 1 percent. Weigh in on winning performance with a Proform slim wireless vehicle scale kit.
( 17 )
$1,059.95
Proform wireless vehicle scale kits are designed for the new frontier in chassis set-up! Using real track data and pull down technology to replicate actual chassis position, you're going to need a scale that can handle the forces of the track. This 14,000 lb system is a perfect way to make high capacity measurements accessible to weekend racers, not just Nascar, IndyCar, and F1. This system also has the latest Proform LCD display that includes a few new features. Standard features include thin 16 in. x 16 in. aluminum pads that can be driven onto, an LCD display with cross weight, side/side weight, and front/rear weight in addition to the standard weight and percentage for each wheel and total vehicle weight in both lbs. and kgs. And of course, backlit LCD screen and control buttons, and a foam lined hard case with wheels for storage.
( 2 )
$1,559.99
Sunex Tools air/hydraulic telescopic transmission jacks are designed for use in the installation, removal, and transportation of transmissions and transfer cases on vehicles that are supported by lifts. These jacks feature foot-activated pump and release pedals for hands-free ram raising and slow, controlled load lowering. Lowered telescopic rams enable the transmission to be moved from the jack to the work table and extend to reach a maximum height of 74 in. Their universal saddles with four ratcheting arms adjust quickly to the transmission pan configuration with a nylon tie-down to secure the load. Sunex Tools air/hydraulic telescopic transmission jacks are made with an overload safety valve, preventing them from being used beyond their rated capacity. These jacks feature a wide base with swivel casters on the legs and polyurethane tread wheels for stable, easy maneuvering. Locking caster wheels prevent the jacks from moving when they're at your desired location.
( 11 )
$1,459.99
Sunex Tools telescopic transmission jacks allow you to efficiently remove, install, and transport transmissions and transfer cases on vehicles supported by lifts. They feature a universal saddle that has four ratcheting arms to quickly adjust to the transmission pan shape and a tie-down chain to secure the load. Wide base legs with swivel caster wheels keep Sunex Tools telescopic transmission jacks stable and easy to maneuver.
( 22 )
$1,221.99
Rimac Big Blue valve spring testers feature a pressure range up to 1,000 lbs.-in. These valuable tools can be easily bench-mounted for secure use. Since the 1920s, Rimac has been the industry standard when it comes to valve spring testing tools. Their flagship "Big Blue" unit will be an asset to any shop.
( 5 )
$1,006.95
Make crisp sheet metal bends quickly and accurately with Woodward Fab's box and pan bending brakes. These sturdy brakes have a solid welded frame, bending angle stops, and 16 removable fingers for consistency and precision. The 24 in. brakes will bend up to 20-gauge sheet metal, and the 48 in. brakes handle up to 16-gauge stock.
( 34 )
$1,556.99
Many races come down to reaction time, which is why you need to use Portatree Eliminator Next Gen with National Event Tree practice trees. They combine cutting-edge technology with traditional features, allowing for the use of all original Eliminator accessories, including foot pedals and vehicle connectors. National Event Trees feature dual pre-stage and stage bulbs, with flood lamps staged in accordance with NHRA and IHRA trees. Not only are they Portatree's most popular full-sized practice trees, but thanks to 100 percent aluminum construction and a 25 lb. steel base stand, they're used on many smaller asphalt, dirt, and snowmobile tracks. Some systems include a 2 x 15 in. LED character message display showing reaction time and other information. They do not include any mounting or hanging hardware and are recommended for indoor use. Check part notes for included items. Whether you're practicing or having weekend runs, be prepared with Portatree Eliminator Next Gen with National Event Tree practice trees.
( 5 )
$1,342.99
Campbell Hausfeld air compressor 2-stage pumps are designed to push some serious pressure. They feature stainless steel valves for long life, oil level sight glasses for easy checking, and are designed for an 80/20 duty cycle. The pumps are rated for heavy-duty commercial use in your new application, or as replacements for specific Campbell Hausfeld compressor models.
( 4 )
$1,092.99
—
$1,117.99
These Portatree full size practice trees are just what you need for practicing like a professional. They are national event quality available for you. These kits will require the Eliminator practice tree, sold separately, to run them.
( 2 )
$1,302.99
Basically, used to make smooth radius curves in sheet metal, shrinker/stretchers are indispensable metal forming tools that allow you to shape metal without heat, cutting, or welding. Woodward Fab shrinker/stretchers are the ideal tools for creating repair panels for wheel openings, windshields, and other sheet metal projects. They offer bench/vise mount models and combos, portable versions, and units with foot-operated stands. All of them feature heavy-duty construction, strong jaws, and (depending on model) will work up to 16- or 18-gauge mild steel and 14- to 16-gauge aluminum. Choose the shrinker/stretcher best suited for your fabricating needs.
( 11 )
$1,284.99
AC Hydraulic WJN10-EUR engine cranes with parallel legs for pallets are built from a sturdy, heavy-gauge steel construction with a hard chromium plated ram and pump piston for long service life. Featuring a built-in safety overload valve, these engine cranes are fitted with two castors and two fixed wheels for easy maneuverability—even with maximum load. WJN10-EUR engine crane features: * Robust steel frame construction * Hard chromium plated ram and pump piston for long life * Jib arm with large lifting capacity—even in 5th position * Fitted with (2) castors and (2) fixed wheels for easy maneuverability even with maximum load * Hand operated release for optimum safety whilst lowering * Lifting hook pivots 360 degree tilt * Built-in safety overload valve * Foldable within seconds for quick and easy storage—when folded the crane takes up a minimum of space on the workshop floor
( 1 )
$1,155.20
OTC 4,000 lb. folding floor cranes are sturdy steel units that fold up neatly for compact storage. They feature 3 1/2 in. front wheels, 5 7/8 in. rear casters, and a reach of 25 in. to 46 in. OTC 4,000 lb. folding floor cranes are great for small shops and garages.
( 1 )
$1,137.99
OEM Automotive Tools telescopic transmission jacks and a good hydraulic lift take the hassle out of pulling your vehicle's transmission. These heavy-duty steel jacks feature strong safety chains, tilt-adjustable saddles, and four heavy-duty castors on a wide base. The jacks come in handy for many uses around the shop, and their manual hydraulic systems make lifting and lowering items smooth and seamless. Whether they're being used for pulling, test fits, or installing, OEM telescopic transmission jacks make the job easier. They're available in models with different height ranges.
( 14 )
$1,099.99
These Intercomp Racing valve spring testers provide high accuracy and repeatability with digital force and travel indication. They're excellent for valve, clutch, shock, and pressure relief springs. These valve spring testers are portable, offer push button on/off and zero to make them user-friendly, and are backlit for night use.
( 2 )
$1,495.00
Milwaukee's M18 FUEL 7-tool combo kit delivers the most advanced 18-volt cordless drilling, fastening, and cutting technology in the industry. This power tool kit features seven M18 FUEL 18 V lithium-ion brushless cordless tools, including a 1/2 in. hammer drill, 1/4 in. impact driver, 1/2 in. mid-torque impact wrench, SAWZALL reciprocating saw, 6 1/2 in. circular saw, 4 1/2 in. / 5 in. grinder, and LED work light. M18 FUEL is fully compatible with the Milwaukee M18 Cordless system, featuring over 250 tools. M18 FUEL boasts the most advanced cordless technology in the industry, with a Powerstate Brushless Motor, REDLINK PLUS Intelligence, and REDLITHIUM Battery Technology—for longer motor life, longer run time, and more power. Combo tool kit includes: * M18 FUEL 1/2 in. Hammer Drill/Driver * M18 FUEL 1/4 in. Hex Impact Driver * M18 FUEL SAWZALL Reciprocating Saw * M18 FUEL 6 1/2 in. Circular Saw (tool only) * M18 FUEL 4 1/2 in. / 5 in. Braking Grinder Paddle Switch, No-Lock * M18 FUEL 1/2 in. Mid-Torque Impact Wrench with Friction Ring * M18 Work Light * Two M18 REDLITHIUM XC5.0 Extended Capacity Battery Packs * M18 and M12 Multi-Voltage Charger * Storage Bag
Not Yet Reviewed
$1,249.00
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,539.99
Portatree Eliminator Next Gen with mini tree practice trees allow you to work on reaction time almost anywhere. They're small enough to pack and take to the office, on a trip, or to the track. Eliminator Next Gen's have cutting-edge technology and are compatible with original Eliminator accessories. The 36 in. tall practice trees are half the size of Portatree's National Event tree, making them easy to move around. They feature incandescent bulbs which makes training a lot more realistic. So get ready for your next race with a Portatree Eliminator Next Gen with mini tree practice tree.
( 1 )
$1,152.99
OTC Nozlrater diesel injector nozzle testers are the ultimate tools for diagnosing several problems that affect diesel fuel injector nozzles. They accommodate a wide range of injectors and enable you to check for leakage, pop-off pressure, spray pattern, and chatter. Nozlrater testers feature a rugged, lightweight reservoir that holds 7/10 of a gallon of fuel and are equipped with a replaceable 2-micron filter. Each unit features a large, dual-scale, high-pressure gauge protected by a guard and includes an indicator needle to record maximum pressure reached. OTC Nozlrater diesel injector nozzle testers are light enough to be easily carried for field use, or you can bench mount them using the holes in the base.
Not Yet Reviewed
$1,300.99
AutoTwirler Body Cart PRO auto body carts are the company's largest and most supportive universal models. If you perform body or restoration work, one of these carts is where it all begins. With eight adjustable body mounts and a 3,000 lb. rating, the PRO is phenomenal for Corvettes, T-Birds, or other fiberglass bodies, in particular. The carts spin on four 8 in. polyurethane (over cast iron) casters, and are adjustable in height from 23 in. to 32 in. Choose your finish: bare steel, or red or blue powder coating. AutoTwirler…kind of says it all, doesn't it?
( 5 )
$1,394.99
—
$1,597.99
OTC high performance hydraulic rams are made for strength, safety, and performance. These OTC hydraulic rams feature threaded ram collars and internal base threads to simplify mounting, as well as threaded piston rod ends. These hydraulic rams are a great replacement for worn-out leaky rams on body and frame equipment.
( 2 )
$1,202.99
—
$1,366.99
The Lincoln Electric Weld-Pak 180i MP DV Welders are built for hardworking professionals, but easy enough for anyone to use regardless of skill level. Requiring common 120 V input power or 230 V input power, the Weld-Pak 180i MP DV welders can be used almost anywhere—the shop, farm, home, or auto body shops! With simple two knob control, the machine is easy to set up for gasless flux-cored welding for deep penetration on thicker steel, gas-shielded MIG-welding on thin gauge steel, stainless or aluminum, stick-welding, or DC TIG-welding. For all your welding needs, the smart choice is Lincoln Electric products. Features, specs, and benefits: * Compact design, lightweight and portable at 34.5 lbs. * Conveniently plugs into household 230-volt or 120-volt power with included adaptor * Fully adjustable drive system reduces the chance of wire tangling and crushing * Brass-to-brass gun connection enhances conductivity * Durable cast aluminum gear box delivers added drive torque and quiet operation * Easy-turn numeric drive tension indicator identifies optimized ranges for different wire types Capable performance: * Forgiving arc makes dialing in your application easy * Smooth arc starts with minimal spatter * Wide 20-180 amp welding output range for MIG, FCAW and Spool Gun * Wide 10-165 amp welding output range for DC TIG * Wide 25 to 160 amp welding output range for Stick * MIG-weld 24-gauge up to 5/16 in. sheet metal in a single pass. Weld-up to 5/16 in. steel using self-shielded Lincoln Electric NR-211-MP wires. Stick-weld to 3/16 in. (4.8 mm), and TIG-weld to 1/8 in. (3.1 mm) * Optional TIG-torch and optional foot pedal for remote control of weld output while TIG-welding (sold separately) * Optional spool gun for MIG-welding aluminum up to 3/16 in. (sold separately) What's included: * Gun Magnum Pro 100L gun and 10 ft. (3.0 m) cable assembly with brass connection and 8-pin trigger connector (K530-7) * .025 in. (0.6 mm) and .035 in. (0.9 mm) contact tips (KH831 and KH832) (qty. 1 each size) * Gasless nozzle for inner shield welding (KH836) * Gas nozzle for MIG welding (KH835) * Spindle adapter for 8 in. (203 mm) diameter spools (KH720) * .025 - .035 in. (0.6 - 0.9 mm) wire diameter dual track drive roll for MIG and flux-cored welding (KP2948-1) Shielding Gas Apparatus Harris® 3000290 Gas Regulator (S25805) and 52 in. (1.3 m) hose (S19303) for use with Ar/CO2 blend gases and for use with CO2 shielding gas * Work clamp and 10 ft. (3.0 m) cable * Instruction manual, and quick start guide * Electrode holder with 10 ft. cable
( 1 )
$1,153.99
The right weight distribution enhances performance on the track. With a large, easy-to-read display of weights and percentages, Intercomp SW500 E-Z Weigh Kart scale systems provide you with the data to become a front runner. They allow you to view any combination of scale pad weight and percentages, calculate center of gravity, check baseline setup, store 100 chassis setups, and displays setups to .01 of a percent for an almost perfect chassis setup. Intercomp Racing SW500 E-Z Weigh Kart scale systems include strong T-6061 aluminum scale pads, cabled indicator with large backlighted display characters, case, and a standard 9-volt battery. Go kart racing with Intercomp.
( 4 )
$1,395.00
Lenco auto body spot welders are designed to produce factory-type spot welds in seconds. They're simple to operate--simply press the two electrode guns against the welding surface, press the button, and the welders do the work. You'll get two spot welds every time. The time of the welds is automatically controlled by solid-state electronic circuitry. You'll have no guesswork, no gasses or wire to buy, no flame, and perfect welds time after time, panel after panel. Additional features include: * 50 ft. power input cable, number 10/3 wire * 5 ft. welding cable * 20-gauge steel maximum welding capacity * Weight is 110 lbs. * Protected control panel * Solid-state timer * Tool storage space * Off and on switch * Easy portability * Primary voltage: 208/230 * Single phase: 60/50Hz KVA * 50 amp line fuse * 20.500 in. height x 11.000 in. width x 16.000 in. length
( 1 )
$1,225.99
These high-quality metalworking tools manufactured by Martin Tools are hand-ground and polished to the perfect shape for bodywork and are balanced for ease of use. Choose from a wide variety of specialty and general-purpose hammers, dollies, and spoons. Whether you are smoothing, shrinking, raising, or stretching, Martin Tool & Forge has just the right tool for the job! Martin Tool hammers are available in your choice of classic hickory or fiberglass handles. The cushioned fiberglass handles offer improved durability and comfort.
( 25 )
$1,186.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
