Availability
Showing In Stock Items. Show All 21 Items.
Put down the hammer and step away from your engine! Summit Racing™ has a better, easier way to put a harmonic balancer on your engine—one of these GM LS installation tools. These simple-to-use quality tools provide you with a hassle-free option to complete the setup. They're available in different styles for a variety of applications. Having the right tools for the job can make your life easier. Order the Summit Racing™ harmonic balancer installation tool that best suits your needs.
( 166 )
$51.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$248.99
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 73 )
$94.99
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
Not Yet Reviewed
$177.99
Summit Bucks
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 49 )
$45.99
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$50.99
—
$113.99
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$56.69
—
$62.95
Dorman rear crankshaft oil seal installers are convenient and valuable tools for use for when replacing the rear main seal cover on specified vehicle applications. These must-have tools ensure the cover is properly aligned on the crankshaft to prevent damage and leaks. The tools machined from low-carbon steel, zinc-plated and then are clear-chromate-coated for durability.
( 1 )
$86.99
Lisle Duramax flexplate holder and socket kits are designed to lock flexplates in place when removing the harmonic balancer on 6.6L Chevrolet Duramax diesel engines with an Allison automatic transmission. They save time by locking the flexplate at the transmission instead of having to remove the starter for water pump replacement. Simply remove the metal spring-loaded inspection plate on the bottom of the transmission, and slide the tool into the opening toward the engine--with the top of the tool engaging the teeth of the flywheel. Use the included 36mm 12-point socket with 3/4 in. square drive to remove the harmonic balancer bolt and retorque upon installation.
( 24 )
$36.99
OTC flywheel holders are specialty tools that mount in place of the starter and engage the flywheel ring gear teeth. They hold the flywheel/engine stationary during removal of the hub bolt which must be removed to service the pulley assembly.
( 1 )
$132.99
Do you have tight confines? These Lisle harmonic damper pulley pullers make the job easier. These pullers are specifically designed to work in the tight confines of some engine bays. Their slim design and reworked geometry allow them to hold close to the pulley so that there is no need to pull the radiator or other difficult parts that might be in the way. The jaws are held in place with clevis pins and are easily removed for service, while the magnetic spacers make them ideal for certain applications that require them. Don't get caught with the wrong tool again--get one of these Lisle harmonic damper pulley pullers today.
( 3 )
$81.99
Lisle fuel injector remover and installer kits come with three application specific attachments. Remove the shoulder bolt to switch between the attachments. The injector puller can handle a variety of injectors that are commonly found in Cummins and Duramax engines. The two-jaw design firmly grips the injector while it is being removed by the slide hammer. These kits save time and reduces the likelihood of damaging the injector or head.
Not Yet Reviewed
$200.99
Lisle flywheel stops save time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Just remove the rubber inspection cap on the bottom of the transmission, insert the tool at the front of the opening to engage the flywheel, then hand-tighten the bolt to hold the stop in place.
Not Yet Reviewed
$14.99
OTC camshaft retaining tools are oversized retaining plates that lock camshafts together at top dead center. These 3-plate kits are used to tighten both sets of cams to prevent them from turning while setting timing. The OTC camshaft retaining tools extra-large size prevents valve covers from being installed with the plates in place, protecting the engine. When you need to get the job done right the first time, use quality tools from OTC.
Not Yet Reviewed
$59.99
OTC GM Duramax injector pullers make servicing your injectors easier than ever. With every diesel vehicle, service is important to keep them running strong and getting the fuel economy that you demand. OTC came through for your GM Duramax with their injector pullers. Simply install on the injector that needs to be pulled, use a box end wrench to turn the tool until the injector releases from the seat. It does not get much simpler than that.
( 3 )
$96.99
OTC injector seal installer and sizer adapters ensure replacement injectors and seals are installed correctly. Two different kits are available. Choose the appropriate one for your application. OTC kit 6757 installs the PTFE seal onto the end of the injector. The pilot cone is placed onto the end of the injector and the seal is started over the cone. The installer pushes the seal into the groove on the injector tip. The sizer goes over the seal to compress it back to the correct O.D. to allow installation into the cylinder head. OTC kit 6756 installs the dual seals onto the end of the injector. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head. Two seal installation pilots for each groove, a seal installer driver, and a compression sizer is included.
Not Yet Reviewed
$179.99
OTC injector retaining clip replacers ensure proper retention of the injector to the rail. These plier-type tools remove and install the injector retaining clips without over-spreading. For specialty GM service tools, OTC's lineup includes over 40 tools that will make maintenance and repairs easier.
Not Yet Reviewed
$176.99
Lisle water sensor wrenches are capable of removing and installing the water sensor on 2001 and later Duramax diesel engines. They are specifically designed to fit your sensor so that they do not cause damage or harm like pliers and other tools. Lisle water sensor wrenches are made of high-quality steel and have a rubberized handle for comfort and support while removing and installing your water sensor.
( 3 )
$10.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
