Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET SSR Tools & Shop Equipment
Showing In Stock Items. Show All 19 Items.
Proform Harmonic Balancer Puller and Installer Tools
Proform harmonic balancer puller and installer tools are equipped with a roller thrust bearing for easy installation. They may also be used for steering wheel installation and removal. These heavy-duty professional tools have a maximum recommended torque of 150 lbs.-ft. The tools are available in universal and application-specific models.
( 72 )
$119.99
Nickky Bobby Exhaust Gasket O-Ring Cutting Tools
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
Mr. Gasket Rear Main Seal Installation Tools
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$77.55
Mr. Gasket LS Timing Cover Alignment Tools
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$58.15
—
$64.55
MotoRad Cooling System Pressure Testers
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
MotoRad Cooling System Pressure Tester Adapters
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$44.99
—
$93.99
Dorman Rear Crankshaft Oil Seal Installers
Dorman rear crankshaft oil seal installers are convenient and valuable tools for use for when replacing the rear main seal cover on specified vehicle applications. These must-have tools ensure the cover is properly aligned on the crankshaft to prevent damage and leaks. The tools machined from low-carbon steel, zinc-plated and then are clear-chromate-coated for durability.
( 1 )
$72.99
Yukon Gear & Axle Carrier Bearing Pullers
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
Yukon Gear & Axle Setup Bearings
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
Yukon Gear & Axle Pinion Yoke Holders
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
ACT Clutch Alignment Tools
Install your ACT clutch kit easier and more accurately with the proper ACT clutch alignment tools. These alignment tools will make quick work of centering the clutch disc and keeping it stationary with the flywheel as you install the pressure plate over it. Make your clutch installation simple and precise using ACT clutch alignment tools.
( 47 )
$4.00
BOLT Padlocks
BOLT padlocks are the only padlocks that will open with your ignition key. Now, that's really a breakthrough: one-key technology! They feature a hardened zinc-nickel plated shackle, a solid zinc core, and an automotive-grade cylinder with a patented 6-plate tumbler sidebar to prevent picking and bumping. These padlocks have a rugged, weather-resistant jacket to protect your gear and achieve the ASTM's top corrosion resistance rating. Order the model recommended for your vehicle make.
( 20 )
$29.69
SPC Performance Camber Tools
Even out your tire tread wear with these SPC Performance camber tools. They are designed to easily adjust the camber on your vehicle. The tools are application-specific, so you can be sure that they will work on your vehicle. Make fast, easy, accurate camber changes with one of these SPC Performance camber tools.
( 3 )
$159.99
Yukon Gear & Axle Differential Carrier Shim Installation Drivers
Yukon Gear & Axle differential carrier shim installation drivers are amazingly self-explanatory. They help you install carrier shims on the differential carrier. The tools include five different size shims, so they can be used on a variety of Ford, GM, Mopar, or AMC differential carriers.
( 4 )
$200.99
