Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET SILVERADO 1500 Tools & Shop Equipment
Showing In Stock Items. Show All 46 Items.
Summit Racing™ LS Damper Pin Drill Fixtures
Summit Racing™ LS damper pin drill fixtures give you everything you need to drill and pin your harmonic damper on your non-keyed LS or LT engine. They're designed for OEM and similar aftermarket dampers when using belt driven superchargers. Kit includes a heat-treated drill fixture, 4 dowel pins (1/4 in. x 1 in.) and a 1/4 in. cobalt drill bit.
( 12 )
$73.99
Proform Harmonic Balancer Puller and Installer Tools
Proform harmonic balancer puller and installer tools are equipped with a roller thrust bearing for easy installation. They may also be used for steering wheel installation and removal. These heavy-duty professional tools have a maximum recommended torque of 150 lbs.-ft. The tools are available in universal and application-specific models.
( 72 )
$119.99
Nickky Bobby Exhaust Gasket O-Ring Cutting Tools
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
Yukon Gear & Axle Carrier Bearing Pullers
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
Mr. Gasket Rear Main Seal Installation Tools
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$77.55
Mr. Gasket LS Timing Cover Alignment Tools
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$58.15
—
$64.55
SuspensionMAXX Super T Torsion Bar Tools
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
Performance Tool Torsion Bar Unloading Tools
Safely unload torsion bar keys for replacement or adjustment with Performance Tool torsion bar unloading tools. These premium tools feature a larger C-frame opening to accommodate beefier torsion bars and are engineered to handle GM's K-3500 series trucks with heavy-duty chassis and larger torsion bars. The torsion bar unloading tools are manufactured from heavy-duty forged steel with larger 7/8 in. diameter threaded screws.
( 20 )
$41.99
MotoRad Cooling System Pressure Testers
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
SPC Performance Truck/SUV Ball Joint Presses
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
OTC Fuel Tank Lock Ring Wrenches
OTC fuel tank lock ring wrenches are a universal design that allows tools to fit fuel tank lock rings on a range of vehicles. Used with a drive ratchet or breaker bar, they easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
( 12 )
$92.99
MotoRad Cooling System Pressure Tester Adapters
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$45.99
—
$93.99
RideTech AirPod Covers
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$165.00
Dorman Rear Crankshaft Oil Seal Installers
Dorman rear crankshaft oil seal installers are convenient and valuable tools for use for when replacing the rear main seal cover on specified vehicle applications. These must-have tools ensure the cover is properly aligned on the crankshaft to prevent damage and leaks. The tools machined from low-carbon steel, zinc-plated and then are clear-chromate-coated for durability.
( 1 )
$72.99
McGard Spline Drive Lug Nut Sockets
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 25 )
$15.99
—
$22.99
On Sale
RAM Clutch Billet Steel Alignment Tools
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 55 )
$49.00
$44.10
OEM Automotive Tools Fuel Tank Lock Ring Tools
OEM Automotive Tools fuel tank lock ring tools are a universal design that allows them to fit fuel tank lock rings on the many vehicles listed in the applications. Used with a drive ratchet or breaker bar, they enable you to easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
Not Yet Reviewed
$34.99
BOLT Lock Cylinders
BOLT offers replacement lock cylinders for their toolbox latch retro-fit kits. They will match your factory ignition key when you select a cylinder model recommended for your vehicle/make. The lock cylinders feature an automotive-grade tumbler with a corrosion-resistant zinc core, plus a rugged, weather-resistant exterior. They're made with a stainless steel lock shutter to keep dirt out.
( 7 )
$16.99
—
$17.99
Lisle GM Caster Camber Kits
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$81.99
Centerforce Clutch Alignment Tools
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
OTC Injector Rail Assembly Removers
OTC injector rail assembly removers are used for removal of the direct injection fuel rail without damaging the unit. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly. OTC injector rail assembly removers include the remover, stud adapter, and L-hook and are specific to 2007-14 General Motors Direct Injection engines.
Not Yet Reviewed
$191.99
ACDelco Fuel Rail Schrader Valve Kits
ACDelco fuel rail Schrader valve kits include a valve to service fuel injection pressure-test ports located on your vehicle's fuel rail. These GM-recommended replacements provide the performance, durability, and service life you expect from General Motors. Select the fuel rail Schrader valve kit designed for your vehicle application and get back to a more enjoyable driving experience!
( 2 )
$4.99
Tuxedo Spin-Up Cradle Adapters
Tuxedo offers a variety of spin-up cradle adapters to match specific lift models. They provide an excellent format for lifting with the frame of the vehicle when using two-post lifts. These accessories help expand the capabilities of your machine so you can service a wider variety of vehicles. Get your vehicle lifts and components from a company known for their commercial-grade reliability and toughness when you order Tuxedo spin-up cradle adapters for your lift.
Not Yet Reviewed
$366.99
—
$393.99
Yukon Gear & Axle Setup Bearings
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
