CHEVROLET P30 Tools & Shop Equipment

Mr. Gasket Rear Main Seal Installation Tools

Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.

4.67 out of 5 stars ( 15 )

$77.55

Yukon Gear & Axle Carrier Bearing Pullers

Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!

4.4 out of 5 stars ( 5 )

$636.99

—

$769.99

Mr. Gasket LS Timing Cover Alignment Tools

Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.

5.0 out of 5 stars ( 16 )

$58.15

—

$64.55

MotoRad Cooling System Pressure Testers

Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.

5.0 out of 5 stars ( 2 )

$111.99

Nickky Bobby Exhaust Gasket O-Ring Cutting Tools

Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!

Not Yet Reviewed

$324.99

McLeod Clutch Alignment Tools

McLeod clutch alignment tools allow you to accomplish the tricky task of aligning your clutch disc between the pressure plate and flywheel before the pressure plate is bolted down. Save yourself time and frustration--use McLeod's clutch alignment tools to ensure that everything is properly lined up for a smooth, hassle-free installation.

4.5 out of 5 stars ( 10 )

$5.25

Yukon Gear & Axle Setup Bearings

Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!

3.0 out of 5 stars ( 3 )

$164.99

—

$182.99

Yukon Gear & Axle Pinion Yoke Holders

There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.

3.0 out of 5 stars ( 2 )

$174.99

OTC Detroit Diesel Injector Sockets

These 30mm OTC injector sockets ensure proper fit during nozzle removal and installation. OTC manufactures these sockets with a 3/8 in. square drive and the 7/8 in. hex permits easy access in tight areas.

5.0 out of 5 stars ( 2 )

$72.99

Yukon Gear & Axle Carrier Bearing Puller Components

Yukon Gear & Axle carrier bearing puller components are part of their top-quality differential tools designed to save you time and money. From retention sleeves and pins, to washers and adapters, these universal parts help to facilitate differential repairs.

Not Yet Reviewed

$52.99

Yukon Gear & Axle Differential Housing Spreader Tools

Yukon Gear & Axle differential housing spreader tools are built to work on the Dana 30, 44, 60, 61, 70, and 80 differentials. They are designed to allow you to safely and easily set carrier bearing preload, saving time and money. The tools are made from quality materials and feature full adjustability for simple installation and use.

Not Yet Reviewed

$756.99