Safety Equipment
Availability
When it comes to safety equipment, we’ve got you covered from head to toe! Get the protection you need with an SFI-approved helmet, fire-retardant driving suit, and...
When it comes to safety equipment, we’ve got you covered from head to toe! Get the protection you need with an SFI-approved helmet, fire-retardant driving suit, and accessories. Our wide selection of seat belts, harness kits, and window nets will keep you where you belong when the going gets rough. If the action gets too hot to handle, we’ve got fire extinguishers, and fire systems to douse the flames. We’ve also got driveshaft safety loops, parachutes, engine diapers, and transmission shields, all in stock and ready to ship.
When it comes to safety equipment, we’ve got you covered from head to toe! Get the protection you need with an SFI-approved helmet, fire-retardant driving suit, and accessories. Our wide selection of seat belts, harness kits, and window nets will keep you where you belong when the going gets rough. If the action gets too hot to handle, we’ve got fire extinguishers, and fire systems to douse the flames. We’ve also got driveshaft safety loops, parachutes, engine diapers, and transmission shields, all in stock and ready to ship.
Showing In Stock Items. Show All 90 Items.
RetroBelt complete seat belt systems outfit your classic with modern safety--front and rear. Meeting FMVSS standards, these RetroBelt systems equip your vehicle with complete four passenger kits that include a pair of retractable shoulder belts for the front seats, and a pair of retractable lap belts for the back seats. They offer an original equipment fit and finish, and bolt into the original factory location for easy installation. They feature classic chrome push-button buckles and chrome belt ends. Additional features include: * Meet or exceed Federal Motor Vehicle Safety Standards FMVSS 209 and FMVSS 302 * 102 in. of webbing on the retractor side of the front seat belts * 12 in. on the female receiver side * Include plastic sleeve for the buckle side of the seat belt * Inertia-style locking retractor locks in event of a sudden stop * Available with black or tan webbing
( 21 )
$432.99
Typical fire extinguishers are often heavy, bulky, and require two hands to operate. A 5 lb. bottle has about an 11 second discharge, usually leaves a mess behind, and requires service and maintenance. Element fire extinguishers are up to 80 percent smaller with almost five times the discharge time and are service-free. Every second counts when fighting a fire. Element fire extinguishers are easy to use, start fast, and last longer, providing you with more fire-fighting time. They are non-pressurized, potassium nitrate-based units that fight fire on a molecular level, making them safer to use, mess-free, non-toxic, non-corrosive, and environmentally friendly. Element fire extinguishers are available in two models, the E50 Professional and the E100 Industrial. Both include extinguisher with high visibility striker and cap and one mounting clip. The E50 is the most popular model, offering 50 seconds of fire-fighting protection, about four times longer than a 5 lb. bottle. It is recommended for professional use (automotive, powersports, garage, marine, etc.) and are internationally tested and certified. The E100 offers a 100-second discharge, more than eight times that of a 5 lb. bottle. They are recommended for industrial use in factories, fabrication, and welding, as well as for police, military, emergency personnel, and more. Additional features of both Element models: * Compact and easy to use * Large images on unit guide user through easy 4-step activation process * Zero pressure discharge--will not spread oil and liquid fires * Safe and maintenance-free--no moving parts or compressed gas to ever service and never expires * Weatherproof--unaffected by extreme temperatures, humidity, or vibration, will not freeze * Safe to store in wet environments * Element can safely be stored in hot climates * Fights all major fire classes: -- Wood, coal, and trash -- Flammable liquids and gases -- Electrical up to 100,000 V -- Cooking oil and grease
( 12 )
$89.95
—
$119.95
OER standard bucket seat lap belts are correct reproductions of the factory originals. These belts feature correct retractors and seat belt and buckle assemblies for front bucket seats. OER standard bucket seat lap belts are available for a choice of applications.
( 3 )
$169.99
Corbeau retractable 3-point harnesses are unique in two ways. The most exciting part of this belt is the retractable feature. Anyone who has driven with harness belts knows that once you are strapped in, there is little to no movement. In other words, it's not like your factory belt where it retracts as you move around in your car. With the 3-point, Double Release, retractable harness belts, an inertia reel is included on the end of the third strap that will allow the harness belt to function like your factory belts. In other words, the inertia reel allows you to move around but will lock under sudden movement or jolt. The second thing that makes this belt unique is the double release feature, which allows you to disconnect the rear strap with the simple push of a button. A typical 3-point harness belt has the two straps that go over the shoulders and through the harness slots. Those two straps then come together to form a single strap that mounts in the rear area of the vehicle. Depending on where you mount this rear strap, it can sometimes make it difficult for passengers to get in and out of the back seat. With Corbeau retractable 3-point harnesses you can disconnect the rear strap with a push of a button and then reengage the strap once your passengers are settled. As with all Corbeau harness belts, the lap belts bolt to your factory bolt hole locations. The plus to this is these factory bolt holes have been tested by the manufacture and are the safest way to install your harness belts. For added comfort, each harness belt is made with a pressure reducing waist pad. Corbeau retractable 3-point harnesses come with bolt-in mounting, which means the ends of the straps bolt into your mounting location.
( 17 )
$169.00
Get safe, comfortable, and great-looking seat belts for your GM muscle car without the installation hassles with Morris Classic Concepts retractable seat belts. They use the factory seat belt mounting locations, so there are no modifications necessary to install them. The complete bolt-in kits contain a pair of seat belts and instructions. The belts are available in a variety of colors and meet FMVSS codes.
( 39 )
$48.99
—
$423.99
Corbeau 4-point harnesses are an affordable way to upgrade your vehicle to harness belts. As with all Corbeau harness belts the lap belts bolt to your factory bolt hole locations. The plus to this is these factory bolt holes have been tested by the OEM and are the safest way to install your harness belts. With a 4-point harness belt, the two shoulder straps go over your shoulders and through the harness slots in your seats. After they go through the harness slots these straps then mount in the rear area of your vehicle. For added comfort, each harness belt is made with a pressure-reducing waist pad. Corbeau 4-point harnesses come with either bolt-in or snap-in mounting. With bolt-in mounting, the ends of the straps bolt to your mounting locations. With snap-in mounting, eye bolts are included that bolt to your mounting locations. The ends of your harness straps then snap to those eye bolts. Notes: * Available in a variety of colors. * These belts are intended for off-highway use. * In many cases Corbeau belts meet or exceed Federal Motor Vehicle Safety Standards (FMVSS), but they are not FMVSS-approved. You purchase and use them at your own risk.
( 9 )
$129.00
Corbeau 3-point harnesses are an affordable way to upgrade your vehicle to harness belts. As with all Corbeau harness belts, the lap belts bolt to your factory bolt hole locations. The plus to this is these factory bolt holes have been tested by the OEM and are the safest way to install your harness belts. With a 3-point harness belt, the two shoulder straps go over your shoulders and through the harness slots in your seats. After they go through the harness slots, these straps come together to form a "Y" and you then mount the one remaining strap in the rear area of your vehicle. For added comfort, each harness belt is made with a pressure reducing-waist pad. Corbeau 3-point harnesses come with either bolt-in or snap-in mounting. With bolt-in mounting, the ends of the straps bolt to your mounting locations. With snap-in mounting, eye bolts are included that bolt to your mounting locations. The ends of your harness straps then snap to those eye bolts. Notes: * Available in a variety of colors. * These belts are intended for off-highway use. * In many cases Corbeau belts meet or exceed Federal Motor Vehicle Safety Standards (FMVSS), but they are not FMVSS-approved. You purchase and use them at your own risk.
( 6 )
$119.00
On Sale
Simpson Devil Ray helmets feature a true carbon fiber shell, making them exceptionally lightweight and safe. The chin bar design extends downward by 19mm and ventilation ducts in the chin area provide exceptional airflow and circulation. Features include: * HANS device compatible, predrilled for clips * Black fire-retardant liner * Lock-tight shield eliminates debris * Padded helmet bag * Side pipe and top air options available * Factory installed radio communication available
Not Yet Reviewed
$674.95
$606.95
Corbeau 3-point retractable seat belts are perfect for those who want to replace their worn-out OEM factory belt, while maintaining the factory look and feel. Over time, belts can become damaged or worn due to excessive wear or sun exposure. Corbeau retractable seat belts are easy to install, and with the different mounting and adjusting options, they will fit in almost any vehicle. These seat belts include the lap belt and a single, over-the-shoulder strap, which will retract similarly to your factory belts. Corbeau seat belts offer the finest quality with a big emphasis on functionality.
( 6 )
$115.00
On Sale
Summit Racing™ Racing Harness bars provide a stable and secure means to attach a multi point safety harness system to your vehicle. Constructed from steel for strength and stability, these adjustable harness bars are available in several powdercoat finish colors, as well as fitment options. Order the harness bar designed to meet your application needs. Note; Designed for aftermarket 4-6 point racing harnesses used on a track. Not intended to replace factory shoulder belts when driving on the street.
( 3 )
$203.99
$169.99
—
$305.99
On Sale
For use in NASCAR, Bell Racing RS7 Ultra Lite helmets were developed through a collaboration with Penske Racing to reduce weight and enhance airflow. They combine an aerospace-grade carbon shell, a reinforced energy absorbing liner system, and the performance features of the HP7 to create the most advanced, lightweight, Snell-rated helmets to be used in some of North America's most demanding forms of racing. The RS7 Ultra Lites come equipped with a Double Screen Anti-Fog (DSAF) visor and Bell Racing SmartLock mechanism for optimal visibility and security. Features: * Aerospace-grade lightweight carbon shell * Advanced multi-density, multi-piece liner -- Maximize energy absorption and impact performance -- High-comfort fire-retardant fabric * Multi-purpose fit system that can be used with or without ear cups (ear cups included) * Optical grade injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility * Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation * Interior ventilation channels enhanced to maximize airflow * Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities * Integrated channels in face piece offer multiple options to install drink tube and radio systems * Synthetic rubber gasket seal to prevent dirt and water from entering the helmet * Factory installed Hans anchors as original equipment * Equipped with Bell Racing SmartLock mechanism * Sizes 2X-Small to X-Large
Not Yet Reviewed
$2,199.95
$1,979.96
For vehicles with a factory or aftermarket roll bar, Element offers a secure way to mount your E50 fire extinguisher (not included). Made from laser-cut and CNC-bent metal with a universal design to fit most roll cage tube sizes, then powdercoated in high-visibility red, these roll bar mounts are held in place with the included band clamps and Velcro® security strap. They are perfect for race cars, off-road vehicles, ATVs, or any vehicle with a roll bar.
( 3 )
$59.00
Summit Racing™ seat belt anchor plates are stamped reinforcements that weld on the backside of the floor pan, giving you a safe solid anchor point for additional seat belts or when fabricating or repairing a floor pan. Made from 11-gauge steel, they weld on the opposite side of the panel and keep the mount from tearing through the sheet metal should you have an accident. Patterned after a factory plate, our Summit Racing™ seat belt anchor plates look great in restorations as well. Plates are offered individually or in a kit with two plates, bolts, and washers.
( 2 )
$8.99
—
$14.99
Zamp Racing is proud to offer their revolutionary RZ-70E Switch helmets! The helmets have a composite Aramid mix lightweight shell and also feature a unique cap system that allows you to easily configure it for a variety of racer setups by removing a cheek pad and three screws. The choice of different triangular caps makes adding communication or hydration to your Zamp helmet easy! The helmets new dual-density air integration relief system provides full 360-degree air channeling for ultimate airflow—cool air enters the helmet; warm air leaves the helmet. These Zamp helmets are available in a range of sizes, in solid colors or with cool graphic designs. Order the helmet in size and color you'd prefer. Product features include: * Composite Aramid mix lightweight shell * Certified as full face, but has open face feel * Z-design of air system in shell circulates air throughout (360 degrees) utilizing large internal channels—cool air enters the helmet, warm air leaves the helmet * Channels in chin bar EPS (expanded polystyrene crushable foam) allow for easy mounting of communications/microphone or drink tube * ZF-20 Peak visor included * M6 inserts for head-and-neck restraint * Triangular caps fit left or right; easy to reconfigure * Factory installation available for communications and hydration kits * FIA 8859-2015/Snell SA-2020 approved
( 9 )
$514.99
—
$539.99
Buckle up in style! SafeTBoy's 3-point retractable bench seat belt kits feature heavy-duty, OEM-style fabric, and their CAD design ensures your safety every time you buckle up. These universal seat belt kits are designed to replace your outdated, worn out, or damaged seat belts with high-quality aftermarket units created using today's modern technology. SafeTBoy 3-point retractable bench seat belt kits ensure a long life of smooth and safe operation with each belt providing a unique, easy release design to ensure flawless operation. They are ideal for all types of vehicles, available in several colors and configurations to best suite your needs, meet Federal Motor Vehicle Safety Standards, and are backed by a Limited Lifetime Warranty. When safety matters, count on SafeTBoy products to deliver the security and protection you need. Please note: These are not direct factory replacements and may require adapter brackets or other parts to complete the installation.
( 3 )
$99.95
—
$324.50
BMR offers rock-solid mounts for any parachute used to slow your car at the end of the race. These bolt-on units enable you to stop quicker and keep the stock appearance of your drag racer—or high-powered street car that sees the track often! They simply replace the factory rear bumper bar with a tubular version that doubles as a parachute mount and is easily removed when not in use. BMR parachute mounts include necessary hardware and are available in different colors and finishes.
( 3 )
$229.95
—
$309.95
Corbeau lap belts are your off-highway replacements for factory belts or alternatives for harness or over-the-shoulder belts. While it's always recommended that you use a belt that gives upper body support to complement the lap belt, that's not practical in all vehicles. Corbeau lap belts are very popular for rear seats or in classic cars.
Not Yet Reviewed
$75.00
On Sale
Simpson Airspeed racing suits are purpose-built multi-function lightweight premium 2-layer driving suits. They're built with X-Tech stretch side, back, thigh, and knee panels for ventilation and flexibility. SFI 3.2A/5 certified, the satin twill Nomex fabric is available in multiple trim colors. Airspeed suits feature straight leg cuffs, inset pockets, and flexible chest, leg and arm graphics. The outer layer has just the right amount of sheen combined with a soft knit inner layer, resulting in a clean and comfortable factory look. Select the size and color scheme you prefer.
Not Yet Reviewed
$1,249.95
$604.95
—
$1,249.95
Fathouse Performance offers harness and submarine mounts to keep you securely in your seat. Providing 100 percent bolt-in installation to work in conjunction with Fathouse Kirkey and fixed-back seat mounts, both styles give you a clean and easy way to install a submarine belt or lap harness for additional safety. Both feature thick steel construction with a durable powdercoat finish for a factory appearance. Select the mount(s) needed for your vehicle.
Not Yet Reviewed
$74.99
—
$119.99
On Sale
Bell Racing Mag-10 Rally Sport helmets are conventional open face helmets in a sleek design that provides great performance and value. Featuring a carbon-glass composite shell, an adjustable peak combined with an adjustable and integrated sunscreen, outstanding sound-insulation and ZeroNoise electronics, high-power speakers and noise cancelling microphone, Mag-10 Rally Sports are perfect helmets for rally drivers and co-drivers looking for a more traditional open face design. They are Snell SA2025 and FIA8859-2024 rated. Select your best fit. Features: * Composite shell * Advanced multi-density, multi-piece liner -- Maximize energy absorption and impact performance -- High-comfort fire-retardant fabric * Integrated anti-scratch dark smoked sunscreen * Removable cheek pads with multi-density materials for improved comfort * Flexible yet sound insulating integrated ear muffs for comfort combined with sound insulation * Factory installed Hans anchors as original equipment * ZeroNoise electronics, high-power speakers, and efficient noise cancelling microphone mounted on high-quality flex boom * Extendable cable coming out of the helmet, ending by ultra-reliable heavy-duty molded in female Nexus connector compatible with other brands of amplifiers * Sizes X-Small to X-Large
Not Yet Reviewed
$699.95
$629.96
On Sale
Hooker Blackheart transmission crossmember hoops are part of the most comprehensive line of Gen III Hemi swap components available for the Mopar B-body. They allow the installation of the popular NAG1 5-speed or 8HP70 8-speed automatic transmission when used with the correct adapter plate. Hooker hoops replace the very narrow factory hoops on the original upper transmission crossmember allowing clearance for driveshaft coupler and speed sensor tone rings. When used in combination with the Hooker Blackheart transmission crossmember, they provide a bolt-in clearance solution with OEM strength and durability with no need for any fabrication or welding. Features include: * 1/2 in. steel upper hoop provides the necessary structural integrity when used with Hooker Blackheart transmission crossmember * No cutting of the transmission tunnel required * Uses the OEM mounting holes * Heavy-duty steel construction for strength and durability * Includes mounting bolts
Not Yet Reviewed
$225.95
—
$232.95
$124.95
—
$151.95
Takata DRIFT III Series seat belts are uniquely designed for easy installation in passenger cars with factory seats. They incorporate ASM (Anti-Submarine Technology) for added safety and are available with bolt-in or snap-in brackets. The bolt-in bendable stainless steel hardware allows installation to factory seat belt mounting points without affecting the operation of factory seat belts—while the snap-in style is easy to remove when not in use. Takata DRIFT III seat belts use 3 in. shoulder and 2 in. lap belts that set a new standard for style and safety of aftermarket street-legal belts. Choose from black and green nylon to coordinate with your interior.
Not Yet Reviewed
$490.00
There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.
Not Yet Reviewed
$520.19
—
$954.89
On Sale
Bell Racing Mag Rally Sport helmets are entry-level open-face helmets with a contemporary design. Built upon Bell's proven legacy of "Serious Head Protection", these helmets are enhanced with the remarkable ZeroNoise communication system. They feature a fiberglass shell, an adjustable peak fitted with anti-glare sunscreen, factory installed Hans anchors as original equipment. Experience the perfect balance of high-quality safety and powerful communication at an incredibly affordable price. Select your ideal size. Features: * Fire-retardant fabric * ZeroNoise electronics, high-power speakers, and efficient noise cancelling microphone mounted on high-quality flex boom * Extendable curly cable coming out of the helmet, ending by ultra-reliable heavy-duty molded in female Nexus connector compatible with other brands of amplifiers * Sizes Small to 4X-Large
Not Yet Reviewed
$499.95
$449.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
