Availability
Showing In Stock Items. Show All 30 Items.
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 142 )
$334.95
—
$874.95
Stifflers driveshaft safety loops are engineered to exceed NHRA regulations. These one-of-a-kind driveshaft safety loops will save you and your investment from the destructive effects of a broken driveshaft. Quick and easy bolt-in application requires no drilling or welding for a no-hassle installation. Stifflers driveshaft safety loops will work with most automatic and manual transmissions, so you can launch hard with confidence! Stifflers driveshaft safety loops feature: * Lightweight, but strong design * Works with aluminum driveshafts and most aftermarket exhausts * Powdercoated for long life * Complete with all hardware * Includes spacer plates to maintain correct driveshaft angle (where applicable)
( 10 )
$149.95
Fathouse Performance offers harness and submarine mounts to keep you securely in your seat. Providing 100 percent bolt-in installation to work in conjunction with Fathouse Kirkey and fixed-back seat mounts, both styles give you a clean and easy way to install a submarine belt or lap harness for additional safety. Both feature thick steel construction with a durable powdercoat finish for a factory appearance. Select the mount(s) needed for your vehicle.
Not Yet Reviewed
$74.99
—
$119.99
In the event of U-joint failure, Competition Engineering universal driveshaft loops will contain your driveshaft. Made of mandrel-formed 1.25 in. O.D. x .083 in. wall mild steel tubing, these kits offer a lightweight, weld-in alternative to bolt-on types. The driveshaft loop portion is a bolt-on design, for easy removal of the driveshaft.
( 24 )
$194.99
Are you running a 12.99 or better in the quarter-mile? If so, then you need BMR Suspension driveshaft safety loops. U-joint failure can have serious consequences, and these safety loops will keep your driveshaft from flying off or dragging. Most styles may be bolted or welded into place and do not require drilling. BMR's steel driveshaft safety loops meet the requirements set by the NHRA—and provide peace of mind so you can focus on the race. Choose the style and finish for your application.
( 44 )
$109.95
—
$149.95
When seconds count in the event of a fire, make sure that you have quick and easy access to your on-board fire extinguisher. The special design of these Rugged Ridge fire extinguisher holders incorporates thick, nylon web adjustable straps with a hook and loop fastening system to secure your fire extinguisher to the roll bar until needed.
( 18 )
$35.99
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$999.95
Trackspec Trackday Series bolt-in roll bars are available for a wide range of cars, such as Corvettes, Camaros, and Firebirds. Over the past few years, Trackspec has become the leader in roll cage installations and design. As part of the SPEC Corvette racing series, they were driven to develop the best solutions on the market for rollover safety, starting with their DIY Roll Cage kits. For those not looking for a full roll cage, Trackspec developed the best bolt-in 4-point roll bar on the market for the 1982-92 3rd generation Camaro. Many roll bars on the market mount to the floor, which can be a less-than-ideal mounting solution. The Trackspec solution resolves all of this by mounting the main hoop to a vertically supported shelf near the rear seat buckets. They accomplished this by using advanced technologies to develop a billet machine aluminum plate that distributes the load of the main hoop evenly and across a larger surface area. By doing so, Trackspec achieved a stronger mounting solution and ease of installation. The rear down tubes also mount to a supported portion of the unibody structure. Further, the vertical portion of the rear wheel tubs is tied in to increase mounting strength. Order the roll bars recommended for your vehicle. Additional product details: * Industry-leading main hoop mounting solution using oversized billet machined plates to distribute loads on a vertically supported part of the unibody * Rear kicker bars attach to supported portion of the unibody for a strong and secure mount * Rear bars are detachable using TIG-welded couplers for ease of installation and shipping * Driver and passenger seats maintains full articulation * Meets and exceeds NASA and SCCA time trial 4-point bolt-in requirements * Installs easily with simple hand tools in 2-3 hours * Comes fully powdercoated in standard colors * Retains all plastics and rear seat bottoms * Upper rear seat must be removed * Can be unbolted in minutes if needed * All bars are tucked as high and as tight as possible * Made of 1.75 in. .095 in. mild steel DOM * Includes all mounting hardware
( 1 )
$2,049.99
Ensure your car meets the NHRA safety standards with Fathouse Performance weld-in roll cage kits. Designed and engineered from Docol R8—an advanced, high-strength tubing steel—FP kits are built to satisfy 8.50 ET specs, while providing the best fit possible. They ship pre-bent/notched ready to prep for welding and installation. Contents: * 1/8 in. steel floor plates * 1 5/8 in. Docol tubing * 1 1/4 in. Docol D bars * Steering column mounts Note: Step-by-step instructions are NOT provided with this kit. Fathouse Performance highly recommends professional installation.
Not Yet Reviewed
$1,999.99
Allstar Performance offers main hoop assemblies for your standard or deluxe roll cage kits. Solidly built and reasonably priced, these high-quality steel assemblies are your foundation to protection. Allstar knows that your roll cage is serious equipment. When you need to replace it, make the right choice with Allstar main hoop assemblies.
( 4 )
$83.99
On Sale
DragonFire Racing lockdown harness bars are designed to work with DragonFire harnesses to provide the safety you need when UTV riding gets rough. These seat belt bars are constructed using a combination of a laser-cut steel plate, 6-bolt cage clamps, and a tube—creating the perfect bar you can bolt on and securely mount your harness to. They also feature built-in shoulder strap retainers that don't require the use of a special seat. The steel lockdown bars are available in several powdercoat finish colors, as well as for fitment on a variety of models from makers like Can-Am, Arctic Cat, Polaris, and Kawasaki.
( 4 )
$168.99
—
$220.99
$152.09
—
$209.94
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 5 )
$574.95
—
$999.95
Rugged Ridge Elite fire extinguisher holders keep your fire extinguishers ready to use in a moment's notice. Setting the standard for both form and function, Elite holders are made from billet-style cast aluminum, finished in a durable textured black powdercoat—and equipped with a stainless steel spring-loaded release mechanism for easy one-hand access. Rugged Ridge Elite fire extinguisher holders are designed to work with most 2.5 lb. round extinguishers, and can be mounted directly to a roll bar tube or to any flat surface with the included hardware.
Not Yet Reviewed
$84.99
On Sale
If you're running full drag slicks, then you need Steeda's new driveshaft safety loops. These NHRA-compliant safety devices keep the driveshaft from digging into the ground and reduce the chance of cockpit entry in the event of driveshaft breakage. The rear support of their twin-rail design makes them very strong and they will install onto existing hardware--there's no need to drill holes in the floorpan or remove your interior. These Steeda driveshaft safety loops will clear a 4.00 in. driveshaft and work with both 1 and 2-piece driveshafts. Best of all, the 2-piece loops mean that you don't have to drop your driveshaft to install it.
Not Yet Reviewed
$294.95
$235.96
Clearance
Warrior Products offers tube door padding kits for a variety of applications, including many Jeep Wrangler, Gladiator, and Cherokee models from 1984 and up. These covers are designed to add comfort and a stylish look to Warrior's Adventure tube doors. They feature a zippered pocket for storage and are available in various colors to match or complement a vehicle. The kits are easy to install, providing functionality and aesthetic appeal to vehicles that have replaced their factory doors with tube doors. Padding provides a more comfortable armrest for the driver and passengers, front or rear. Sold in pairs.
Not Yet Reviewed
$205.99
$112.50
Recommended for all vehicles, Competition Engineering's bolt-on driveshaft safety loops will contain the driveshaft in case of front U-joint failure, keeping it from contacting the track and possibly flipping the vehicle. They're made from 2 in. wide, 1/4 in. thick, CNC-formed steel with durable clear zinc plating. They bolt to the floor pan with four bolts per side and are stronger than brands using only two bolts per side.
( 3 )
$191.99
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$454.99
—
$829.99
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$294.95
—
$414.95
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 12-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 12-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 12-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two front downstruts, and two forward struts * 12-Point Roll Bar Strut Kit, which includes two rear struts, two door struts, a rear X-brace, two diagonal hoop supports, 12 weld joint gussets, and 10 steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 4 )
$1,462.99
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$1,259.99
Allstar Performance offset deluxe roll cage kits are ideal for use with template-style or ABC bodies. They can, of course, be purchased complete—or via individual components, such as main hoop assemblies, curved door bars, and door bar spacers. This component box kit is a perfect fit with either Allstar's 54 in. or 57 in. wide offset kit frames.
( 1 )
$231.99
Hold on to your driveshaft with Moroso driveshaft loops. Manufactured from heavy-gauge fabricated steel, these loops are given a durable, black glossy powdercoated finish and all hardware is included. They feature an easy-to-install, bolt-on design needing no modifications, a removable loop for easier driveshaft removal, and they meet the requirements of all racing sanctioning bodies. They're available for standard and automatic applications. Contain your driveshaft in the event of a front U-joint failure with strong Moroso driveshaft loops.
Not Yet Reviewed
$200.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
