Availability
Showing In Stock Items. Show All 55 Items.
Stifflers driveshaft safety loops are engineered to exceed NHRA regulations. These one-of-a-kind driveshaft safety loops will save you and your investment from the destructive effects of a broken driveshaft. Quick and easy bolt-in application requires no drilling or welding for a no-hassle installation. Stifflers driveshaft safety loops will work with most automatic and manual transmissions, so you can launch hard with confidence! Stifflers driveshaft safety loops feature: * Lightweight, but strong design * Works with aluminum driveshafts and most aftermarket exhausts * Powdercoated for long life * Complete with all hardware * Includes spacer plates to maintain correct driveshaft angle (where applicable)
( 10 )
$149.95
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
—
$437.99
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$339.99
—
$756.99
Ensure that you and your passengers are safe by adding or replacing a seat belt in your vehicle, provided by Crown Automotive. They come available in 2 and 3-point retractable, and non-retractable models. These seat belts are made from high-quality materials to withstand the test of time and to maximize the safety of loved ones.
( 11 )
$27.99
—
$96.99
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 143 )
$334.95
—
$874.95
Available for many makes and models, Alston Racing 4-point roll bars are computer bent using 1 5/8 in. mild steel or 4130 chromoly. Alston Racing 4-point roll bars are built specifically for each vehicle and come complete with floor plates and instructions. Please note: cutting, notching, and welding are required to complete the installation.
( 13 )
$249.00
Make your race car track-safe with Allstar standard roll cage kits. They include all of the bars--1 3/4 in. diameter mild steel tubing and .095 in. wall--to form a protective cocoon. Roll cage kits have driver doors with four curved bars, and a "Z" type right side door and gussets are included. Fast lap times are great, but a safe car, hopefully, lets you walk away to race another day. Reinforce your racer with Allstar standard roll cage kits.
( 17 )
$114.99
—
$419.99
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$524.98
Trail-Gear Rock Defense roll cages will upgrade your Jeep by adding superior performance, safety, and durability. These components are made of heavy-duty mild steel that's designed to offer more protection in the event of a roll during your off-road or even on-road adventures. Trail-Gear Rock Defense roll cages are an excellent addition to any off-road enthusiast. Order the kit recommended for fitment on your vehicle.
( 5 )
$499.99
Summit Racing™ driveshaft safety loops do one thing—they retain your driveshaft if a universal joint or other drivetrain component decides to break. These bolt-on safety loops are made of heavy-gauge steel, available in fully adjustable or fixed designs, depending on the application. Summit Racing™ driveshaft safety loops also meet NHRA requirements. Choose the model designed for fitment on your particular vehicle.
( 150 )
$42.99
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$95.99
—
$288.99
Do you have missing or malfunctioning seat belts? OMIX-ADA replacement seat belts are available for a range of applications. They provide your vehicle with a functional and cost-effective safety belt. Order the OMIX-ADA replacement seat belts designed to fit your application.
( 20 )
$39.99
—
$91.99
Allstar Performance offers main hoop assemblies for your standard or deluxe roll cage kits. Solidly built and reasonably priced, these high-quality steel assemblies are your foundation to protection. Allstar knows that your roll cage is serious equipment. When you need to replace it, make the right choice with Allstar main hoop assemblies.
( 4 )
$83.99
—
$225.99
There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.
Not Yet Reviewed
$520.19
—
$954.89
SafeTBoy 3-point retractable push button buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, push button-style buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 79 )
$195.50
—
$399.50
Allstar Performance offset deluxe roll cage kits are ideal for use with template-style or ABC bodies. They can, of course, be purchased complete—or via individual components, such as main hoop assemblies, curved door bars, and door bar spacers. This component box kit is a perfect fit with either Allstar's 54 in. or 57 in. wide offset kit frames.
( 1 )
$199.99
Are you running a 12.99 or better in the quarter-mile? If so, then you need BMR Suspension driveshaft safety loops. U-joint failure can have serious consequences, and these safety loops will keep your driveshaft from flying off or dragging. Most styles may be bolted or welded into place and do not require drilling. BMR's steel driveshaft safety loops meet the requirements set by the NHRA—and provide peace of mind so you can focus on the race. Choose the style and finish for your application.
( 44 )
$44.95
—
$159.95
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$407.98
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 5 )
$574.95
—
$999.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$999.95
On Sale
Driver and spectator safety is imperative at the track, and QuickTime has the quality parts that you need to protect yourself and others. QuickTime safety shields are designed to offer excellent protection in the event of a flexplate explosion. QuickTime flexplate shields are made from durable powdercoated steel and require no transmission trimming for use. These shields meet nearly every sanctioning body's rules and are SFI 30.1 certified.
( 8 )
$126.95
$84.91
—
$185.95
UMI Performance driveshaft safety loops are NHRA-legal and will bolt-in with minimal modifications. They're a must for tracks requiring safety loops on cars running faster than 13.99 in the quarter-mile. Constructed entirely from 0.250 in. thick mild steel, the loops have CNC-machined mounting points for a superb fit, and are fully MIG-welded for outstanding strength. They are available in different styles, covering hundreds of applications from 1964 and up.
( 42 )
$169.99
RT Off-Road seat belt extension brackets add height to seat belts for models with center consoles. Receptacle extension brackets and angle brackets are offered for Jeeps with shoulder straps and BELT3B (front 3-point retractable) seat belts.
( 2 )
$14.99
SafeTBoy 3-point retractable airplane buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, aviation-style flip buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 13 )
$195.50
—
$399.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
