Availability
Showing In Stock Items. Show All 13 Items.
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$437.99
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$829.99
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$282.99
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$675.99
Ensure your car meets the NHRA safety standards with Fathouse Performance weld-in roll cage kits. Designed and engineered from Docol R8—an advanced, high-strength tubing steel—FP kits are built to satisfy 8.50 ET specs, while providing the best fit possible. They ship pre-bent/notched ready to prep for welding and installation. Contents: * 1/8 in. steel floor plates * 1 5/8 in. Docol tubing * 1 1/4 in. Docol D bars * Steering column mounts Note: Step-by-step instructions are NOT provided with this kit. Fathouse Performance highly recommends professional installation.
Not Yet Reviewed
$1,999.99
On Sale
There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.
Not Yet Reviewed
$520.19
—
$954.89
$442.16
—
$811.66
Trackspec Trackday Series bolt-in roll bars are available for a wide range of cars, such as Corvettes, Camaros, and Firebirds. Over the past few years, Trackspec has become the leader in roll cage installations and design. As part of the SPEC Corvette racing series, they were driven to develop the best solutions on the market for rollover safety, starting with their DIY Roll Cage kits. For those not looking for a full roll cage, Trackspec developed the best bolt-in 4-point roll bar on the market for the 1982-92 3rd generation Camaro. Many roll bars on the market mount to the floor, which can be a less-than-ideal mounting solution. The Trackspec solution resolves all of this by mounting the main hoop to a vertically supported shelf near the rear seat buckets. They accomplished this by using advanced technologies to develop a billet machine aluminum plate that distributes the load of the main hoop evenly and across a larger surface area. By doing so, Trackspec achieved a stronger mounting solution and ease of installation. The rear down tubes also mount to a supported portion of the unibody structure. Further, the vertical portion of the rear wheel tubs is tied in to increase mounting strength. Order the roll bars recommended for your vehicle. Additional product details: * Industry-leading main hoop mounting solution using oversized billet machined plates to distribute loads on a vertically supported part of the unibody * Rear kicker bars attach to supported portion of the unibody for a strong and secure mount * Rear bars are detachable using TIG-welded couplers for ease of installation and shipping * Driver and passenger seats maintains full articulation * Meets and exceeds NASA and SCCA time trial 4-point bolt-in requirements * Installs easily with simple hand tools in 2-3 hours * Comes fully powdercoated in standard colors * Retains all plastics and rear seat bottoms * Upper rear seat must be removed * Can be unbolted in minutes if needed * All bars are tucked as high and as tight as possible * Made of 1.75 in. .095 in. mild steel DOM * Includes all mounting hardware
( 1 )
$2,049.99
—
$2,199.99
BMR harness bars allow safe and secure attachment of seat harnesses. They feature steel construction and a durable powdercoat finish in red or black Hammertone. Designed to use a 4-point harness that wraps the main bar for the shoulder straps, the bars have bolt-in tabs on the lap belt portion and can also be used with a BMR crotch strap mount for a 5-point harness. BMR harness bars quickly and easily connect and disconnect with the full interior, front and rear seats, fully installed simply by removing all four bolts, allowing use of the back seat, full access to the interior, or in order to be removed for street driving (ONLY when retaining the factory 3-point seat belts).
( 1 )
$639.95
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 141 )
$584.95
Fathouse Performance Fab 4-point bolt-in roll bars are designed to provide superior safety and structural integrity for your vehicle. Built in-house, the roll bars are crafted from high-caliber materials, manufactured with precision TIG-welded DOCOL tubing. DOCOL is the highest grade SFI approved material for roll bars and roll cages available, and it is standard in the Fathouse Performance Fab 4-point roll bars. Engineered for straightforward installation, no drilling, cutting, or modifications required, these roll bars bolt into existing holes in the factory corner gusset area with heavy-duty thick steel plates. For enhanced protection during spirited driving or track events, you need Fathouse Fab 4-point roll bars. Available in your choice of a raw finish for a robust and sleek look, or in black or red powdercoated finishes (specify finish when ordering). Product features and details: * Quality built with DOCOL R8 tubing * Precision TIG-welded * Extra clearance seat back bar (works with all OEM Mustang seats) * Threaded harness bungs in seat back bar * Removable rear bars for easy installation * Full seat travel and extra lean back room * Mounting hardware included *Available in your choice of a raw finish for a robust and sleek look, or black or red powdercoated finishes (please specify finish when ordering)
Not Yet Reviewed
$1,499.99
On Sale
Summit Racing™ Racing Harness bars provide a stable and secure means to attach a multi point safety harness system to your vehicle. Constructed from steel for strength and stability, these adjustable harness bars are available in several powdercoat finish colors, as well as fitment options. Order the harness bar designed to meet your application needs. Note; Designed for aftermarket 4-6 point racing harnesses used on a track. Not intended to replace factory shoulder belts when driving on the street.
( 3 )
$203.99
$169.99
—
$205.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
