Filters
Summit Racing™ offers safety harness eye bolts to help ease the installation of your safety belt. These eyebolt, nut, and washer kits are made of premium quality steel, with a zinc plated finish and are available in different diameters and lengths to fit your application. When it comes to quality hardware for mounting your seat belts, Summit Racing™ has the racing harness components you need.
( 26 )
$4.99
Kirkey roll bar padding features offset holes, providing more padding where it's needed on the driver side. It comes in a variety of colors for a custom installation, and is flame-retardant for added safety.
( 64 )
$7.00
On Sale
Never take a chance when it comes to safety! RaceQuip offers four different hardware pieces to suit your specific application needs and to help ease belt installation. All harness hardware is constructed from premium-quality steel and plated to resist corrosion.
( 21 )
$11.74
$6.10
—
$10.95
Schroth Racing reinforcement plates will help with your next racing harness installation. Reinforcing a harness mounting point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. These steel reinforcement plates are available in three different thread pitch/sizes to accommodate your specific harness application for the proper mounting and installation.
( 3 )
$5.00
G-FORCE offers quality hardware for mounting your seat belts, and these eye bolts are no exception. They include the eyebolt, nut, and washer.
( 28 )
$9.00
Allstar Performance roll bar padding features an offset inside diameter that allows for easy installation. It also places a thicker amount of padding toward the driver for greater safety. This padding is constructed from closed cell foam that doesn't absorb moisture, but progressively absorbs shock. Allstar roll bar padding is offered in a wide variety of colors in easy-to-handle lengths.
( 20 )
$5.99
Allstar Performance seat belt anchors are designed to reinforce stock type floor pans when mounting seat belts. You won't have to worry about tear-through in case of an accident when you use these sturdy anchor plates to install aftermarket seat belts to your sheet metal floor.
( 3 )
$6.99
Summit Racing™ seat belt anchor bolts are designed to meet or exceed your automobile manufacturer's standards for quality. These bolts are engineered for maximum protection. Cut from steel with a yellow zinc or chrome finish, the anchors are available for front and/or rear inner and outer seat belt positions. They're offered for a wide range of vehicles—including many Chevrolet, GMC, Pontiac, Oldsmobile, and Cadillac cars, trucks, and vans from the 1960s and '70s. Replace those often missing or damaged seat belt bolts with our new reproductions.
( 2 )
$6.99
Mr. Gasket parachute flags are designed to mount on your parachute after it's been re-packed. They feature a bright red color and the phrase, "Remove Before Flight"—that's right, the same phrase they use on Air Force jets on the decks of aircraft carriers around the world. Mr. Gasket parachute warning flags let your crew know the chute is safely packed and ready to deploy during your next pass down the quarter-mile.
( 17 )
$9.99
OER seat belt anchor bolts are designed to meet or exceed your automobile manufacturer's standards for quality. These bolts are engineered for maximum protection.
( 16 )
$8.99
Quality foam non-SFI roll bar padding from QuickCar easily attaches to your roll bar to provide added protection. Their special closed-cell foam does not absorb moisture, but progressively absorbs shock (it gets more dense as it is compressed). Their offset inside diameter provides for an easy installation, with thicker padding toward the driver. It comes in several popular colors to properly equip your race car.
( 18 )
$6.49
RetroBelt mounting kits make installing your 2- and 3-point seat belts easy, with specific hardware components furnished for each harness style. The kits contain Grade 5 fasteners and all necessary washers and nuts.
( 6 )
$6.99
OER 1977-81 shoulder harness retainers are high-quality reproduction seat belt guides designed for use on various GM models with bucket seats. These triangle shape guides attach to the upper outer side of the bucket seat to allow the seat belt webbing to be secured without twisting. OER seat belt guides are manufactured in injection molded ABS with the correct dimensions and grain to match the originals.
( 7 )
$10.99
Lifeline Fire offers an extensive range of spare parts and accessories for your Lifeline fire system, including nozzle mounting tabs. These handy, bendable aluminum alloy tabs are designed to eliminate the labor and hassle involved in fabricating your own tab mounts. Three holes at the base allow for either M6 screw or 1/8 in. rivet mounting. When installing any fire system, proper nozzle mounting is critical for maximum system performance. An improperly installed nozzle that deflects when the system fires will not place the suppressant where intended, can potentially render an expensive, lifesaving investment useless. Don't allow a cheap imitation component to impair the performance of your Lifeline Fire system—insist on Lifeline genuine parts.
( 1 )
$2.99
G-FORCE seat belt mounting backup plates are constructed of sturdy steel with a pre-drilled hole. They're required by the SCCA when mounting belts directly to the body of your race car.
( 3 )
$9.00
From bolt-in brackets and bar slides, to reinforcement plates, bolts, and tabs, Schroth Racing offers quality replacement harness components specifically designed for use with their competition restraints. Schroth is the industry's leading safety equipment supplier to professional, amateur, and beginning drivers. Begin every race with a secure harness system.
( 3 )
$1.99
—
$8.00
Zamp Sports offers a variety of racing harness components, including these seat belt snap hooks. They're made from steel with a protective black finish—and fit a variety of 5-point and 6-point SFI harnesses.
( 1 )
$3.75
TeraFlex universal roll cage anchor plates are designed for custom tube projects that need a disconnect for access to components. These foot plates are manufactured from 3/16 in. thick steel and designed with two 1/2 in. bolt holes that are 3 7/8 in. on-center wide, and two 1/2 in. bolt holes that are 2 13/16 in. on-center high.
Not Yet Reviewed
$8.99
Sparco makes a full line of harnesses that works in unity with their competition seats. When it comes time to install your harness, you need only the best hardware. Sparco makes all the harness components you need to easily and safely install your harness into your race car.
( 1 )
$6.00
Zamp Sports offers a variety of racing harness components, including these seat belt slide bar adjusters. They're made from steel with a protective black finish—and fit a variety of 5-point and 6-point SFI harnesses.
( 1 )
$2.80
—
$3.75
Goodmark offers seat belt anchor bolts for a variety of classic cars from the 1960s and '70s. They're available polished or cadmium coated. Order the hardware recommended for your application—then buckle up and stay safe.
( 6 )
$7.99
—
$10.99
Schroth Racing sleeves provide the ideal situation for bolt-in harnesses. They allow the bracket to pivot on the bolt, allowing perfect geometry to be achieved. The pivot action allows the force that is applied on the webbing to dictate the orientation of the bolt, therefore, achieving the desired orientation of the bracket. These bolt pivot sleeves must be used in conjunction with a washer on one side. Schroth Racing offers these sleeves in different sizes for different size bolts, order the sleeve suited to fit your application needs.
( 2 )
$3.50
—
$3.80
Longacre Racing ProTecto roll bar padding employs a manufacturing process called Micro-Cell. Gas injected into the hot resin during the extrusion process creates tiny, uniform cells that make up the material, providing your padding with much better cushioning ability. Longacre Racing inch-thick ProTecto roll bar padding has a flame-retardant base with an offset hole so you can put the padding where you need it. It comes available in a variety of colors and quantities to suit your needs.
( 9 )
$9.99
Impact Racing harness snap hooks provide a secure mounting point with the convenience of easy harness removal. Impact Racing snap hooks are manufactured from high-strength steel for durability.
( 1 )
$6.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
