Availability
Showing In Stock Items. Show All 11 Items.
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
Ensure your car meets the NHRA safety standards with Fathouse Performance weld-in roll cage kits. Designed and engineered from Docol R8—an advanced, high-strength tubing steel—FP kits are built to satisfy 8.50 ET specs, while providing the best fit possible. They ship pre-bent/notched ready to prep for welding and installation. Contents: * 1/8 in. steel floor plates * 1 5/8 in. Docol tubing * 1 1/4 in. Docol D bars * Steering column mounts Note: Step-by-step instructions are NOT provided with this kit. Fathouse Performance highly recommends professional installation.
Not Yet Reviewed
$1,999.99
If you're going to be running 10.99 seconds or quicker in NHRA, you must have at least a 10-point roll cage. If you currently have an 8-point roll bar installed, one of Competition Engineering's 10-point roll bar conversion kits will upgrade your 8-point bar to a 10-point cage. These weld-in kits consist of a top hoop, which attaches to the front of the existing roll bar and follows the perimeter of the roof, plus two supports for the front of the top hoop. Both the top hoop and the supports are made from rugged, 1 5/8 in., 0.134 in. wall, computer mandrel-bent, mild-steel tubing. Even if you aren't required to have a 10-point cage, upgrading your existing 8-point bar will add protection, as well as chassis stiffness that can translate into better reaction times.
( 6 )
$225.99
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$646.99
BMR harness bars allow safe and secure attachment of seat harnesses. They feature steel construction and a durable powdercoat finish in red or black Hammertone. Designed to use a 4-point harness that wraps the main bar for the shoulder straps, the bars have bolt-in tabs on the lap belt portion and can also be used with a BMR crotch strap mount for a 5-point harness. BMR harness bars quickly and easily connect and disconnect with the full interior, front and rear seats, fully installed simply by removing all four bolts, allowing use of the back seat, full access to the interior, or in order to be removed for street driving (ONLY when retaining the factory 3-point seat belts).
( 1 )
$639.95
If you're running full drag slicks, then you need Steeda's new driveshaft safety loops. These NHRA-compliant safety devices keep the driveshaft from digging into the ground and reduce the chance of cockpit entry in the event of driveshaft breakage. The rear support of their twin-rail design makes them very strong and they will install onto existing hardware--there's no need to drill holes in the floorpan or remove your interior. These Steeda driveshaft safety loops will clear a 4.00 in. driveshaft and work with both 1 and 2-piece driveshafts. Best of all, the 2-piece loops mean that you don't have to drop your driveshaft to install it.
Not Yet Reviewed
$294.95
—
$314.95
Fathouse Performance Fab 4-point bolt-in roll bars are designed to provide superior safety and structural integrity for your vehicle. Built in-house, the roll bars are crafted from high-caliber materials, manufactured with precision TIG-welded DOCOL tubing. DOCOL is the highest grade SFI approved material for roll bars and roll cages available, and it is standard in the Fathouse Performance Fab 4-point roll bars. Engineered for straightforward installation, no drilling, cutting, or modifications required, these roll bars bolt into existing holes in the factory corner gusset area with heavy-duty thick steel plates. For enhanced protection during spirited driving or track events, you need Fathouse Fab 4-point roll bars. Available in your choice of a raw finish for a robust and sleek look, or in black or red powdercoated finishes (specify finish when ordering). Product features and details: * Quality built with DOCOL R8 tubing * Precision TIG-welded * Extra clearance seat back bar (works with all OEM Mustang seats) * Threaded harness bungs in seat back bar * Removable rear bars for easy installation * Full seat travel and extra lean back room * Mounting hardware included *Available in your choice of a raw finish for a robust and sleek look, or black or red powdercoated finishes (please specify finish when ordering)
Not Yet Reviewed
$1,499.99
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$437.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
