Availability
Showing In Stock Items. Show All 14 Items.
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$509.95
—
$749.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$646.99
BMR harness bars allow safe and secure attachment of seat harnesses. They feature steel construction and a durable powdercoat finish in red or black Hammertone. Designed to use a 4-point harness that wraps the main bar for the shoulder straps, the bars have bolt-in tabs on the lap belt portion and can also be used with a BMR crotch strap mount for a 5-point harness. BMR harness bars quickly and easily connect and disconnect with the full interior, front and rear seats, fully installed simply by removing all four bolts, allowing use of the back seat, full access to the interior, or in order to be removed for street driving (ONLY when retaining the factory 3-point seat belts).
( 1 )
$639.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$756.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
