Availability
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 141 )
$334.95
—
$874.95
Rhodes Race Cars Funny Car cage conversion kits include all the tubing necessary to upgrade your existing roll cage. These conversion kits can be installed in virtually any existing roll cage or tube chassis vehicle. The tubing is purposely left long so that it can be cut to fit to your vehicle's particular chassis application. Funny Car cage conversion kits are available in the following materials: * 1 5/8 in. X .134 in. wall ERW mild steel * 1 5/8 in. X .120 in. wall DOM * 1 5/8 in. X .083 in. wall chromoly
( 6 )
$249.95
—
$324.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$999.95
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$124.95
—
$474.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
—
$999.95
Rhodes Race Cars Elite Series swing-out door bar kits enable you to convert your existing side bar to a more convenient swing out model, making entering and exiting your race car easier. RRC offers a choice of tubing diameters and thicknesses in mild steel, DOM, or chromoly. The Elite Series comes with male and female clevises that can be used with all roll bars and cages, as well as necessary components and hardware to complete one door side bar. Want easier access to your race car? RRC has the solution with their Elite Series swing-out door bar kits.
( 38 )
$124.95
Rhodes Race Cars Pro Series swing-out door bar kits make it easy to convert your existing side bar to a more convenient swing out model. RRC offers a choice of tubing diameters and thicknesses in mild steel, DOM, or chromoly. The Pro Series comes with clevises and 1/2 in. thick mild steel brackets, as well as necessary components and hardware that can be used with all roll bars and cages. One kit completes one door side bar. Want easier access to enter and exit your race car? RRC has the answer with their Pro Series swing-out door bar kits.
( 14 )
$74.95
Rhodes Race Cars offers a variety of roll bar components, including these steel roll cage floor plates. The 1/8 in. mounting plates measure 6 in. x 6 in. and are available individually or in a set of six.
Not Yet Reviewed
$24.95
Rhodes Race Cars roll bar bolt-in conversion kits allow you to bolt in any 4 to 8-point roll bar without welding base plates to the floor. They use 1/8 in. thick, 6 in. x 6 in. steel plates, which are positioned under the floor to sandwich the existing roll bar plates together. The conversion kits include Grade 8 mounting bolts and hardware. Drilling and welding are required for installation.
Not Yet Reviewed
$24.95
Rhodes Race Cars roll bar padding features offset holes, providing more padding where it's needed on the driver side. It comes in a variety of colors for a custom installation.
Not Yet Reviewed
$7.95
Rhodes Race Cars offers NASCAR-style door bars as an upgrade from their standard door bars. These roll bar/cage components will enhance your safety. Two must be ordered, if you're servicing both the driver and passenger doors.
Not Yet Reviewed
$99.95
Rhodes Race Cars roll cage X-brace kits are designed to increase the strength of your chassis by eliminating side-to-side twist and uneven suspension loading. They are recommended for use with the formed rear struts for installation. The kits are available in mild steel, DOM, or chromoly and are offered in 1.625 in. or 1.750 in. diameters. Welding is required to fit them into your vehicle.
Not Yet Reviewed
$49.95
—
$99.95
Rhodes Race Cars safety harness mounting tabs provide a professional and simple way of installing a 5-point safety harness. Thess rugged 1/4 in. thick steel mounting tabs can be welded to roll bars, seat anchors, or other locations to provide secure attachment points. Each package includes five tabs; enough to install a complete harness, and each tab has a predrilled 1/2 in. center hole for attaching harness. Rhodes Race Cars safety harness mounting tabs will make it easier for you to mount and install your seat belt harness.
Not Yet Reviewed
$19.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
