Availability
Special Offer
Milwaukee's M12 paint and detailing color match lights have the best LED color quality and run-time of any handheld color match light. The light features a 98+ Color Rendering Index in five color temperatures to mimic natural sunlight (100 CRI)—the five color temperature options provide a full spectrum of sunlight from early morning to mid-day and overcast. These lights have 1000 lumens of output with a 98+ Color Rendering Index to illuminate metallics and imperfections in the paint and will users to switch between the multiple output modes within each color temperature for optimal control. Light's compact size is designed for handheld maneuverability, paired with a powerful magnet for storage. Additional features: * Light is corrosion-resistant to most chemicals found in paint and body shops; drop rated to heights of up to 6 ft. * IP54 ingress protected against dust and water * High-quality LEDs never need to be replaced, backed by a limited lifetime warranty * Cycle through 5 color temperatures and 3 brightness modes for complete control * Run up to 14 hours on one M12 XC4.0 battery (sold separately); has a 6-hour run-time on HIGH mode
Not Yet Reviewed
$199.00
Infratech portable short wave tube lights are economically priced and feature a 3-switch control for varying the amount of heat output developed. They also feature heavy-duty construction with wide base stands that adjust to over 6 ft. tall and are fitted with four casters. Infratech portable short wave tube lights are suitable for use with solvent-based products, are UL-listed, and can spot heat and light where you need it. Note: Not recommended for use with water-based primers or top coats.
Not Yet Reviewed
$229.99
RBL Products developed their Original UV Putty with rechargeable curing light system that's suitable for smaller repairs to fix chips, scratches, and pin holes on most surfaces, such as metal, aluminum, fiberglass, and more. This complete kit allows you to make minor last second repairs in under a minute! The UV putty cures super-fast, is sandable in less than 30 seconds with 100 percent solids and offers absolutely zero chance for shrinkage. The UV Starter Pack contains a bottle of RBL Products ready-to-use UV Putty and the most powerful cordless worklight in the market. Features and benefits: * Compatible with all paint systems * Most powerful cordless worklight in the market * UV putty cures in less than 30 seconds when used with RBL 10W UV worklight * Translucent in color * Self-leveling * Zero shrink—100 percent solids * No staining—and allows you to spray base coat and clear coat directly over putty * Prime and paint directly over cured putty
Not Yet Reviewed
$104.36
DeVilbiss StartingLine HVLP gravity feed paint and primer spray gun kits include a 1.3mm fluid tip and a 600cc aluminum cup. This setup is ideal for the atomization of base coats, clear coats, and other light-viscosity coatings. The other gun features a 1.8mm fluid tip and a 600cc aluminum cup. The 1.8mm setup is suitable for spot repairs using a variety of primer coatings. The DeVilbiss StartingLine HVLP gravity feed paint and primer spray gun kits include a gun-cleaning brush set, a gun maintenance wrench, an air regulator with a gauge, and a blow-molded carrying case.
( 138 )
$194.99
The FLG spray guns by DeVilbiss provide a low-cost, general-purpose solution for a wide range of refinish paints and coatings—including most routine spray jobs in the refinish workshop, as well as handling DIY enthusiasts' projects. DeVilbiss offers this versatile spray gun equipment in gravity and suction-feed setups for batch applications, or as a pressure-feed option for larger project areas requiring fast coverage without the added downtime of re-filling small cups. Enjoy full control of the paint pattern shape, along with consistent fluid flow rate, and air inlet pressure for precision paint application with DeVilbiss FLG spray guns! Product features include: * Ergonomic gun handle shape for balance, grip, and comfort * Smooth action trigger with exceptionally light pull for reduced fatigue during long operation * Efficient atomization technology for reduced material usage
( 9 )
$244.99
—
$349.99
3M Products offers welding and spark deflection paper, a flame-retardant, repositionable, adhesive-backed paper product used to protect vertical surfaces from damage caused by welding spatter and grinding sparks. This welding deflection paper is ideal for use for protecting automotive glass, painted sheet metal, automotive light fixtures and other vertical surfaces. The same paper can be cut to size specific repairs and can be used for numerous placements, as needs change during your project.
Not Yet Reviewed
$170.99
Infratech infrared replacement elements keep your shop or garage up and going when it counts. These UL-listed replacement elements are direct fits for your Infratech portable infrared systems. They are available in 1,500 and up to 3,000 watt versions to keep your lights up and running, helping you to cure paints and body repairs faster than the competition.
( 2 )
$67.99
—
$139.99
Detail like a Pro with Pro Pet Hair Tool Kits! Our pets love going for rides in our car, truck, or SUV, but it sure makes a hairy mess of our vehicle's interior. The Pro Pet Hair Tool Kit has everything you need to remove stubbornly trapped pet hair from every inch of your vehicle's interior. Features and details: * Same soft blade design as the best-selling Mini Pet Hair Detailer * Curved shape and finger strap for effortless control * Extended reach for crevices and corners * Soft blade easily pulls out embedded pet hair out of any car fabrics * Ergonomic shape and finger strap allow for effortless sturdy grip * Use crevice tool for those hard-to-reach spaces * Use this auto detail kit with a vacuum for a clean like you haven't seen in years! How to use: Vacuum first to remove loose dirt. Pull detailer tool towards you using short strokes and light downward pressure. For best results, occasionally clean dust from tools with a damp cloth.
Not Yet Reviewed
$35.99
The KBS HVLP Professional spray guns are designed for water and solvent based paints, primers, and clear coats. These economical spray guns are made from high-quality stainless steel and are available in two popular spray tip sizes: 1.4mm or 1.8mm—both promote excellent spraying efficiency. The 1.4mm spray tip is ideal for basecoats, clearcoats and other light to medium viscosity paints and coatings. The 1.8mm spray tip is excellent for build primers and medium to heavy viscosity paints and coatings. For professional results at a fraction of the cost of other spray gun models, you need the right equipment—choose KBS HVLP spray guns. Select the model for your application needs. Key features: * High-quality stainless steel nozzle and needle * Excellent spraying efficiency * High-efficiency; above 65 percent transfer * Smooth, comfortable trigger pull * Consistent atomization * Sprays in a large fan pattern * Sprays a full range of coatings water and solvent based * Working Pressure: 20-45 psi * 600 CC cup * Air Consumption: 6 cfm @ 43 psi * Includes cleaning brush and wrench
( 1 )
$54.99
KBS offers HVLP spray gun needle, nozzle, and air cap sets designed specifically for use with the KBS HVLP spray gun (sold separately). The 1.4mm tip setup is a very universal tip size, ideal for use with base coats, clear coats, single stage, primers, and other light to medium and some heavier viscosity paint coating materials. The 1.8mm tip setup is ideal for use with primers, 2K primers surfacer, sealers, topcoats and other medium to high viscosity paint coatings. The 2.0mm tip setup is ideal for use with high build primers, 2K primer surfacers, sealers, and other high viscosity paint coatings. Each set includes stainless steel fluid nozzle, one needle tip and the air cap. Order the set for your application needs. Features and benefits: * Coatings are fully atomized with the ideal fan pattern so that they lay down perfectly giving you a clean even finish * Excellent spraying efficiency * High-efficiency (above 65 percent transfer) * Consistent atomization * Large fan pattern * Spray a full range of coatings; water and solvent based
Not Yet Reviewed
$16.99
USC delivers masking products that save you time and money. US Chemical Handy Mask masking paper allows you to tape and mask in one step! It's the perfect size for masking headlights, bumpers, and door jambs. Use it to tape and mask everything from headlights to taillights, mirrors to side molding, and more (automotive, marine, industrial, and household uses). Handy Mask is available with dispenser and for refills.
Not Yet Reviewed
$128.99
—
$154.99
Once you've finished the metal work and major body repairs on your project car, it's time to prep it for primer and paint. One of our tech reps has been painting cars for years, so we tapped his experience to put together these Summit Racing™ paint prep bodywork and sanding combos. They include the tools and materials needed to prep one mid-size muscle car (like a Chevelle or Torino) for paint. Nobody likes spending hours sanding and fixing small imperfections, but it's gotta be done. This combo includes Summit Racing™ sanding discs and paper in various grits, two Dura-Block sanding blocks, and U.S. Chemical Kromate body filler and glazing putty to smooth out any remaining dings and dents. Summit Racing™ paint prep bodywork and sanding combos include: * Summit Racing™ 6 in. 40 grit sanding discs * Summit Racing™ 6 in. 80 grit sanding discs * Summit Racing™ 6 in. 150 grit sanding discs * Summit Racing™ 6 in. 320 grit sanding discs * Summit Racing™ 80 grit sandpaper roll * Summit Racing™ 180 grit sandpaper roll * Summit Racing™ 220 grit sandpaper roll * Dura-Block long sanding blocks * Dura Block short sanding block * U.S. Chemical light Kromate body filler * U.S. Chemical body finish putty
Not Yet Reviewed
$250.84
DeVilbiss StartingLine HVLP gravity feed paint spray gun kits include a 1.3mm fluid tip and a 600cc aluminum cup. The 1.3mm setup is ideal for the atomization of base coats, clear coats, and other light-viscosity coatings. The other gun features a 1.0mm fluid tip and a 250cc plastic cup. The 1.0mm setup is suitable for spot repairs using a variety of coatings. The DeVilbiss StartingLine HVLP gravity feed paint spray gun kits include a gun-cleaning brush set, a gun maintenance wrench, an air regulator with a gauge, and a blow-molded carrying case.
( 16 )
$214.99
3M Products booth coating is a water-based solution to protect paint booth walls, lights, etc. from paint and primer overspray. It dries to a clear film, is easily applied with a conventional paint gun, and washed off with water. For optimal lighting and cleanliness, spray your paint booth with 3M booth coating.
Not Yet Reviewed
$99.99
Infratech portable medium wave infrared systems are designed to cure paints and body repairs faster. These UL-listed units feature lamps with parabolic reflectors for uniform heat distribution. The heavy-duty stands are adjustable to cure roofs and hoods, and they have casters to roll into position quickly. Infrared systems are available in your choice of energy-efficient wattages and coverages. Most systems have a 60-minute timer, which turns the heat off when time expires; and most lamps can be positioned vertically or horizontally to cure hard-to-reach spots. Select the size, power, and layout style preferred for your applications.
( 8 )
$227.99
—
$5,595.99
Infratech portable short wave infrared systems are designed to cure paints and body repairs faster. These UL-listed systems feature halogen elements, which offer hotter, faster, more efficient heating capabilities. They range from 1,000 to 6,000 watts, with quality design features that provide long-term convenience and value. Their heavy-duty stands are adjustable to cure vehicle roofs and hoods and they have casters to roll into position quickly. Infratech portable short wave infrared systems are available in your choice of an energy-efficient wattages and coverages with most models including 60-minute timers to turn the systems off when time expires, and lamps that can be positioned vertically or horizontally to cure hard-to-reach spots.
Not Yet Reviewed
$354.99
—
$4,418.99
Infratech portable waterborne drying systems offer rapid drying times for waterborne and solvent-based coatings. They are a compressor-free alternative for the heavy demand in most body shops. Infratech portable waterborne drying systems are available in a standard 4-position speed-dry system and a speed-dry and heater combo unit for increased speed and versatility.
Not Yet Reviewed
$283.99
—
$457.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
