Availability
Summit Racing Equipment® 2-stage system low 2.1 VOC clear coat is a high-solid urethane, rated at just 2.1 VOC. It provides the same excellent gloss, leveling, blending, and buffing characteristics as our standard 2-stage clear coats, so you can meet strict volatile organic compound standards without sacrificing quality. It's fast-drying, easy-to-apply, and requires mixing in a 4:1 ratio with Summit Racing™ 2.1 VOC clear coat hardener.
( 86 )
$42.99
—
$43.99
SEM Products low VOC rubberized undercoating is 100 percent asphalt-free, fast-drying, and is even paintable. It's available in an easy-to-spray aerosol can to make application super-quick and easy. This unique product provides a protective barrier against rust and is also chip-resistant. It's great for rust-proofing wheelwells, fenders, and undercarriages on your vehicle and features sound-deadening properties. Make the right choice with SEM.
( 8 )
$22.99
—
$41.99
If you don't have a climate-controlled paint booth and you need a low-VOC reducer, Summit Racing™ low-VOC 2-stage system base coat reducer is available to work at different temperatures. Just mix it 2:1 with base coat paint, add 1 oz. of clear coat hardener per ready-to-spray quart, and you're ready to complete your auto project with timeless hues or hot, sporty colors. Summit Racing™ base coat reducer can also be used with our 2-stage system epoxy.
( 5 )
$41.79
—
$50.79
Summit Racing Equipment® single-stage low-VOC hardener mixes with our single-stage paints. It will provide incredible color depth and an easy application; while complying with more stringent local emissions standards--plus, the flash time between coats is just minutes! Order the Summit Racing Equipment® single-stage low-VOC hardener designed to be used in your temperature range (see product container and/or instructions for proper mix ratios). Product options: * Fast-drying hardener: for use in temperatures between 60 and 75 degrees F * Medium-drying hardener: for use in temperatures between 70 and 90 degrees F * Slow-drying hardener: for use in temperatures from 85 degrees F and up
( 14 )
$40.99
—
$41.99
Proper application of Summit Racing™ Chassis Shield paint requires Summit Racing™ Chassis Shield catalyst. The catalyst mixes with Chassis Shield resin at a one-to-one ratio, resulting in a high-grade epoxy that sticks to bare metal with no primer required. It provides superior protection against peeling, cracking, and scratching. Get it done right the first time with an assist from Summit Racing™ Chassis Shield catalyst. Summit Racing Single-Stage Urethane Paint System is formulated to meet National Rule VOC emissions standards. However, some local guidelines require more stringent formulations. If unable to complete your paint order on SummitRacing.com, it may be due to your local guidelines. Please call 1-800-230-3030 for further assistance.
( 6 )
$29.99
Mix our Summit Racing Equipment® 2.1 VOC primer sealers 5:1 with a fast or medium 2.1 VOC primer sealer hardener. You can even blend sealers to create a full range of grayscale tones to best match your top coat. These acrylic urethane paints are available in gallon or quart sizes—in shades of black, white, or silver/gray.
( 71 )
$34.99
—
$36.99
On Sale
Valco Solvent 200 effectively removes cured silicone and is a great pre-painting prep to remove contaminants that cause fisheye. Solvent 200 is also excellent for removing wax before applying a fresh coat. It is safe for use on a wide range of materials including plastics, metals, painted surfaces, glass, and more. It is non-VOC, clear, odorless with low toxicity, and evaporates completely at room temperature. Product is non-VOC. Product features and benefits: * Removes cured silicone * Dissolves most oils and greases * Removes silicone waxes and detailers * Safe on most plastics, paint, metal and glass surfaces * Can be used to prep surfaces for painting * Solvent also works well for uncured silicone * Non-VOC
Not Yet Reviewed
$54.25
$48.82
Summit Racing Equipment® 2.1 VOC high-build primer works as the glue that holds your paint in place. Choose your primer based on the material and condition of the surface to be painted. It mixes with 4:1 with hardener.
( 35 )
$39.99
Let's face it--you can't really enjoy your classic car if the interior looks like it hasn't been taken care of in decades. OER premium quality interior paints will have your vehicle's interior looking factory-fresh once again. Available in several colors and in aerosol or sprayable quart cans, these interior paints can be used on vinyl, leather, ABS plastic, polycarbonate, polyurethane, polypropylene, Lexan, acrylic, and recycled plastics. These OER premium quality interior paints are UV-stable, colorfast, and won't crack, peel, or flake. Enjoy your vehicle's interior again with OER premium quality interior paints.
( 70 )
$24.99
—
$40.99
Use Color Coat from SEM Products for a perfect finish on your interior restorations. Color Coat flexible coatings can do it all--from vinyl to plastics to carpet, they offer a complete renewal for the inside of your ride! Containing no dyes, SEM permanent interior coatings are formulated to match, restore, or change the color of your existing interior components without fading and maintain the material's texture and feel. Choose from a wide selection of colors to rejuvenate the inside of your ride. Make the right choice in interior restoration--SEM Color Coat!
( 319 )
$28.99
Proper preparation helps to make your project perfect, and DeVilbiss tack wipes are ready to meet your surface preparation needs. They offer two types--cotton and polyester cloths. Their cotton wipes are made from soft cotton mesh and feature an all-purpose medium tack. The poly-knit cloths are dry tack and are manufactured from soft polyester. Both wipes are compatible with all paints and are wax and silicone-free. Prepare for a great finish by removing dirt, lint, dust, and sanding particulates from surfaces with DeVilbiss Tack Wipes--engineered to leave no residue!
( 11 )
$25.99
Are you getting ready to paint the interior or exterior plastics on your classic ride? These OER interior and exterior plastics surface preparation formulas are just what you need. These surface preparation formulas are specially designed to remove dirt and grease, promote adhesion, and prime interior and exterior plastic parts for painting. These formulas can be used on many interior and exterior parts, including dash pads, headrests, TPO bumpers, and door panels. These OER interior and exterior plastics surface preparation formulas are sure to give your paint the perfect foundation to adhere to.
( 4 )
$37.99
Dentec Safety Specialists supplies a variety of particulate filter replacements so you can choose the appropriate protection for your application. Their "Saf-Twist" design quickly attaches to any Dentec half-mask or full face air-purifying respirator facepiece. The offset connector design improves visibility and allows facesheilds or welding helmets to be worn without interference. Select the set needed for your air respirator.
Not Yet Reviewed
$28.80
Are you rolling on those factory original wheels that just need a freshen-up? If so, OER factory wheel coatings can get your wheels looking showroom-new. Available in a variety of colors, these factory wheel coatings will provide the exact amount of sheen, texture, and color that your factory wheels originally had. Get the spray gun results you've always wanted without the mess by using OER factory wheel coatings.
( 25 )
$20.99
—
$21.79
Do you need to add the finishing touches to your restoration project? These OER factory detail coatings are sure to give you just the right amount of sheen and color, depending on the specific area you're working on. These tough coatings have great adhesion characteristics and will not only enhance the quality and appearance of your car, but they will also prevent rust and corrosion. For a spray gun quality finish and long-lasting durability, OER factory detail coatings will make sure that your project gets exactly the right coating it deserves.
( 13 )
$20.99
—
$23.79
Are you looking for the perfect engine paint for your stock vehicle or custom engine build? OER Classic Blend engine paint has you covered. Formulated to be heat-resistant up to 400 degrees F, high-hiding, and correct to the original colors, OER Classic Blend engine paint is also gas and oil-resistant. For spray gun quality results and durability without the mess, OER Classic Blend engine paint is sure to be the perfect paint for your engine.
( 26 )
$20.99
—
$35.79
Is your restoration project in need of some high solids detail coatings? If so, these OER high solids detail coatings are the perfect choice. These high solids coatings provide twice the coverage of conventional aerosol enamels, are available in several colors, and will not run or sag when applied. One 20 oz. can of OER high solids detail coatings is equal to about four 16 oz. cans of other brands. Get maximum coverage for your dollar with OER high solids detail coatings.
( 1 )
$21.99
—
$27.99
Give your farm tractor or lawn and garden equipment a fresh, new look that stands up to the harshest weather and chemicals. Durable Krylon Farm and Implement paint feature original equipment high-gloss, factory-like colors that are weather- and chemical-resistant.
( 7 )
$23.99
Add a colorless base to your colors with Createx Colors 4004 transparent base paint. This base can be used as an inter-coat with minimal build or a protective coat, applied lightly, over your artwork. Or, use it to assist a clear top coat over coarse Createx Colors Gem and Sparkle paint and for bridging over the pearl-flakes. Increase the transparency of your project with a light coat of 4004 transparent base paint from Createx Colors.
( 2 )
$25.99
Createx Colors AutoBorne sealers are revolutionary in their application characteristics. Although water-based, their application resembles that of more traditional solvent coatings. The color-keyed sealers are simple to color tone, easy to apply, self-leveling, fast drying, and quick to clean up. Sanding is not necessary for basecoat adhesion. There are 12 color options at your fingertips—and the options are endless for achieving basecoat color faster and at a lower cost for the ultimate custom look.
( 1 )
$22.99
—
$49.99
Are you looking to win some car show trophies with that restoration project of yours? If so, these OER Metal Mimic FX coatings will help you get there. Available in several finishes, these coatings are made to replicate the appearance of components originally left unpainted from the factory. From cast aluminum housings to galvanized parts, these OER Metal Mimic FX coatings will give your parts that factory-correct appearance that the judges are looking for.
( 2 )
$20.99
—
$22.79
Are you looking for those hard-to-find factory component paint colors for your restoration project? OER original hue paints are specially made to match several OE component paint finishes, including Saginaw steering boxes and GM Delco shock absorbers from decades ago. The judge at your local car show is sure to take notice of the perfect color matching that OER original hue paints provide.
Not Yet Reviewed
$20.99
POR-15 Reducer Solvent is low VOC and appropriate for reducing viscosity and cleaning up when painting with a spray gun or brushing on POR-15 solvent-based coatings. This paint-reducer-thinner formula is of medium temperature speed, and is great for thinning urethane primers, paints, and coatings. Its pure ingredients make this solvent ideal for both spray gun and brush applications. Available in two sizes, select the amount of POR-15 Reducer Solvent preferred.
Not Yet Reviewed
$25.28
Summit Racing™ universal VOC-exempt paint reducer consists of a blend of VOC-exempt solvents. It is designed for use with top coats, primers, clearcoats, and other systems which call for a reduction in regions with especially low VOC limits.
( 1 )
$22.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
