Outdoor & Recreation
Availability
Summit Racing Equipment is your number one source for the gear that’ll get you on the road, and we also have all of the recreational and outdoor essentials you’ll need...
Summit Racing Equipment is your number one source for the gear that’ll get you on the road, and we also have all of the recreational and outdoor essentials you’ll need when you reach your destination. Set up camp with our wide selection of tents and shelters, folding furniture, air mattresses and blankets, portable heaters and grills, and more. Plus, we have all of the tools to keep your other toys in top condition, like handy loading ramps, bicycle locks and hoists, roof racks, and custom boat covers.
Summit Racing Equipment is your number one source for the gear that’ll get you on the road, and we also have all of the recreational and outdoor essentials you’ll need when you reach your destination. Set up camp with our wide selection of tents and shelters, folding furniture, air mattresses and blankets, portable heaters and grills, and more. Plus, we have all of the tools to keep your other toys in top condition, like handy loading ramps, bicycle locks and hoists, roof racks, and custom boat covers.
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,499.95
—
$1,621.95
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,774.95
—
$1,815.95
Clearance
RV Designer offers a variety of parts and accessories to enhance your recreational vehicle, including compartment door locks. These econo cam locks are constructed of stainless steel—and are available in (key) locking and (thumb-turn) non-locking versions. Each kit contains one straight and one offset cam. Select the hole size model you prefer.
Not Yet Reviewed
$7.99
—
$11.99
$3.50
—
$7.50
ODI Grips V2 System snap-on throttle cams can be used with any of ODI's V2 lock-on grip systems, as well as their Fusion and Fusion Pro billet alloy throttle tubes. These cams are designed to fit a variety of motorcycle makes and models.
Not Yet Reviewed
$6.99
When you need parts and components for your American V-Twin, HardDrive can deliver. HardDrive secondary inner camshaft chains will deliver smooth operation and a direct fit for the specified Harley® models. Select the one designed for your motorcycle.
Not Yet Reviewed
$23.36
—
$53.06
When you need parts and components for your American V-Twin, HardDrive can deliver. HardDrive primary outer camshaft chains will deliver smooth operation and a direct fit for the specified Harley® models. Select the one designed for your motorcycle.
Not Yet Reviewed
$71.06
S&S Cycle offers gear cover camshaft bushings for a wide range of applications, including many Harley-Davidson© street bikes from the 1930s thru 2000. These small cylindrical components sit within the camshaft gear cover on an engine, providing a smooth, low-friction surface for the camshaft to rotate against. They essentially act as a wear-resistant guide and support for the camshaft where it exits the engine block and connects to the timing gear. These bronze replacements for Big Twin bikes provide the proper fit and performance of the original parts.
Not Yet Reviewed
$21.95
Cometic Gasket derby cover gaskets and O-rings offer long-term reliability. They are simple yet critical components for sealing various applications. Cometic designs their products to meet the demands of harsh sealing environments, load conditions, and various surface finishes. These premium gaskets and O-rings offer a direct factory fit to provide hassle-free installation.
Not Yet Reviewed
$35.46
Wiseco Powersports Garage Buddy engine rebuild kits are complete with components made from premium materials. They include a complete crankshaft assembly, OEM quality main bearings, all necessary gaskets, seals, o-rings, forged piston kit, and hour meter. The crankshafts feature double-forged connecting rods designed to provide the smoothest rotating assemblies possible. Having a complete bottom-end that's made of 100 percent forged material will give you peace of mind that your motor will last. Order the engine rebuild kit designed for your dirt bike, ATV, and UTV model.
Not Yet Reviewed
$651.99
—
$962.99
HardDrive custom derby covers feature a prominently raised design with three milled grooves to give your primary a beefier look. They are available in a triple chrome plated or black finish. Choose the one in the finish you desire and designed for your motorcycle.
Not Yet Reviewed
$55.76
HardDrive custom points covers feature a noticeable raised designed of three milled grooves that give your motor a beefier look. Available for several Harley® models and a range of years, the covers are offered in a triple chrome finish or black. Select the fit and finish you prefer to match your bike's other components.
Not Yet Reviewed
$19.76
HardDrive offers engine points case covers for a variety of applications—including many Harley-Davidson© street bikes from 1980 and up. Machined from aluminum, the replacement covers are available in different finishes. Their prominently raised design with three milled grooves will give your motor a beefier look.
Not Yet Reviewed
$17.96
HardDrive push rod cover kits for Twin Cams are ideal for quick-install or timesaver-type pushrods. The kit includes tubes, clips, washers, covers, springs, and O-rings. The tubes are shorter and the clips are longer for easier access to the adjuster. Order one for your Harley®.
Not Yet Reviewed
$85.46
Wiseco powersports 4-stroke forged series piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, motorcycles, ATVs, snowmobiles, and outboard marine engines. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with these Wiseco powersports piston kits! Order the piston kit designed to fit your application.
( 1 )
$560.97
Motion Pro's Rev3 Sportbike throttle kits innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions. The Rev3 throttle has several different size reels that will change how much twist is necessary for the throttle to completely open the carbs or throttle bodies on a motorcycle. The larger the reel is, the shorter the twist. Each reel size will shorten the twist by about 10 degrees. If your stock throttle has a 40mm reel and stock twist is 90 degrees (1/4 turn), the 45mm reel will reduce the twist to 80 degrees and the 50mm reel will reduce it to 70 degrees. The 35mm reel will increase the throttle twist to approximately 100 degrees. This is just an example; every model of motorcycle is different. The included cam reel has a progressive profile, allowing the throttle to act like a sensitive, long twist throttle during the initial small throttle openings for precise control, and then acts like a more aggressive short twist throttle at large throttle openings, progressively shortening the amount of twist needed to reach full throttle. Product details: * Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions * Five different reels provide perfect throttle response for any condition—use smaller reels for a slower throttle rate and larger reels for a faster throttle rate (included cam reel provides progressive throttle response preferred by some riders) * Slim Rev3 throttle housing allows more room for lever clearance and adjustment to the throttle housing position * Improved throttle stop provides greater strength and durability—snap-together elbows make it even easier to install and change reels * Cable boot keeps dirt and dust out for reliable and smooth operation * Rev3 Off-Road kits are compatible with the new Motion Pro DirtControl V2 Lock-On grips and ODI Lock-On grips * Billet aluminum inline cable adjusters ease installation and adjustment * Lower section of cables use 5mm housing with PTFE liner for reduced friction, increased routing flexibility, and lighter weight * Upper section of cables uses 6mm housing to provide solid support for adjusters * Simple to install and maintain * Innovative patented design Kit includes: * Rev3 throttle assembly with throttle tube (Rev3 Off-Road kits include the unbreakable Titan throttle tube) * Motion Pro Rev3 black vinyl cables specifically designed for your bike * Rev3 Sportbike kits include Motion Pro Road Control grips and Rev3 Off-Road kits include Motion Pro DirtControl II grips * Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm * Progressive cam reel—Sportbike kits include road race profile cam reel (orange) and Off-Road kits include off-road profile cam reel (gray)
Not Yet Reviewed
$192.99
ODI Grips MX V2 Lock-On Rogue grips offer slip-free performance. Based off the successful Lock-On MX grips, these grips have an improved grip pattern for greater performance in any condition. Other features include knock-out ends for hand guard use, and the quick change system eliminating the need for glue or wire ties. ODI Grips MX V2 Lock-On Rogue grips are available for 2-stroke and 4-stroke applications and may require an additional throttle cam for installation.
Not Yet Reviewed
$28.99
Motion Pro Rev3 off-road throttle kits include DirtControl II grips and feature innovative reel changing systems that let you tailor the throttle rate to your preference and riding conditions. These 3rd generation Revolver variable rate throttle systems include four interchangeable round reel and a progressive cam reel to provide perfect throttle response for any condition--smaller reels for slower throttle rate and larger reels for faster throttle rate. The cam reel provides the progressive throttle response preferred by some riders. Motion Pro Rev3 off-road throttle assemblies include the unbreakable Titan Throttle Tube, a black vinyl cable specifically designed for your bike, and reels. Select the kit made for your motorcycle. Additional features and benefits: * Slimmer throttle housing allows more room for lever clearance and adjustment to throttle housing position * Improved throttle stop provides greater strength and durability * Snap together elbows make it even easier to install and change reels * Cable boot keeps dirt and dust out for reliable and smooth operation * Billet aluminum inline cable adjusters ease installation and adjustment * Lower section of cables uses 5mm housing with PTFE liner for reduced friction, increased routing flexibility, and lighter weight * Upper section of cables uses 6mm housing to provide solid support of adjusters * Rev3 off-road kits are compatible with Motion Pro DirtControl V2 and ODI lock-on grips
Not Yet Reviewed
$192.99
Wiseco Piston Garage Buddy steel valve kits offer a more convenient and affordable replacement kit for titanium valve equipped vehicles. Precision machined to exacting tolerances and quality inspected for an OEM+ fit and function, these kits offer valve components manufactured by leading and trusted suppliers. Check fitment and availability, then order the kit that best works for you today. Features and benefits: * Matched steel valves and springs provide an engineered solution to your engine * Precision valve springs with rates calculated for added loads from steel valves * Offer extended service life for increased reliability * Complete package with valves and springs for intake and exhaust * Kits include moly paste for cam lobes and buckets
Not Yet Reviewed
$156.99
—
$377.99
No grip—no glory! The Five-Time National Motocross and Supercross champion has outdone himself again! Redeveloping the all-time favorite, the ODI Grips EMIG 2.0 V2 Lock-On Grips are better than ever with no slip-grip performance to give you even more amazing riding experience! Product Overview: * Medium durometer compound for comfort and durability * 100 slip-free performance * Tall knurls for improved crush and better traction with subtle tacky feel * Articulated waffle pattern delivers excellent finger traction for 100 percent slip-free performance—guaranteed! * Tonal Micro-ribbed branding, with contrasting JEFF EMIG Logo * Larger 30.75 diameter, for more dampening in long motos * Amazing colorways, matching most popular motocross and off-road bikes * Designed to fit 7/8 in. size handlebar controls * 110mm grip length/125mm overall length with clamp * The ODI V2 Lock-On System, includes six throttle cams: B, C, D, J, K and M * Lock-on grip provides simple installation and removal—3mm Allen ensures solid twist-free mounting without waiting for glue to dry * No safety wire required means longer grip life, even in the event of a crash * Easy knockout ends to accommodate full-wrap handguards * Throttle tube Included with snap-on throttle cams to match most modern 2-stroke and 4-stroke MX bikes
Not Yet Reviewed
$29.99
Avon Grips Custom Contour Metric Cruiser grips bring comfort and style to your motorcycle. Air pockets in the grips diminish vibration to soften your ride, and the textured surface prevents your hands from slipping. The grips are machined from billet aluminum, with end caps and collars offered in a chrome or black anodized finish. Metric grips are slightly longer than stock grips, so you get a bit more reach—and they feature a unique throttle sleeve that comes complete with interchangeable throttle cams. These grips are available for hundreds of applications, including models from Honda®, Kawasaki, Suzuki, Triumph, Victory, and Yamaha.
Not Yet Reviewed
$74.95
HardDrive breather bolts help you securely install your aftermarket air cleaner. Available for Twin Cam and Evo V-Twins, each kit includes bolts and sealing washers. Kits are also available with bolts, fittings, and sealing washers. Choose the proper kit for your motorcycle.
Not Yet Reviewed
$22.46
—
$27.86
With youth riders in mind, ProTaper Micro handlebar kits offer a reduced-diameter handgrip area, complete with a matching throttle tube, and soft one-third waffle grips. They allow young riders to fully and comfortably grip their handlebars, leading to improved control and drastically reduced hand fatigue. ProTaper Micro handlebar kits include all parts necessary to complete the conversion, making it simple to install onto any two-stroke minibike up to 85cc directly. Other product features include: * Two-thirds of the advanced, abrupt handlebar taper maintains a traditional 7/8 in. diameter, allowing the use of stock handlebar mounts, lever controls, and switches * Exclusive 2000 Series T6 aluminum alloy handlebar construction * Cold-forged aluminum crossbar * CNC-machined 6061 aluminum crossbar clamps adhered with aerospace-quality polymer * High-tech shot-peened, stress-relieved, and anodized handlebar finish for unmatched durability * Left side handlebar knurling provides maximum grip adhesion * 2-piece anodized, knurled T6 aluminum alloy Micro throttle tube with 7 optional cams * Replacement parts available for individual purchase * Handlebar pad included
Not Yet Reviewed
$169.99
Avon Custom Contour Spike Metric Cruiser grips are the perfect blend of comfort and intimidating style. They feature: interchangeable throttle cams (which are able to fit most 1 in. metric cruiser handlebars); very soft but strong Kraton rubber—with a serrated texture for improved control; and 6061 billet aluminum collars and spike end caps for long-lasting strength and style. Available in a triple chrome plated or black anodized finish, Spikes use seamless grip technology and provide all-day comfort. They're available for hundreds of bike applications, including models from Honda®, Kawasaki, Suzuki, Triumph, Victory, and Yamaha.
Not Yet Reviewed
$85.95
Wiseco powersports piston kits include your rings, piston pin, and circlips. These 2-stroke kits feature Pro-Lite pistons that are CNC-machined for optimal cam shape and profile, horsepower, and service life. Wiseco has a decade of experience producing quality pistons for dirt bikes, ATVs, snowmobiles, outboard marine engines, and motorcycles. Their piston kits offer strong, lightweight pistons with optimized designs to improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with Wiseco powersports piston kits.
( 8 )
$296.97
—
$509.97
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
