Automotive Oils, Fluids & Sealers at Summit Racing

Permatex Aviation Form-A-Gasket

Air, land, or water--Permatex Aviation Form-A-Gasket is ideal for most types of gaskets, machined surfaces, and screw thread connections of your plane, boat, or auto engine. This is a slow-drying and non-hardening sealant liquid that changes to a pliable, tacky film to seal your close-fitting parts. It has a temperature range of -65 to 400 degrees F and will resist gasoline, oil, and grease. Permatex Aviation Form-A-Gasket features a brush-top applicator for easy use.

4.57 out of 5 stars ( 14 )

$11.99

—

$18.99

Permatex Form-A-Gasket No. 2 Sealant

Permatex Form-A-Gasket No. 2 sealant is a slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. It allows for easy disassembly if required and works in temperatures ranging from negative 65 degrees to 400 degrees. Permatex Form-A-Gasket No. 2 sealant is capable of resisting common shop fluids and fuels and can be used where sealing is more important than adhesion.

4.63 out of 5 stars ( 8 )

$4.99

—

$14.99

Permatex Form-A-Gasket No. 1 Sealant

Permatex Form-A-Gasket No. 1 sealant is a fast-drying, hard-setting sealant designed for sealing rigid materials and flanges, or for patching holes and joints where permanent assembly is desired. It's ideal for use on freeze plugs, threaded connections, and manifold gaskets in automotive, marine, and motorcycle applications. This product works best for temperature ranges of -65 to +400 degrees F (-54 to +204 degrees C). It's also resistant to common shop fluids and fuels.

Not Yet Reviewed

$6.99

Loctite High-Flex Form-In-Place Gasket Maker

Loctite high-flex form-in-place gasket maker provides high-temperature resistance and more flexibility. This compound fills gaps to 0.020 in. (0.5 mm) and cures to a tough, solvent-resistant gasket that will flex with flange movement caused by vibration, pressurization, or thermal change. For innovative, precise, reliable sealing, look to Loctite! Additional product notes: * Typical gasket applications: PTO housing cover to housing, brake separator plates to brake piston housing, transmission to range box, range box to differential case, centerline bracket to differential case, axle housing to ring gear to differential case * Operating temperature limits of -63 to +350 degrees F (-54 to 177c degrees C)

Not Yet Reviewed

$26.99

TCI Max Shift RTF Racing Transmission Fluid

TCI Max Shift Racing Transmission Fluid (RTF) has been tested and proven to run up to 30 degrees F cooler, even during extreme-heat racing sessions and repeated usage. TCI RTF is uniquely formulated using a new oil-soluble molybdenum additive that greatly reduces internal friction and heat, yet it does not affect clutch and band lockup. It's made using base oils with extremely high viscosity indexes and it contains a special de-foamer agent that reduces fluid foaming, even at 10,000 rpm. In addition, TCI Max Shift RTF contains extreme pressure additives to help control gear fatigue and fracture, actually forming a fluid cushion to help prevent metal-to-metal contact.

4.93 out of 5 stars ( 85 )

$15.95

—

$118.95

Red Line 50WT Race Oil

Red Line 50WT race oil is a multigrade SAE 15W50 full-synthetic oil enhanced with ZDDP. The thermal stability, film strength and reduced parasitic drag found in Red Line engine oils all contributes to lower operating temps, increased engine life and more power. Red Line has a prestigious reputation with racers and enthusiasts alike for creating products that perform and protect better than any on the market. From 11,000 hp nitro engines to class-style applications in all forms of high performance and racing, Red Line has got you covered. Their lineup spans everything from a 5WT race oil all the way up to 70WT nitro oil. Keep your race competition vehicle running at its peak performance with the proper engine oil from Red Line. Born in a lab—proven on the track! Features, benefits, and specifications: * Multigrade SAE 15W50 full-synthetic oil enhanced with ZDDP (for racing engine applications only) * Used in applications with wider bearing clearances * Popular with sprint and midget applications on methanol—offers less frequent oil changes due to less fuel dilution * Special detergents for improved lubricity and less detonation * Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution * Each Red Line product has no less than 2200ppm of zinc and phosphorus for anti-wear * Each Red Line race oil product is a multi-grade, offering 2 to 4 percent more power than oil of a similar viscosity * Improved protection at startup, lower oil temp, cleanliness * Remember to change these oils more frequently than regular motor oils

5.0 out of 5 stars ( 5 )

$20.95

—

$303.43

Summit Racing™ Engine Assembly Lubricant

Summit Racing™ Engine Assembly Lubricant is a specially designed pre-lubricant for all gasoline and diesel engines. It's tacky lubricating film forms a protective coating during assembly and critical start up periods. Formulated from highly refined base oils and fortified with zinc dialkyldithiophosphate and other extreme pressure additives to enhance and sustain anti-scuffing, galling, and wear in. Apply liberally to all engine components including: Engine bearings, wrist pins, Timing components, valves and guides, Pushrod and rocker ends. • Adheres to metal surfaces will not drain off during or after assembly • Zinc and EP Agents provide superior wear-in protection during start-up of new engines • Treated with rust and corrosion inhibitors • Compatible with most engine oils • Exceeds OEM specifications as an Engine & Bearing Assembly Lubricant

4.33 out of 5 stars ( 6 )

$5.99

Red Line 40WT Race Oil

Red Line 40WT race oil is a multigrade SAE 15W40 full-synthetic oil enhanced with ZDDP. The thermal stability, film strength and reduced parasitic drag found in Red Line engine oils all contributes to lower operating temps, increased engine life and more power. Red Line has a prestigious reputation with racers and enthusiasts alike for creating products that perform and protect better than any on the market. From 11,000 hp nitro engines to class-style applications in all forms of high performance and racing, Red Line has got you covered. Their lineup spans everything from a 5WT race oil all the way up to 70WT nitro oil. Keep your race competition vehicle running at its peak performance with the proper engine oil from Red Line. Born in a lab—proven on the track! Features, benefits, and specifications: * Multigrade SAE 15W40 full-synthetic oil enhanced with ZDDP (for racing engine applications only) * Versatile product used in stock car racing, road racing and sprint cars * Used by many of the top Dirt Late Model teams * Used by top teams in NASCAR, Spec engines for Camping World East and West Series * Reformulated for improved frictional properties * Special detergents for improved lubricity and less detonation * Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution * Each Red Line product has no less than 2200ppm of zinc and phosphorus for anti-wear * Each Red Line race oil product is a multi-grade, offering 2 to 4 percent more power than oil of a similar viscosity * Improved protection at startup, lower oil temp, cleanliness * Remember to change these oils more frequently than regular motor oils

5.0 out of 5 stars ( 13 )

$20.95

—

$303.43

Foggit High Performance Fogging Oil

Foggit High Performance Fogging Oil coats internal components inside your engine that can begin to form surface rust in as little as a few days without protection. This unique formula was developed to protect cylinder walls from the damage surface rust can cause to piston rings, valves, and other components. It not only protects internal surfaces from corrosion, but also lubricates cylinders to help prevent damage when starting after storage. Foggit protects your engine by displacing moisture from metal to prevent corrosion on all 2- and 4-cycle carbureted and fuel-injected engines. The aerosol product creates a protective coating on surfaces deep into the engine and with easy application. One 12 oz. can contains about 30 applications, depending on use.

5.0 out of 5 stars ( 5 )

$20.00

—

$150.00

Hot Shot's Secret Diesel Extreme Fuel System Additive

Dirt and water in your fuel system steal the power from your diesel. Your engine needs an extreme cleaning. Hot Shot's Secret Diesel Extreme is a new and powerful formula designed to rejuvenate your diesel's fuel system's performance. Add a dose of Diesel Extreme at your next fill up and your engine's fuel system will be cleaned, restored and boosted to its original performance power. Diesel Extreme will clean everything in your tank, lines and injector tips and remove moisture. Features and benefits: * Boosts cetane by 7 points * Reduces DPF regeneration cycles up to 83 percent * Cleans cylinders, fuel tank, lines and injector tips * Removes internal diesel injector deposits (IDIDs) formed by carboxylate salts and waxy soap deposits and EDID's carbon coking deposits

4.4 out of 5 stars ( 5 )

$12.59

—

$293.99

Red Line 60WT Drag Race Oil

Red Line's 60WT drag race oil is a multigrade SAE 20W60 full-synthetic oil enhanced with ZDDP. The thermal stability, film strength and reduced parasitic drag found in Red Line engine oils all contributes to lower operating temps, increased engine life and more power. Red Line has a prestigious reputation with racers and enthusiasts alike for creating products that perform and protect better than any on the market. From 11,000 hp nitro engines to class-style applications in all forms of high performance and racing, Red Line has got you covered. Their lineup spans everything from a 5WT race oil all the way up to 70WT nitro oil. Keep your race competition vehicle running at its peak performance with the proper engine oil from Red Line. Born in a lab—proven on the track! Features, benefits, and specifications: * Multigrade SAE 20W60 full-synthetic oil enhanced with ZDDP (for racing engine applications only) * Popular in Top Alcohol and Pro Mod classes, AHDRA Nitro bikes and Blown Alcohol Tractor Pulling * Can be heated to evaporate fuel dilution and re-use * Improved valvetrain wear, less piston scuffing and improved bearing wear * Reformulated for improved frictional properties * Special detergents for improved lubricity and less detonation * Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution * Each Red Line product has no less than 2200ppm of zinc and phosphorus for anti-wear * Each Red Line race oil product is a multi-grade, offering 2 to 4 percent more power than oil of a similar viscosity * Improved protection at startup, lower oil temp, cleanliness * Remember to change these oils more frequently than regular motor oils

5.0 out of 5 stars ( 1 )

$18.95

—

$303.43

Red Line 30WT Race Oil

Red Line 30WT race oil is a multigrade SAE 10W30 full-synthetic oil enhanced with ZDDP for racing engines only. If you watch your oil temp, you know this viscosity is likely the right one. Red Line has a reputation with racers and enthusiasts alike for creating products that perform and protect better than any on the market. No compromises. From 11,000 hp nitro engines to class-style applications in all forms of high performance and racing, Red Line has got you covered. Their lineup spans everything from a 5WT race oil all the way up to Red Line's 70WT nitro oil. Keep your race competition vehicle running at its peak performance with the proper engine oil from Red Line! Born in a lab—proven on the track! Features, benefits, and specifications: * Multigrade SAE 10W30 all-synthetic oil enhanced with ZDDP (for racing engine applications only) * Popular in NASCAR and Road Racing * Reformulated for improved frictional properties * Special detergents for improved lubricity and less detonation * Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution * Each Red Line product has no less than 2200ppm of zinc and phosphorus for anti-wear * Each Red Line race oil product is a multi-grade, offering 2 to 4 percent more power than oil of a similar viscosity * Improved protection at startup, lower oil temp, cleanliness * Remember to change these oils more frequently than regular motor oils

5.0 out of 5 stars ( 7 )

$20.95

—

$303.43

Summit Racing™ Polyurethane Bushing Prelube

Summit Racing™ polyurethane bushing prelube is a waterproof, non-melting grease. It forms a tough, durable, chemically-resistant film of lubricant, and only a small amount is required to properly lubricate bushings. It's also excellent for preventing metal-to-metal contact and corrosion.

5.0 out of 5 stars ( 14 )

$11.99

Schaeffer's Moly EP Oil Treatment

Schaeffer's Moly EP Oil Treatment is a highly fortified extreme pressure engine oil treatment that contains a highly specialized additive. When used at the recommended treatment rate, this additive package allows Moly EP Oil Treatment to provide a wide range of performance benefits. To complement this highly specialized additive package two proven frictional modifiers, Micron Moly, a liquid soluble type of Moly and Schaeffer's own proprietary additive Penetro. These two proven frictional modifiers, once plated, form a long-lasting slippery tenacious lubricant film, which prevents the metal surfaces from coming into contact with each other. By preventing metal-to-metal contact, frictional wear is prevented from occurring. Prevention of metal-to-metal contact and reduction in wear results in a low coefficient of friction, significantly less bearing, ring, piston, cylinder and valve-train wear, an increase in engine efficiency and durability, as well as less downtime and maintenance. Key features and performance benefits: * A reduction in engine friction and wear * Better viscosity control * Extreme pressure protection of the engine bearings, valve train, and pistons and piston rings * Increased compression through better ring seal * A reduction in oil consumption * Elimination of sticking valves and lifters * Reduced blow-by * Increased power * Increased oil pressure

5.0 out of 5 stars ( 3 )

$9.95

—

$404.03

Valvoline Restore and Protect Full Synthetic Motor Oil

Valvoline Restore and Protect Full Synthetic Motor Oil is the biggest breakthrough in motor oil since Valvoline introduced it 150 years ago. With continuous use, Valvoline's proprietary Active Clean technology removes up to 100 percent of deposits, while its exclusive Liqui-Shield technology works to prevent future deposit formation. A clean engine minimizes friction between metal surfaces, helping to improve fuel economy. Valvoline Restore and Protect is the best motor oil for any age vehicle, from a new car's first oil change to high-mileage vehicles. There is no other motor oil like it. Valvoline Restore and Protect Premium Full Synthetic helps maximize fuel economy, horsepower, and engine life. Features and benefits include: * Valvoline developed it first, so you can keep your pistons factory clean * Full synthetic formula * Not an engine treatment—it is fully formulated ILSAC GF-6A and API SP motor oil, exceeding the requirements of each specification * Available in 0W-20, 5W-20, and 5W-30 Grades * First motor oil to actively restore engine cleanliness and protect against future damage * Best motor oil for any age vehicle—from your new car's first oil change to high-mileage vehicles * When it comes to Restore and Protect, consistency is key—use Restore and Protect consistently as recommended by your vehicle's manufacturer to get the best results (it works to its fullest capabilities when used consistently during regular oil drain intervals) * Active Clean Technology—not only does Valvoline Restore and Protect meet today's engine oil specifications but it is the first and only motor oil in market that actively cleans your engine, removing up to 100 percent of engine killing deposits and helping prevent future deposits from forming * Chemically dissolves deposits into microscopic pieces, which are then suspended in the motor oil, eventually leaving the engine during the next oil change, so there is no impact to the performance or longevity of the oil filter * Liqui-Shield helps prevent deposit formation * Wear defense anti-wear protection * Anti-plug technology * Minimizes friction between metal surfaces in your engine to help improve fuel economy * Meets or exceeds API engine oil standards

5.0 out of 5 stars ( 3 )

$9.99

—

$127.99

Lucas Racing Only Gear Oil

Lucas racing only gear oil has been tested on a gear box dyno and was developed with feedback from a major IRL team. Its lightweight, friction-free design is perfect for super speedways, increasing usable horsepower to the ground by reducing drag and friction. Lucas racing only gear oil combines special anti-wear ad lubricity agents with special synthetic base stocks to form a thermally stable product.

5.0 out of 5 stars ( 5 )

$36.79

—

$348.77

Energy Suspension Formula Five Prelubes

Energy Suspension formula five prelubes are versatile, waterproof, non-melting greases containing PTFE. They form tough, durable, chemical resistant films of lubricant. These lubes also prevent metal-to-metal contact even under severe shock loads. Only small amounts are required to properly lubricate bushings and metal components and to prevent corrosion.

4.93 out of 5 stars ( 95 )

$4.99

—

$111.86

KBS Auto Fuel Tank Sealer Kits

KBS Auto Fuel tank sealer kits extend the life of your fuel tank while preventing leaks. Everything you need to clean, prep, and permanently seal up to a 25 gallon tank comes in one convenient, 3-step system. Use the heavy-duty, water-based KBS AquaKlean to thoroughly clean and degrease your tank. Then use the KBS RustBlast to remove rust and etch the interior metal to provide a proper surface for adhesion. The final step is the KBS Gold Standard tank sealer. This sealer is a ready-to-use coating that cures into a tough, fuel-impervious seal that prevents rust and corrosion and permanently seals weld seams and pinholes. Although KBS Gold Standard tank sealer cures to a rock-hard finish, it remains flexible enough to withstand vibration, expansion, and contraction. It penetrates and galvanizes itself to the tank walls, forming a moisture-proof barrier. KBS Auto Fuel tank sealer kits are environmentally safe. Follow the instructions carefully for a rust-free, permanently sealed fuel tank!

4.84 out of 5 stars ( 37 )

$70.99

Loctite 518 Anaerobic Gasket Maker

Loctite 518 gasket maker is a non-corrosive, anaerobic sealer designed primarily for use on aluminum, iron, and steel flanged mating surfaces. It's ideal for on-the-spot emergency repairs, or when a conventional gasket is out-of-stock. The 518 gasket anaerobic gasket maker fills gaps of up to 0.050 in. and forms a flexible, solvent-resistant seal that will not tear or decay. Parts will disassemble easily even after extended service, and old gasket material can be removed with a putty knife. Suggested applications include: * Water pumps * Thermostat housings * Transmission pans * Transmission case covers * Transaxle casings * O-ring replacement

4.86 out of 5 stars ( 7 )

$15.99

—

$63.99

Schaeffer's Moly Roller Chain Lube

Schaeffer's Moly Roller Chain Lube is an anti-wear, extreme pressure, penetrating chain lube formulated to lubricate high-speed or medium-speed roller chains found in automotive, industrial, farming, construction, and mining applications. Moly Roller Chain Lube is blended with penetrating oils, special friction releasing and extreme pressure additives, and rust and corrosion inhibitors. It immediately goes to work penetrating and lubricating pens, bushings, and metal surfaces without attracting dust. Moly Roller Chain Lube forms a solid, longer lasting film that rejects abrasive particles and moisture. This protective layer is capable of withstanding pressures up to 500,000 psi and reduces friction for longer equipment life. Performance benefits: * Eliminates chain stick/slip motion * Powerful protection against rust and corrosion * Quiets noisy chains * Will not swell or shrink O-rings * Quickly produces flexible chain action * Protects against rust and corrosion * Will not affect any seal materials and coatings * Superior extreme pressure and anti-wear properties that increase chain life

Not Yet Reviewed

$16.52

—

$459.00

KRC Power Steering Fluid

KRC power steering fluid is formulated for all forms of racing and high performance applications, making this blend a top choice among many professional race team drivers worldwide. This petroleum-based power lubricating formula runs a quiet pump—while also extending pump life—and reduces heat and cavitation, providing exceptional seal protection. Give your racer an advantage behind the wheel; use KRC power steering fluid for proven, consistent performance after multiple heat cycles!

5.0 out of 5 stars ( 3 )

$12.59

KBS Cycle Tank Sealer Kits

KBS Cycle Tank sealer kits clean, prep, and seal tanks up to 5 gallons in size. This 3-step system includes KBS AquaKlean, KBS RustBlast, and KBS Gold Standard Tank Sealer. Use the heavy-duty, water-based KBS AquaKlean to thoroughly clean and degrease your tank. Then, use the KBS RustBlast to remove rust and etch the interior metal to provide a proper surface for adhesion. Formulated with Oxygen-Block Technology, these prep products reduce the occurrence of flash rust by over 80 percent and extend rust-free storage times by leaving a temporary protective coating in addition to a zinc phosphate film. The final step is the KBS Gold Standard tank sealer. This sealer is a ready-to-use coating that cures into a tough, fuel-impervious seal that prevents rust and corrosion and seals weld seams and pinholes permanently. Although KBS Gold Standard tank sealer cures to a rock-hard finish, it remains flexible enough to withstand vibration, expansion, and contraction. It penetrates and galvanizes itself to the tank walls, forming a moisture-proof barrier. KBS Cycle Tank sealer kits are great for motorcycles, lawn mowers, snowmobiles, tractors, and generators, too!

4.47 out of 5 stars ( 17 )

$44.99

Permatex The Right Stuff Gasket Maker

The Right Stuff gasket maker from Permatex lets you make leak-proof gaskets to custom fit any shape or size for various applications quickly and easily. This elastomeric formed-in-place material is more reliable and longer lasting than pre-cut gaskets. It's formulated to meet or exceed performance standards for long-term sealability, durability, and handling. No wonder this premier instant gasket maker is considered the right stuff! Other features and benefits include: * OEM-specified * Returns equipment to service faster * Sensor-safe * Seals instantly * Fleet-tested * Resistant to ATF, coolant, oil, and other shop fluids

4.77 out of 5 stars ( 57 )

$12.99

—

$36.99

Permatex Liquid Metal Filler

Permatex liquid metal filler is an easy-to-use filler that allows for drilling, filing, sanding, and painting. It forms a long-lasting, metal-tough bond and works on metal, wood, and concrete, with excellent adhesion to galvanized metal. This plaster will also repair cracks or porosity leaks in cast metal parts and fills small holes and perforations. Permatex liquid metal filler resists water, oil, and gasoline, making it ideal for multiple applications!

5.0 out of 5 stars ( 2 )

$4.99