Oils, Fluids & Sealer
Availability
There’s nothing more important to the performance of your vehicle’s vital systems than the proper oil and fluids. So whether you’re maintaining your daily driver or...
There’s nothing more important to the performance of your vehicle’s vital systems than the proper oil and fluids. So whether you’re maintaining your daily driver or pushing a top fuel dragster to its limits, we have the conventional, blended, and fully synthetic oil you need to minimize the damaging effects of heat and friction. And we have more than oil—get the coolant, transmission fluid, gear oil, brake fluid, and octane-boosting fuel system additives that help your vehicle run stronger longer, plus the sealers, gasket makers, and epoxy you need to ensure a leak-free seal and efficient operation.
There’s nothing more important to the performance of your vehicle’s vital systems than the proper oil and fluids. So whether you’re maintaining your daily driver or pushing a top fuel dragster to its limits, we have the conventional, blended, and fully synthetic oil you need to minimize the damaging effects of heat and friction. And we have more than oil—get the coolant, transmission fluid, gear oil, brake fluid, and octane-boosting fuel system additives that help your vehicle run stronger longer, plus the sealers, gasket makers, and epoxy you need to ensure a leak-free seal and efficient operation.
ATP Intake Blast intake system cleaner works to remove carbon and oil deposits that accumulate over time, helping eliminate rough idle, hard starting, loss of power, and pinging. This easy-to-use, aerosol-charged solution applies a highly concentrated cleaning solvent through the plenum, ports, and valves of your intake system, effectively removing deposits. The system cleaner also eliminates the need for additional hoses—and offers an aerosol solution to a solvent that historically had to be suctioned into the vacuum hoses from a separate container. ATP Intake Blast formula is smoke-free, as well as catalytic converter and oxygen sensor safe.
( 1 )
$27.99
Permatex Ultra Black Maximum Oil Resistance RTV silicone gasket maker is fast-curing, sensor safe, low-odor, and non-corrosive. Meeting the performance specs of OE silicone gaskets, this product retains high-flexibility and oil resistance properties through use of a patented adhesion system. Permatex Ultra Black has a temperature range of -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C) intermittent. Suggested applications: * Automotive: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers * Marine: Thermostat housings, water pumps, timing covers, intake manifold end seals, oil pans, valve covers
( 142 )
$4.99
—
$36.99
Driven Racing Oil DI synthetic motor oil delivers cutting-edge lubricant technology specifically developed for direct injection engines. The DI synthetic blend utilizes an advanced additive package designed to reduce abnormal combustion, such as low-speed pre-ignition issues, and protects against soot-related wear. This lower volatility base oil also helps to reduce crankcase vapors and carbon buildup on intake valves. When it comes to the new 2018 API SN+ engine oil spec, providing the right-now solution for direct injection engines—there's no doubt about it—Driven Racing Oil DI synthetic motor oil is ahead of the curve! Order the oil weight recommended for your application. Features and benefits of DI synthetic motor oil: * High-temp, high-shear protection * Prevents deposits on intake valves * Combats abnormal combustion * Tested and proven to protect direct injection engines better than API oils
Not Yet Reviewed
$18.49
—
$233.88
Permatex Ultra Grey RTV silicone gasket maker is perfect for valve covers, oil pans, intake manifold end seals, timing covers, transmission pans, water pumps, and thermostat housings. It's sensor-safe, non-corrosive, and has outstanding oil-resistance and joint movement tolerance. At eight times more flexible than conventional gaskets, you'll be sure to get a leak-free seal.
( 32 )
$4.99
—
$29.99
Red Line SI-1 Complete Fuel System Cleaner is a concentrated package of the most powerful high-temperature detergents available to clean gasoline fuel injectors, intake valves, and combustion chambers. This injector and valve detergent can clean injectors to nearly 100 percent efficiency in one treatment. The cleansing effect on injector deposits can raise fuel economy approximately 12 percent or even more, depending on the condition of the injectors. SI-1 also contains detergents and a synthetic upper-cylinder lubricant, which will help clean the intake valves, pollution control valves, combustion chamber deposits, and carburetors. Order individually, in a set of 12 bottles, or in a 5-gallon bucket.
( 38 )
$15.97
—
$591.38
Permatex high performance thread sealant is formulated specifically for tapered metal pipe thread fittings—and works great as a replacement for PTFE tape and pipe dopes. It cures rapidly to withstand up to 10,000 psi, prevents galling, and protects mated threaded areas from rust and corrosion. Features of Permatex high performance thread sealant: * Contains PTFE * OEM-specified * Standard applications: stainless steel fittings, head bolts into through holes, oil psi sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings * Motorcycle applications: timing hole plug and oil hose fittings * Heavy-duty applications include drain plugs, all tapered fittings
( 8 )
$14.99
On Sale
Royal Purple Max-Clean Fuel System Cleaner & Stabilizer is a state-of-the-art performance fuel system cleaner that maximizes the performance of your fuel system. It restores fuel economy and deeply penetrates and cleans fuel injectors, carburetors, intake valves, and combustion chambers. Max-Clean is EPA/CARB compliant, safe for use in gasoline and diesel engines, and can be used with all ethanol blends or biofuels. It can also be used in both 4-cycle and 2-cycle engines and will not harm vehicle emissions equipment.
( 53 )
$15.99
—
$65.94
$14.39
—
$59.35
Loctite head bolt and water jacket sealant is actually a single-component anaerobic hybrid designed to lubricate fasteners during assembly, as well as seal the gaps between the threads. This sealant locks bolts in place to prevent premature loosening and, should the assembly need to be taken apart in the future, acts as a lubricant to ease the removal of fasteners (through holes into water jackets). Loctite head bolt and water jacket sealant is corrosion-resistant and is designed for typical applications that include head bolts, water pump bolts, intake manifold bolts, and other bolt applications.
( 5 )
$23.99
Loctite RTV 598 black silicone gasket maker caulk gun cartridges contain a fast-curing, sensor-safe, low-odor, non-corrosive compound. RTV 598 meets the performance specs of OE silicone gaskets, retains high flexibility and oil resistance, has a temperature range of -75 to 625 degrees F intermittent, and resists auto/shop fluids and vibration. Loctite RTV 598 black silicone gasket maker caulk gun cartridges were specially designed to meet dealership warranty requirements, but are used and trusted by professionals everywhere. Order the tube volume needed. Suggested applications include: * Valve covers * Oil pans * Intake manifold end seals * Timing covers * Transmission pans
Not Yet Reviewed
$17.99
These two-part bonding products mold like putty, yet harden in one hour to a steel-like consistency. Moroso A&B epoxy won't shrink and isn't affected by solvents, oils, or gasoline. The maximum temperature they can withstand is 250 degrees F, which makes them perfect for repairing intake manifolds, cylinder head intake ports, heads, and blocks. They can be drilled and tapped when hard, adhere to almost any clean surface, and harden in 60 minutes at 75 degrees F.
( 9 )
$42.99
Loctite RTV 598 black silicone gasket maker is a fast-curing, sensor-safe, low-odor, non-corrosive compound. RTV 598 meets the performance specs of OE silicone gaskets and retains high flexibility and oil resistance. It has a temperature range of -75 degrees F to 625 degrees F intermittent and resists auto and shop fluids and vibration. Suggested applications include: * Valve covers * Oil pans * Intake manifold end seals * Timing covers * Transmission pans
Not Yet Reviewed
$7.99
—
$17.99
On Sale
Add Royal Purple Max-Tane diesel fuel injection cleaner & cetane booster to your fill-up for better mpg, quicker throttle response, and a noticeable power increase! The formula cleans deposits from fuel injectors, carbs, combustion chambers, intake valves, and piston crowns. You'll see an increase in fuel economy by up to 10 percent, along with improved engine startup in both warm and cold temperatures. Diesel owners know the downside of a dirty fuel system. Royal Purple cleaner and booster can put the smooth purr back into your engine, while also reducing smoke and odor.
( 5 )
$8.99
$8.09
On Sale
Quicksilver Premium TC-W3 2-cycle mineral oil provides excellent lubrication for outboards, PWCs, motorcycles, snowmobiles, and small engines. The ashless dispersement oil fights rust deposits in the combustion chamber, intake, and exhaust passages. This NMMA TC-W3 lubricant reduces exhaust smoke and controls deposits that can cause spark plug fouling or sticking rings. Available in multiple sizes.
( 1 )
$5.99
—
$97.99
$5.39
—
$88.19
Johnsen's carb and choke cleaner is formulated to quickly penetrate and dissolve dirt and residue to eliminate hard starting, stalling, and rough idling. It removes varnish, sludge, and other deposits from your carburetor, linkage, PCV valves, automatic choke, and air intake. It is also oxygen sensor safe, and meets the requirements of the Ozone Transport Commission that restrict the VOC content of consumer products to 45 percent.
( 3 )
$6.99
Edelbrock high-temp silicon sealant is the right stuff for your intake manifold install. This high-quality RTV silicone is oil-resistant, fast-curing, sensor-safe, and non-corrosive. The sealant is low-odor and meets the performance specifications of OE silicone gaskets. Plus, it will retain high flexibility to prevent the leaks and seepage caused by vibration and thermal expansion. When you're ready to install exhaust components, be equipped for the job with Edelbrock high-temp silicon sealant.
( 18 )
$12.95
—
$23.95
Hot Shot's Secret GASOLINE EXTREME is formulated to be the strongest injector cleaner on the market. The one-tank clean-up formula features a highly effective polyetheramine (PEA) detergent to clean and control deposits found in and on fuel injectors, carburetors, intake valves, and combustion chambers. Gasoline Extreme is compatible with gasoline with a high ethanol content. This unscented fuel system additive is available in a variety of volume/sizes, ranging from 12 oz. to 55 gallons.
( 1 )
$14.99
—
$639.99
Driven Racing Oil XP2 Synthetic racing motor oil utilizes low viscosity synthetic base oils for increased horsepower without decreased durability. The oils uses anti-wear and friction reducing additives to reduce friction and fight valve-train wear. Compatible with methanol and high octane race fuel and restricted air intake engines and engines with tight clearances. Racing applications: * NHRA Stock Eliminator engines * Rolex Grand American engines * GoKART * Quarter Midget * Jr. Dragster * Focus Midgets
( 1 )
$22.97
—
$275.64
Clearance
Lucas Deep Clean GDI cleaner is designed to remedy and prevent problems associated with the harmful carbon deposits that rob your engine of performance and fuel economy. This product is a gasoline direct injection and port fuel injection tune-up. The concentrated aerosol solvent and fuel detergent blend cleans the air intake (runners, ports, and valves), turbos—and supports emissions systems. It's recommended for use every 10,000 miles or with every oil change. Additional product details: * Removes up to half of all valve deposits after one use * Reduces carbon buildup * Restores horsepower and torque * Improves hard starts and rough idle
( 1 )
$17.99
$14.50
Seafoam Spray is for internal engine use only to clean carbon deposits from the intake systems, intake valves, and combustion chambers of your engine. It is a petroleum-based product designed for use in cleaning harmful gums, varnishes, and carbon from air induction systems and combustion chambers on all 2-cycle and 4-cycle gasoline engines. It cures hesitation, stalls, pings, flat spots, and rough idle due to carbon buildup. Seafoam Spray will clean intake valves and pistons, catalytic converters, and oxygen sensors, and will help restore power and pickup.
( 7 )
$16.99
On Sale
Liqui Moly valve clean protects against corrosion in your vehicle's fuel system. A combination of active agents, specifically developed to clean the intake valves and the combustion chamber of port injected engines, do the dirty work for you. Suitable for use in all 4-stroke gasoline engines—with or without turbochargers—Liqui Moly valve clean provides safe interaction with catalytic converters and particulate filters (GPF).
( 1 )
$10.99
$9.89
Roto-Fab air filter cleaning and oil service kits maintain your filter's maximum performance and protection. These service kits include everything you need to correctly clean and re-oil your oil-type air filter included in your Roto-Fab air intake system.
Not Yet Reviewed
$49.95
Edelbrock A&B epoxy is a two-part bonding product that you can mold like putty, yet it hardens in one hour (at 75 degrees F) to a steel-like consistency. The heavy-duty filler blend won't shrink and is not affected by solvents, oils, or gasoline. This epoxy can withstand temperatures up to 250 degrees F, which makes it perfect for repairing intake manifolds, cylinder head intake ports, heads, blocks—and plenty of other projects. Edelbrock A&B epoxy is water- and gasoline-proof, adheres to nearly any clean surface, and can be drilled and tapped after it cures.
( 1 )
$50.95
On Sale
DEI Chill Charger is a revolutionary new high performance additive to improve the efficiency of water-to-air intercoolers. Simply add Chill Charger to the intercooler reservoir, and it will enhance the thermal transfer of hot intake air to the water circulating through the intercooler, resulting in a cooler, denser intake charge for a boost in performance. Both turbochargers and superchargers generate a tremendous amount of intense, power-robbing underhood heat. The challenge is to produce lower intake temperatures to maximize output. Chill Charger is a proven additive that reduces water-to-air intercooler temperatures to improve efficiency for maximum performance. DEI Chill Charger is formulated with a corrosion inhibitor that balances and stabilizes the pH level to protect the core from rust, electrolysis, and mineral deposits. Chill Charger also contains an anti-foaming agent, is safe with all intercooler alloys, and is 100 percent biodegradable, non-corrosive, and non-toxic.
Not Yet Reviewed
$10.99
$9.89
Loctite PST thread sealant sticks are single component, semi-solid anaerobic pipe sealant compounds. The self-feeding applicator sticks facilitate application of the material where a conventional liquid or paste would be difficult to use. Loctite PST sticks cure rapidly to provide immediate low-pressure sealing. The controlled lubricity prevents galling, protects threaded areas from rust and corrosion, and provides easy disassembly. Loctite PST thread sealant sticks are recommended for sealing metal tapered pipe threads and fittings in automotive applications. Suggested applications include: * Stainless steel fittings * Oil and coolant lines * Fuel fittings * Rear axle fill plug * Intake manifold switches * Head bolts into through holes
Not Yet Reviewed
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
