Availability
Stop cooling leaks with the best chemical sealer you can buy. Moroso Ceramic Engine Seal works equally well in aluminum or cast iron blocks. For best results thoroughly clean the cooling system before use. It is not compatible with antifreeze.
( 14 )
$29.99
Moroso's All Weather Seal is specially formulated to stop cooling system leaks when antifreeze is present. All Weather Seal is ideal for stopping radiator leaks and sealing cracked blocks in sub-freezing conditions. For best results thoroughly clean and flush cooling system before use.
( 14 )
$29.99
Loctite Ready Gasket Maker is capable of producing reliable, high performance leak-proof gaskets in one minute! This elastomeric rubber gasket technology is sensor-safe, blowout-resistant, and outperforms pre-cut gaskets. It also resists ATF, coolant, oil and other shop fluids. The compound protects against leaks caused by vibration and thermal expansion—and it's specified on production lines! Order the amount needed for your projects. Loctite Ready Gasket Maker additional notes: * Your equipment can be returned to service immediately * Temperature range: -75 to +450 degrees F continuous; 500 degrees F intermittent * Typical applications: automotive and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, and water pumps
Not Yet Reviewed
$21.99
Permatex spray sealant leak repair forms a durable rubber barrier that stops leaks in minutes. The wicking action seals hard-to-reach leaks, without the need for disassembling or removing parts. Spray sealant leak repair is designed specifically to target low-pressure leaks in hoses, oil pans, differentials, transmission pans, fluid reservoirs, as well as plastic, PVC, and metal pipes, their connections, and much more! Features and benefits include: * Eliminates the need for liquid additive sealers that can swell and foul internal seals * Resists common shop fluids * Note: In many cases, more than one coat will be needed to solve the problem
( 10 )
$17.99
Permatex Indian Head Gasket Shellac Compound was originally developed as a hard-setting, economical gasket sealant. This coating is safe for use on all common gasket materials, even in extreme temperature and low pressure applications. Indian Head Gasket Shellac works in a temperature range of -65 degrees F to 350 degrees F (-54 degrees C to 177 degrees C), and also resists diesel fuels and most shop fluids. Additional notes: * Suggested automobile applications: Hose connections, paper and cardboard gaskets * Suggested marine applications: Hose connections, paper and cardboard gaskets * For leak-proof gaskets and threaded assemblies, apply a thin, even coat to both parts. Allow to dry, then assemble. Resists water, steam, petroleum products, and antifreeze
( 5 )
$3.99
KBS Cycle Tank sealer kits clean, prep, and seal tanks up to 5 gallons in size. This 3-step system includes KBS AquaKlean, KBS RustBlast, and KBS Gold Standard Tank Sealer. Use the heavy-duty, water-based KBS AquaKlean to thoroughly clean and degrease your tank. Then, use the KBS RustBlast to remove rust and etch the interior metal to provide a proper surface for adhesion. Formulated with Oxygen-Block Technology, these prep products reduce the occurrence of flash rust by over 80 percent and extend rust-free storage times by leaving a temporary protective coating in addition to a zinc phosphate film. The final step is the KBS Gold Standard tank sealer. This sealer is a ready-to-use coating that cures into a tough, fuel-impervious seal that prevents rust and corrosion and seals weld seams and pinholes permanently. Although KBS Gold Standard tank sealer cures to a rock-hard finish, it remains flexible enough to withstand vibration, expansion, and contraction. It penetrates and galvanizes itself to the tank walls, forming a moisture-proof barrier. KBS Cycle Tank sealer kits are great for motorcycles, lawn mowers, snowmobiles, tractors, and generators, too!
( 17 )
$44.99
Loctite 263 is a red, dual cure, acrylic dimethacrylate ester fluorescent threadlocker designed for the permanent locking and sealing of threaded fasteners. It cures between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This high-strength compound works on active metals (e.g. brass, copper) and passive substrates such as stainless steel and plated surfaces. Additional notes: * Particularly suited for heavy-duty applications, such as studs into motor housings where high strength is required * Provides robust curing performance * Offers high-temperature performance and oil tolerance
( 4 )
$2.99
—
$21.99
Loctite high-flex form-in-place gasket maker provides high-temperature resistance and more flexibility. This compound fills gaps to 0.020 in. (0.5 mm) and cures to a tough, solvent-resistant gasket that will flex with flange movement caused by vibration, pressurization, or thermal change. For innovative, precise, reliable sealing, look to Loctite! Additional product notes: * Typical gasket applications: PTO housing cover to housing, brake separator plates to brake piston housing, transmission to range box, range box to differential case, centerline bracket to differential case, axle housing to ring gear to differential case * Operating temperature limits of -63 to +350 degrees F (-54 to 177c degrees C)
Not Yet Reviewed
$26.99
Norton Panel Bonding Adhesive is an impact toughened, 2-component epoxy structural adhesive for use in automotive bonding applications. It adheres to a wide variety of properly prepared substrates including steel and aluminum and has an extended work time for large applications but can be accelerated with applied heat. Additional features and benefits include: * Optimum impact strength than traditional structural adhesives * Can be used in weld bonded or rivet bonded OEM applications * Outstanding performance in extreme temperatures -40 degrees F through 140 degrees F (time will increase as temperatures decrease) * Consistent bond line thickness contained by glass beads * For use on outer body panels only (not for use on structural components such as pillars, frame rails, core supports, or rocker panels (on unibody vehicles)
( 1 )
$72.99
Permatex presents bullseye windshield repair kits—the first one-component repair system that's designed to be used by the car owner. Applied via plastic syringe, the crystal clear compound can be used on star damage and bullseyes up to 1 1/4 in. diameter to help prevent further spreading of glass fracture on your laminated glass windshield. Safe and easy to use, these economical kits require no mixing, no heat, and will make the repair virtually undetectable! Permatex Bullseye windshield repair kits include the following- * Permatex windshield repair syringe & plunger * Repair compound NET 0.025 fl oz * 1 adhesive disc * 1 pedestal * 1 curing strip * 1 instruction sheet * Additional tools recommended: push pin and razor blade.
( 1 )
$13.99
—
$14.99
KBS Large Cycle Tank Sealer kits give you everything you need to prepare and seal a large cycle tank of up to 12 gallons. This complete 3-step system includes KBS AquaKlean, KBS RustBlast, and KBS Gold Standard Tank Sealer. Apply the KBS Strip to remove old or failed coatings. Next, use heavy-duty, water-based KBS AquaKlean to thoroughly clean and degrease your tank. Then use the KBS RustBlast to remove rust and etch the interior metal to provide a proper surface for adhesion. Formulated with Oxygen-Block Technology, these prep products reduce the occurrence of flash rust by over 80 percent and extend rust-free storage times by leaving a temporary protective coating in addition to a zinc phosphate film. The final step is the KBS Gold Standard Tank Sealer. This sealer is a ready to use coating that cures into a tough, fuel impervious seal that prevents rust and corrosion, and seals weld seams and pinholes permanently. Although KBS Gold Standard Tank sealer cures to a rock hard finish, it remains flexible enough to withstand vibration, expansion and contraction. It penetrates and galvanizes itself to the tank walls forming a moisture proof barrier. Keep your large cycle fuel tank leak and rust free with KBS Large Cycle Tank Sealer kits!
( 4 )
$48.99
Loctite Professional Performance 300 Spray adhesive creates high-strength, permanent bonds and is suitable for light and demanding interior or exterior applications. This premium-quality spray adhesive resists water and extreme temperatures--and works well on a variety of surfaces, including wood, metal, acrylic, carpet, laminate, PVC and more. Additional product features: * Recommended for bonding decorative laminate/trim work, marine applications, upholstery work, van/motor home conversions, kick plates, signage, wood, metal, glass, crafts, carpet and plastics, polypropylene, acrylics, PVC and more * Offers a strong, permanent bond with no reworking required and no bubbling; multiple coats can be applied to increase bond strength * Also works great for upholstery work, crafts, decorative trim work, and more * Versatile spray adhesive sets in just 10 minutes, with full cure in 24 hours for invisible repairs; dries clear without yellowing with age * CARB Compliant and meets VOC regulations
Not Yet Reviewed
$19.99
Loctite 565 Thread Sealant is a white to off-white, one-part, low strength, high viscosity, anaerobically cured, methacrylate ester, acrylic thread sealant designed for the locking and sealing of metal pipes and fittings. This product cures when confined in the absence of air between close fitting metal surfaces—and prevents loosening and leakage from shock and vibration. Additional details: * Controlled strength sealant is formulated specifically for metal, tapered pipe thread fittings * Replaces most tapes and pipe dopes * Cures rapidly to withstand 10,000 psi * Perfect as a replacement for pre-coated parts * Prevents galling and protects mated threaded areas from rust and corrosion * OEM specified * Automotive equivalent to Loctite Industrial Part 56531 * Typical applications: Stainless steel fittings, head bolts into through holes, oil PSI sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings
Not Yet Reviewed
$15.99
Loctite 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Curing time for steel fixtures is 15 min.; 8 min. for brass, and 180 min. for stainless steel. The heavy-duty threadlocker fluoresces under UV light to allow monitoring. It's ideal for applications where any migration of the adhesive must be prevented. This locking compound can tolerate slight contaminations of industrial oils—and is suitable for all metal fasteners. Additional notes: * Resistant to vibration * Fluoresces to allow quality control and inspection * Thixotropic/low viscosity
Not Yet Reviewed
$10.99
—
$30.99
Summit Racing™ Non-Sag Seam Sealer is a 2-part epoxy adhesive specially designed for sealing interior and exterior seams, joints, and voids. It's easy to use, remains flexible, has a fast cure time, and cures at room temperature. This product requires a 2:1 mixing/applicator gun, which is not included. Additional details: * Excellent adhesion direct to metal * Paintable immediately with any solvent based coating * OEM recommended * Non-Sag Flexible Seam Sealer can be used vertically or horizontally * Work time 12-16 minutes * Cure schedule 20 to 30 minutes at 23 degrees C or 74 degrees F. Full cure in 24 hours * Can be rapidly cured with heat
Not Yet Reviewed
$29.99
Permatex steel weld epoxy is a versatile, easy-to-use, 2-part adhesive and filler system designed to eliminate the need for welding or brazing. It sets in four minutes, with no clamping needed; the dark grey compound fills in gaps and will not shrink. When steel weld epoxy has cured, it can be drilled, sanded, threaded, or filed—it's even resistant to water and solvents! Additional features: * Ideal for complex, multi-piece assemblies * Bonds rigid materials, including aluminum, brass, chrome, copper, iron, stainless steel, steel * Use to seal welded seams, fill metal cracks, and mount metal components * Temperature range -60 to 300 degrees F (-51 to 149 degrees C) * Permanent strength up to 4,500 psi
Not Yet Reviewed
$5.99
—
$8.99
Loctite 592 Thread Sealant is a thick, white, anaerobic-curing lubricating thread sealant paste, which prevents leaks and galling on pipe threads and fittings. The one-part, high-temperature thread sealant provides immediate low-pressure sealing and allows the readjustment of fittings shortly after assembly. The joint seals against pipe burst pressure after 72 hours. Additional details: * Suits applications up to 204 degrees C (400 degrees F) * Unsuitable for plastic piping * High lubricity prevents galling * High viscosity * Provides instant low-pressure seal * Specially formulated to offer easy assembly and removal
Not Yet Reviewed
$15.99
Permatex silicone windshield and glass sealer flows into hidden and hard-to-reach areas. This wicking-action silicone seeks the leak, and forms a tough, waterproof, durable clear seal that's resistant to weather, extreme temperatures, vibration, shock, and most shop chemicals. Additional features and benefits include: * Fills surface voids and irregularities * Temperature range -80 degrees F to 400 degrees F (-62 degrees C to 204 degrees C) * Great for automotive applications such as windshields, sunroofs, windows, headlamp assemblies, RV vents and windows * Ideal for marine applications (windshields, headlamp assemblies, hatches, glass and vents)
( 4 )
$7.99
3M Products 760 UV Adhesive Sealant is a single-component, moisture-curing, elastomeric, isocyanate-free adhesive sealant that offers exceptional UV resistance and long-term durability. With its high performance bonding, this silane modified polymer sealant provides strong, flexible durable bonds that seal against the elements—and excels in challenging industrial, transportation, and construction applications. Additional features: * Single component, moisture-curing sealant offers a simplified production * Recommended Applications: Panel to post bonding on trucks, trains, trailers, and specialty vehicles and also architectural panels * Capable of bonding dissimilar materials, offering long-lasting bonds and design flexibility * Permanently elastic to allow joint movement * Low VOC * Excellent UV resistance and gap filling capabilities * 10-30 minute skin time, paintable immediately * Offered in cartridges and 400ml/600ml sausage packs * Available in a wide variety of Shore A hardness, open time, and colors to meet many application needs * Can be used with 3M Products manual or pneumatic applicator (not included) for dispensing this adhesive sealant
Not Yet Reviewed
$20.99
—
$28.99
Summit Racing™ Plastic Bonding Adhesive is a fast curing 2-part epoxy adhesive specially designed for automotive plastic repair. It's ideal for quickly repairing bumper brackets, tabs, headlight buckets, and grilles. The product may also be used for bonding backer panels, moldings, emblems—and small plastic, metal, and aluminum parts. Plastic Bonding Adhesive is easy to use and maintains its strength over a wide temperature range. Additional details: * Excellent peel and impact strength * Superior environmental resistance * Bonds most plastics (except TPO) and is paintable * Working time 4-6 minutes; sandable in 30-40 minutes * Full cure in 24 hours
Not Yet Reviewed
$29.99
Loctite 3092 adhesive is an ultra-fast gel adhesive that can bond gaps up to 2mm in depth. It's excellent for general repairs for interior molding clips, consoles, dash components, molded bumpers, body and trim repair. Once dispensed in between close-fitting parts, the atmosphere moisture initiates the curing process. Three mix nozzles are included. Additional product information: * 3092 adhesive is a two-component, rapid cure cyanoacrylate adhesive for bonding a variety of plastics (except PE, PP and PTFE), rubber and porous materials (wood, paper, leather) * Virtually eliminates blooming and frosting Note: This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet (MSDS).
Not Yet Reviewed
$6.99
Clearance
Ajusa Silicone Sealant is resistant to low and high temperatures. It's designed for professional application in industrial and automotive uses, vulcanizing in 15 minutes at room temperature. This product is applicable for the formation of mechanical gaskets resistant to oils and some chemical products (not concentrated acids)—and for the sealing of tanks and pipes of this kind of product. Additional details: * Operating temperature from -60 to 300 degrees C * Advantage: It provides total sealing in gaskets * Resistant to water, UV rays, humidity, temperature changes and vibrations * Not resistant to solvents * Available in multiple sizes
Not Yet Reviewed
$36.99
$14.50
Clearance
Tracerline CoolSeal A/C leak sealer is a unique additive that seals slow, pesky leaks in compressors, condensers, evaporators, accumulators, O-rings and hoses—quickly and permanently. The non-polymer, oil-soluble formula is safe for air conditioning system components and recovery equipment, and it's compatible with all popular refrigerants. CoolSeal is a practical alternative to expensive parts replacement on older, high-mileage vehicles and can remain safely in the system to guard against future leaks, making it ideal for preventive maintenance. This sealer is available individually or in a kit that includes an A/C system adapter.
( 1 )
$36.99
$26.50
Clearance
3M Products flexible package applicator guns are used in variety of repair applications, and are an essential tools for any auto body shop. These applicator guns are for use in the application of seam sealers for automotive seams and joints, and are made to fit 310 ml packages. 3M flexible applicator guns deliver a steady stream of semi-liquid sealer for precise application in tight cracks and seams, and are versatile for use with a full range of sealers on a wide range of automotive materials, such as glass, metal, and fiberglass, as well as on painted surfaces. Additional product features: * Applicator gun is made with all metal components to withstand years of use and rugged working conditions * Fully enclosed body can be easily removed and cleaned * Internal driver; rod driven friction feed provides firm, consistent pressure during use * Designed to fit flexible foil packages of 310 mL or smaller * Fully enclosed case makes package changes quick and easy * Applicator gun tool has a 12:1 dispersion ratio
Not Yet Reviewed
$148.99
$102.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
