Availability
Because of frictional inconsistencies with oil, moly, and other lubricants, it takes multiple cycles of torquing the bolt, loosening it, and tightening it again to obtain the required preload or stretch. Typically, when a fastener is first tightened, friction is at its highest point and the preload value or stretch is low. As the fastener is cycled numerous times the friction decreases and the preload increases. This phenomenon is called "preload scatter." With ARP Ultra Torque assembly lubricant, a fastener need only be torqued once to get within 5 percent of ideal preload, and it remains consistent through all subsequent cycles (from race-prep machining through final assembly). Moreover, given the inconsistencies of ordinary lubes, it's quite possible for adjacent head bolts or studs to have vastly different preloads. This scatter causes bore distortion, hampers piston ring seal, and leads to poor head gasket sealing. Order the tube or container size needed for your applications.
( 297 )
$1.99
—
$28.99
Jet-Lube SS-30 Pure Copper Anti-Seize will literally “copper plate” mating and sliding surfaces to protect against seizure, galling, and heat freeze. This non-melting, non-volatile base grease contains a high content of micro-size copper flakes that prevent metal-to-metal contact. It also maintains lubrication qualities under wide variations of temperature, expansion, contraction, and cyclic loadings. The compound contains no lead or graphite, does not require mixing, and will not separate, settle out, harden, or dry out in storage. SS-30 is fortified with antioxidants and corrosion inhibitors—and has many uses: taps, lugs, wiping contacts, drum switches, slip rings, and more. Multiple container sizes are available. Additional Jet-Lube notes: * Environmentally-preferred anti-seize thread lubricant and conductive termination compound * Contains high concentration of copper flakes, required for heavy loads or compression * Controlled frictional characteristics allow surfaces of the nut and bolt to be torqued correctly * Assures full hydraulic efficiency, allowing metal surfaces to slide over each other without contact * Works as a similar and dissimilar metal between two metal surfaces to prevent seizing * Will not melt in high temperatures; improves conductivity and continuity
( 12 )
$33.99
—
$65.99
Permatex anti-seize lubricant is designed to be used during assembly to prevent galling, corrosion, and seizing and to ensure easier disassembly. It works great for removing spark plugs, cylinder heads, and exhaust head bolts. Other product features include: * Temperature range: -60 to 1,600 degrees Fahrenheit * Salt, corrosion, and moisture-resistant * Ideal for marine use
( 52 )
$2.99
—
$18.99
Permatex Nickel Anti-Seize lubricant protects metal parts from seizing and galling at temperatures up to 2,400 degrees F. Copper-free, use under conditions of extreme pressure and temperature, and with stainless steel, titanium, and nickel alloys. This lubricant is great for exhaust manifold bolts, exhaust system bolts, muffler clamps, and tailpipe assemblies.
( 16 )
$4.99
—
$40.99
Permatex copper anti-seize lubricant is a premium-quality dressing that may be used to prevent seizing, corrosion, and galling where high-temperature conditions exist. This product contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier—and is fortified with high-quality rust and corrosion inhibitors. It also provides good electrical conductivity. Suggested applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, and fuel filter fittings. Copper anti-seize lube features a brush-top applicator for easy application, and is available in multiple sizes.
( 8 )
$14.99
—
$25.99
Royal Purple Maxfilm synthetic penetrating lubricant is a high film strength, multipurpose lubricant that deeply penetrates, cleans, and loosens rusted parts. Once applied, its solvent carrier evaporates, leaving a tough lubricating film on all metal surfaces and providing long-lasting protection against wear, rust, and corrosion. Royal Purple Maxfilm synthetic penetrating lubricant is designed for loosening parts such as nuts, bolts, locks, and hinges, lubricating power tools, and preserving and protecting parts in storage. Get Royal Purple Maxfilm synthetic penetrating lubricant for superior wear protection.
( 12 )
$11.99
Kano Labs Kroil Original Penetrants, (formerly known as AeroKroil), is an industrial-strength penetrating oil formulated to quickly penetrate deep into small crevices. Kroil attacks rust and corrosion to help loosen frozen or seized metal fasteners such as nuts, bolts, screws, studs, hinges, tools, pulleys, chains, or valves. Safe on all metals, it is ideal for stuck parts on cars, trucks, ATVs, fleet, farm and agriculture engines and equipment. Kroil cleans, displaces water, and helps prevents rust. Its easy application makes even the toughest maintenance jobs easier, faster, and simpler. When stuck on a job or project, use Kano Labs Kroil Original penetrants. They'll get the job done fast and easily the first time! Since 1939, Kano Labs has been an industry-leading producer of penetrating oils, lubricants, and chemical specialty products, and has been used and trusted by industrial and trades professionals and DIYers. Product features and benefits: * Kroil Original Penetrating Oil (formerly Aerokroil) from Kano Laboratories has a strong reputation among professionals as the trusted penetrating oil for any industry *Available in 8 oz. squeeze bottle, 10 oz. or 16.5 oz. aerosol can, or 1 gallon jug (please specify container size needed when placing order) * Tight spaces are no problem—Kroil penetrates small openings, threads, and crevices * Simplifies repairs and magnifies muscles—any additional leverage helps since Kroil loosens tough rusted parts fast and requires less torque to loosen seized nuts and bolts—now that's leverage! * Deters corrosion, removes rust, and carbon deposits—corrosion meets its match, as Kroil removes and prevents rust, cleans carbon deposits and penetrates rusty parts, it also displaces moisture, humidity, and salt water, which makes it perfect for wet, humid environments
( 2 )
$18.30
—
$140.92
Schaeffer's Penetro 90 is a high performance penetrating oil that lubricates all types of moving parts that have become difficult to operate. It is oil-based and blended from Schaeffer's patented formula of penetrating oils, synthetic isoparaffinic hydrocarbons, special friction releasing and extreme pressure additives, and three different types of rust and corrosion inhibitors. This unique blend allows Penetro 90 to penetrate deep into the pores of metals, and cover surfaces with a light, clear lubricating film with lasting staying power. When sprayed onto rusty bolts, it coats each rust particle and acts like tiny ball bearings, allowing the rust particles to easily slide over each other. Performance benefits: * Prevents thread stripping, busts through rust * Projects against corrosion, rust, and abrasive particles * Triples the life of hoist chains and sprockets * Doesn't affect seal materials or coatings * Greatly reduces friction and wear * Protects against moisture and moisture buildup * Superior extreme pressure and anti-wear properties * Lasting performance in saltwater environments
Not Yet Reviewed
$14.77
—
$424.98
When you're dealing with the toughest rust, reach for Summit Racing™ penetrant spray--the rust buster! It penetrates rust, lubricates and protects metal, and loosens corrosion. To use, shake can vigorously for one minute, after mixing ball begins to rattle, spray product on rusted part liberally and allow to soak. Repeat process if rust or corrosion is severe. Summit Racing™ penetrant spray contains graphite and other lubricants to assist in quicker, safer removal of threaded nuts/bolts and rusted parts.
( 4 )
$7.99
Red Line assembly lube is designed to be applied to potential wear surfaces before assembly, in order to prevent metal contact upon startup before adequate lubrication is supplied. Red Line assembly lube will mix with the oils and not plug filters. Use it on all lubricated parts, such as cams, followers, pistons, bearings, and bolt threads. Only a small amount is needed on bearing and piston surfaces--too much can make it difficult to turn over the engine. Red Line assembly lube is an excellent corrosion-inhibitor and can be used on machined surfaces to provide long-term corrosion protection. Do not use this lubricant on exhaust bolts or other high-temperature bolts which require an anti-seize.
( 6 )
$17.99
—
$900.31
Kano Labs/Kroil SprayTech Original Penetrant is an industry proven penetrating oil that has no equal and is available in an easy application 360 degree SprayTech aerosol can that will dispense every drop, from any angle—even upside down! Whether you're dealing with seized bolts, dirt bike motorcycle chains, rusty old door hinges, or stubborn garage door rollers, this Kroil SprayTech Original Penetrant will get the job done! Product features and benefits: * Tight spaces are no problem with Kroil penetrating oil, it quickly penetrates into the smallest gaps between metal parts to loosen corrosion, dissolve carbon deposits and break lose seized parts, making even the toughest maintenance jobs easier, faster, safer and simpler to execute * Attacks corrosion, removes rust and carbon deposits—also displaces moisture, humidity, and salt water, which makes it perfect for wet, humid environments * Two-way dispensing—use the straw in the down position for a broader pattern or flip it to the top position for a tighter, more precise application * Nozzle design dispenses every drop of penetrant from the bottle, leaving nothing behind—the integrated straw is always where you need it! * Spray from any angle to dispense Kroil quickly and easily from any angle, even upside down!
Not Yet Reviewed
$30.16
Lucas Penetrating Oil loosens rusted-on nuts and bolts, finding its way into the tiniest of crevasses between metal parts and lubricating them. This penetrating oil is fortified with powerful corrosion inhibitors and wetting agents that ensure protection to parts exposed to the elements. Evaporation is slow, leaving a tenacious film that fights water and corrosion. The aerosol can be used on bolts, hinges, sliding doors, bearings, bicycle chains, and a hundred other uses around the garage, shop, office, or home! Equipped with a locking pop-up tube and 360 degree applicator for precision application, Lucas Penetrating Oil goes where you want it to—and you never lose the applicator straw! Key features and benefits include: * A truly superior penetrant designed to dissolve corrosion and rust without drying * Provides a microscopic film that rust-proofs for up to a year indoors and outdoors * Aerosol can of penetrating oil can be used in any position—even upside down! * Excellent protection against water (even salt water) * Fortified with anti-seize agents * Low odor * Stops annoying squeaks on hinges, doors, etc.
( 2 )
$8.99
—
$90.99
Lucas Extreme Duty Gun Oil is a special blend of oil and petroleum-extracted additives—producing a lubrication specially formulated for high volume, high heat, and friction firearms. It is designed for semi-auto rifles, shotguns, and pistols, as well as full auto firearms and suppressors. The oil offers superior burn-off resistance. Its polymeric film protects metal from rust and moisture—and dramatically reduces wear during all shooting conditions. Applying Lucas Extreme Duty Gun Oil to bores, bolt carriers, and gas pistons makes clean-up of powder residue, copper, and carbon fouling a much easier task. It neutralizes acids from fingerprints and resists drying for long-term storage use. Lucas Extreme Duty Gun Oil is great for lubrication on all high-heat, high-use firearms. It is sold in a variety of sizes and quantities.
( 2 )
$7.99
—
$417.99
Loctite Copper anti-seize sticks provide a shield against high-temperature seizing and galling. Studs, bolts, flanges, and other mated parts can be easily removed in typical dry service temperatures up to 1,800 degrees F (982 degrees C). The copper anti-seize sticks can be used on copper, brass, cast iron, all steel alloys including stainless steel, all plastics, and all non-metallic gasketing materials. Suggested applications include: * Spark plug threads installed in aluminum * Exhaust manifold bolts * Engine bolts * Thermostat housing bolts * Oxygen sensors * Battery cable connections
Not Yet Reviewed
$10.99
Loctite Copper anti-seize provides a shield against high-temperature seizing and galling. Studs, bolts, flanges, and other mated parts can be easily removed in typical dry service temperatures up to 1,800 degrees F (982 degrees C). Copper anti-seize can be used on copper, brass, cast iron, all steel alloys including stainless steel, all plastics, and all non-metallic gasketing materials.
Not Yet Reviewed
$14.99
—
$20.99
Summit Racing™ Extreme Duty fastener lubricant is a heavy-duty, multi-purpose, extreme pressure lubricant and anti-seize compound. Formulated with a balanced blend of petroleum base grease, lubricating solids, anti-galling agents, and rust and oxidation inhibitors, it will reduce, seizing, galling, fretting, wear, and rust and corrosion on metal surfaces for the life of the lubricant. When used with bolts, it creates greater uniformity in clamp load for the same torque compared to an unlubricated bolt. For use on: * Nuts, bolts, studs, washers, and screws * Sensors * Sprockets and chains * Forging dies * Splines and gears * Keyways and shafts * Brake cams and pins * Spark plugs
Not Yet Reviewed
$1.99
—
$17.99
WD-40 Specialist Rust Release Penetrant Spray gets deep into crevices, threads, and seams to break the bonds that hold stuck parts together. The formula features Blu Torch Technology--a proprietary blend of synthetic additives that goes to work quickly on rusted nuts, bolts, threads, locks, and chains leaving behind a protective layer that helps prevent rust and corrosion from reforming. WD-40 Specialist Rust Release Penetrant Spray s 50-state VOC-compliant and safe to use on plastics, rubber and metal.
( 4 )
$15.99
Loctite Silver anti-seize sticks are heavy-duty, temperature-resistant, petroleum-based lubricant compounds fortified with graphite and metallic flake. The lubricant will not evaporate or harden in extreme cold or heat. Use them during assembly to prevent seizing, galling, and corrosion up to 1,600 degrees F (871 degrees C). Suggested applications include spark plugs, cylinder head bolts, and exhaust head bolts.
Not Yet Reviewed
$9.99
When you're dealing with the toughest rust, reach for Summit Racing™ penetrant spray--the rust buster! It penetrates rust, lubricates and protects metal, and loosens corrosion. To use, shake the aerosol can vigorously for one minute; after mixing ball begins to rattle, spray the product on rusted parts liberally and allow to soak. Repeat the process if rust or corrosion is severe. Summit Racing™ penetrant spray contains graphite and other lubricants to assist in quicker, safer removal of threaded nuts/bolts and rusted parts. Bulk orders contain a set of six cans.
Not Yet Reviewed
$43.15
Hot Shot's Secret Never Rust Lubricant is a new multi-purpose, 100 percent synthetic spray lubricant that protects metal parts from rust and corrosion significantly longer than competitive brands. Formulated by Lubrication Specialties Inc., manufacturer of Hot Shot's Secret high performance oils and additives, Never Rust protects any metal surface up to 20 times longer than even top brands like WD-40. It is ideal for use on metal nuts and bolts, cables and chains, metal tools, automotive parts, door latches and hinges, locks, lawn equipment, and much more. Features and benefits: * Protects metal parts and blocks corrosion and rust for years of protection * Has excellent penetration qualities; will not gum, dry out, separate or bleed on equipment * Rust prevention spray prevents squeaks; ideal for preventive maintenance and use in extreme temperatures * Offers -65 degrees Fahrenheit to 300 degrees Fahrenheit operating range—quickly displaces moisture and removes grime and grease * Contains extreme-pressure anti-wear additives * Removes stickers, tape and labels and dissolves adhesives * Is compatible with most seals, except for EPDM rubber * Offers superior rust protection for up to two years
Not Yet Reviewed
$13.01
—
$62.99
Remember to lube the threads before torquing your rod bolts. Howards Cams MSA moly lube is specially formulated for your aerospace-quality rod bolt assembly to ensure proper torque and stretch readings. Do it right and use the lube--Howards Cams aerospace moly lube.
Not Yet Reviewed
$1.99
Liqui Moly GUNTEC Gun Grease is a very cohesive specialty grease with special ceramic lubricants for ultimate performance and safe operation of your firearms. Ceramic lubricants provide minimal friction and reduced wear for maximum reliability, even in critical situations or in extreme temperatures. It safeguards corrosion protection on all metal surfaces. Use Liqui Moly GUNTEC Gun Grease when lubricating handguns, rifles, and shotguns, and on various weapon components. It is highly recommended for metal-plastic, plastic-plastic, and metal-metal friction pairings, such as polymer handgun slides and rifle bolt actions. Benefits: * Excellent wear resistance * Extremely low friction * Wide operating temperature range * Outstanding corrosion protection * Very compatible with plastics * Waterproof * Does not contain resins or acids * High-strength adhesion * Long-term stability
( 1 )
$12.99
Permatex Fast Break super penetrant lubricant will free rusted and frozen parts in all types of assemblies. Locked-up bolts, nuts, and fittings will no longer be a problem as this specially formulated super penetrant quickly and effectively loosens rust, tar, grease, carbon deposits, dirt, gum, and corrosion from metal parts. Save your knuckles (and a replacement purchase) with Permatex Fast Break super penetrant lubricant!
Not Yet Reviewed
$9.99
Breaking rusted and corroded nuts and bolts can add unnecessary time to otherwise simple repairs. John Dow Cre-Oil penetrating oil contains stronger solvents, wetting agents, and specialty oils to destroy the surface tension of rust and corrosion and facilitate decomposition. It is low in viscosity and will not evaporate, helping lubrication and preventing further rust buildup. Simply spray Cre-Oil on the affected area and remove the nuts and bolts. Cre-Oil is formulated for use in many applications such as automotive, farm and agriculture, industrial/maintenance, fleet, heavy-duty and performance. It can be used on pipe threads, pulleys, screws, fasteners, hinges, suspensions, chains, casters, cables, gears, electrical terminals, and brake calipers. Loosen the bonds of rust and corrosion with John Dow Cre-Oil.
Not Yet Reviewed
$27.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
