Availability
Because of frictional inconsistencies with oil, moly, and other lubricants, it takes multiple cycles of torquing the bolt, loosening it, and tightening it again to obtain the required preload or stretch. Typically, when a fastener is first tightened, friction is at its highest point and the preload value or stretch is low. As the fastener is cycled numerous times the friction decreases and the preload increases. This phenomenon is called "preload scatter." With ARP Ultra Torque assembly lubricant, a fastener need only be torqued once to get within 5 percent of ideal preload, and it remains consistent through all subsequent cycles (from race-prep machining through final assembly). Moreover, given the inconsistencies of ordinary lubes, it's quite possible for adjacent head bolts or studs to have vastly different preloads. This scatter causes bore distortion, hampers piston ring seal, and leads to poor head gasket sealing. Order the tube or container size needed for your applications.
( 297 )
$1.99
—
$7.99
Permatex anti-seize lubricant is designed to be used during assembly to prevent galling, corrosion, and seizing and to ensure easier disassembly. It works great for removing spark plugs, cylinder heads, and exhaust head bolts. Other product features include: * Temperature range: -60 to 1,600 degrees Fahrenheit * Salt, corrosion, and moisture-resistant * Ideal for marine use
( 52 )
$2.99
—
$9.99
Loctite Threadlocker 242 is an all-purpose, medium-strength, blue threadlocker. It's ideal for all nut and bolt applications from 1/4 in. to 3/4 in. or 6mm to 20mm. Threadlocker 242 eliminates the need for expensive locknuts and lock washers. It locks and seals, while preventing parts from loosening due to vibration and protecting threads from corrosion. The product is removable with hand tools for easy disassembly. Suggested applications include: * Valve cover bolts * Water pump bolts * Oil pan bolts * Driveshaft bolts * Rocker arm adjustment nuts * Carburetor studs
( 1 )
$1.99
—
$8.99
When you're dealing with the toughest rust, reach for Summit Racing™ penetrant spray--the rust buster! It penetrates rust, lubricates and protects metal, and loosens corrosion. To use, shake can vigorously for one minute, after mixing ball begins to rattle, spray product on rusted part liberally and allow to soak. Repeat process if rust or corrosion is severe. Summit Racing™ penetrant spray contains graphite and other lubricants to assist in quicker, safer removal of threaded nuts/bolts and rusted parts.
( 4 )
$7.99
Permatex medium strength blue threadlocker is OEM specified. Blue is an all-purpose threadlocker ideal for all nut and bolt applications of 1/4 in. to 3/4 in., eliminating the need for stocking expensive lock nuts and lock washers. It locks and seals while preventing parts from loosening due to vibration, and it protects threads from corrosion, can be removed with hand tools for easy disassembly, and conforms to ASTM D 5363 AN0321 standards. Permatex medium strength blue threadlocker is offered in several sizes and available in a gel formula that provides "liquid-reliability" without drips, globs, mess, or waste.
( 11 )
$1.50
—
$6.99
Permatex OPTIMUM BLACK gasket maker is specially formulated for high flexibility and maximum oil resistance. Today, we see components changing and unlike materials meeting (plastic/steel, aluminum/steel, etc.), all with different rates of expansion and contraction. Also, with technology advancing, regulations, and requirements tightening, we see thinner metals, fewer fasteners, and wider spread bolt patterns. The strength and flexibility of OPTIMUM BLACK RTV silicone gasket maker handles the changes and added stresses that exist between today's lightweight, high performance, and premium component assemblies. Features include: * High flexibility: assemblies where dissimilar metal meet * Sensor safe, low odor, and non-corrosive * Resistance to oil, shop fluids, and vibration * Extra nozzle is included adding convenience, eliminating the hassle of a clogged nozzle, and allowing multiple uses of each tube, without loss of product * Temperature range: -65 degrees F to 500 degrees F
( 4 )
$8.99
Permatex Nickel Anti-Seize lubricant protects metal parts from seizing and galling at temperatures up to 2,400 degrees F. Copper-free, use under conditions of extreme pressure and temperature, and with stainless steel, titanium, and nickel alloys. This lubricant is great for exhaust manifold bolts, exhaust system bolts, muffler clamps, and tailpipe assemblies.
( 16 )
$4.99
Lucas Penetrating Oil loosens rusted-on nuts and bolts, finding its way into the tiniest of crevasses between metal parts and lubricating them. This penetrating oil is fortified with powerful corrosion inhibitors and wetting agents that ensure protection to parts exposed to the elements. Evaporation is slow, leaving a tenacious film that fights water and corrosion. The aerosol can be used on bolts, hinges, sliding doors, bearings, bicycle chains, and a hundred other uses around the garage, shop, office, or home! Equipped with a locking pop-up tube and 360 degree applicator for precision application, Lucas Penetrating Oil goes where you want it to—and you never lose the applicator straw! Key features and benefits include: * A truly superior penetrant designed to dissolve corrosion and rust without drying * Provides a microscopic film that rust-proofs for up to a year indoors and outdoors * Aerosol can of penetrating oil can be used in any position—even upside down! * Excellent protection against water (even salt water) * Fortified with anti-seize agents * Low odor * Stops annoying squeaks on hinges, doors, etc.
( 2 )
$8.99
Loctite Copper anti-seize sticks provide a shield against high-temperature seizing and galling. Studs, bolts, flanges, and other mated parts can be easily removed in typical dry service temperatures up to 1,800 degrees F (982 degrees C). The copper anti-seize sticks can be used on copper, brass, cast iron, all steel alloys including stainless steel, all plastics, and all non-metallic gasketing materials. Suggested applications include: * Spark plug threads installed in aluminum * Exhaust manifold bolts * Engine bolts * Thermostat housing bolts * Oxygen sensors * Battery cable connections
Not Yet Reviewed
$10.99
OEM-specified Permatex high-temperature sleeve retainer compound is an anaerobic adhesive that secures slip and press-fit assemblies, adding up to 3,000 psi holding power. It's great for restoring worn or out-of-tolerance assemblies. You'll also find this adhesive useful on retaining bushings, cup plugs, gears, dowel pins, oil seals, ring gear bolts, idler shafts, and press-fit bearings. Order the tube or bottle volume needed for your application.
Not Yet Reviewed
$8.99
Loctite Silver anti-seize sticks are heavy-duty, temperature-resistant, petroleum-based lubricant compounds fortified with graphite and metallic flake. The lubricant will not evaporate or harden in extreme cold or heat. Use them during assembly to prevent seizing, galling, and corrosion up to 1,600 degrees F (871 degrees C). Suggested applications include spark plugs, cylinder head bolts, and exhaust head bolts.
Not Yet Reviewed
$9.99
Permatex low-strength purple threadlocker is an OEM-specified solution for proper thread engagement. This low-strength threadlocker works on fasteners under 1/4 in. that require occasional adjustment. Permatex low-strength purple threadlocker is non-corrosive and leaves your screws and bolts removable with hand tools for easy disassembly when needed.
Not Yet Reviewed
$7.99
Lucas Extreme Duty Gun Oil is a special blend of oil and petroleum-extracted additives—producing a lubrication specially formulated for high volume, high heat, and friction firearms. It is designed for semi-auto rifles, shotguns, and pistols, as well as full auto firearms and suppressors. The oil offers superior burn-off resistance. Its polymeric film protects metal from rust and moisture—and dramatically reduces wear during all shooting conditions. Applying Lucas Extreme Duty Gun Oil to bores, bolt carriers, and gas pistons makes clean-up of powder residue, copper, and carbon fouling a much easier task. It neutralizes acids from fingerprints and resists drying for long-term storage use. Lucas Extreme Duty Gun Oil is great for lubrication on all high-heat, high-use firearms. It is sold in a variety of sizes and quantities.
( 2 )
$7.99
—
$10.99
Remember to lube the threads before torquing your rod bolts. Howards Cams MSA moly lube is specially formulated for your aerospace-quality rod bolt assembly to ensure proper torque and stretch readings. Do it right and use the lube--Howards Cams aerospace moly lube.
Not Yet Reviewed
$1.99
Liqui Moly GUNTEC Gun Grease is a very cohesive specialty grease with special ceramic lubricants for ultimate performance and safe operation of your firearms. Ceramic lubricants provide minimal friction and reduced wear for maximum reliability, even in critical situations or in extreme temperatures. It safeguards corrosion protection on all metal surfaces. Use Liqui Moly GUNTEC Gun Grease when lubricating handguns, rifles, and shotguns, and on various weapon components. It is highly recommended for metal-plastic, plastic-plastic, and metal-metal friction pairings, such as polymer handgun slides and rifle bolt actions. Benefits: * Excellent wear resistance * Extremely low friction * Wide operating temperature range * Outstanding corrosion protection * Very compatible with plastics * Waterproof * Does not contain resins or acids * High-strength adhesion * Long-term stability
( 1 )
$12.99
Permatex Fast Break super penetrant lubricant will free rusted and frozen parts in all types of assemblies. Locked-up bolts, nuts, and fittings will no longer be a problem as this specially formulated super penetrant quickly and effectively loosens rust, tar, grease, carbon deposits, dirt, gum, and corrosion from metal parts. Save your knuckles (and a replacement purchase) with Permatex Fast Break super penetrant lubricant!
Not Yet Reviewed
$9.99
Summit Racing™ Extreme Duty fastener lubricant is a heavy-duty, multi-purpose, extreme pressure lubricant and anti-seize compound. Formulated with a balanced blend of petroleum base grease, lubricating solids, anti-galling agents, and rust and oxidation inhibitors, it will reduce, seizing, galling, fretting, wear, and rust and corrosion on metal surfaces for the life of the lubricant. When used with bolts, it creates greater uniformity in clamp load for the same torque compared to an unlubricated bolt. For use on: * Nuts, bolts, studs, washers, and screws * Sensors * Sprockets and chains * Forging dies * Splines and gears * Keyways and shafts * Brake cams and pins * Spark plugs
Not Yet Reviewed
$1.99
PRW Vibra-TITE medium-strength threadlockers stop fasteners from loosening due to extreme shock and vibration. They also work on fasteners of any shape or size, from tiny hex set screws to harmonic balancer bolts. Fasteners are easily adjusted, removed, and reused.
Not Yet Reviewed
$2.40
Permatex high-temperature red threadlocker is OEM specified. It is a high-temperature, high-strength threadlocker for heavy-duty applications and prevents bolts and press fits 3/8 in. to 1 1/2 in. from loosening due to shock, severe vibration, and heat stress. It's exclusively formulated for newer engines and high performance applications that require extreme temperature resistance. Permatex high-temperature red threadlocker is suited for temperatures up to 450 degrees F and is removable with heat and hand tools.
( 1 )
$9.99
Permatex ScrewGlue Locks gel secures and increases the holding power of metal nuts, bolts, and screws during assembly of everyday items around the home. Use it on items inside and outside the home to ensure a tight connection that won't loosen overtime due to vibration or frequent use. ScrewGlue also prevents weather-related corrosion of threads. Uses for Permatex ScrewGlue Locks gel: * New cabinet hardware * New furniture assembly * Outdoor play and swing sets * BBQ grill assembly * Outdoor hardware * Metal shelving assembly * New tool and hardware assembly
Not Yet Reviewed
$6.99
Mobil 1 Synthetic LV ATF HP is an advanced full synthetic automatic transmission fluid formulated from synthetic base oils and an advanced additive system. It is approved and licensed by General Motors against DEXRON HP ATF. This high performance synthetic formulation delivers extended transmission life with its improved oxidation and thermal stability. LV ATF HP has frictional properties that provide smooth gear shifting during all operating conditions. The inherently high viscosity index and stability of Mobil 1 Synthetic LV ATF HP helps to protect against thermal breakdown at high operating temperatures—while still providing outstanding performance at extremely low ambient temperatures.
( 27 )
$9.99
Summit Bucks
ACDelco DEXRON ULV automatic transmission fluid is an ultra-low viscosity and fully synthetic formula designed for 10-speed transmissions. This lubricant helps buffer transmission shudder and vibrations, while high performance additives optimize gear shifting. ACDelco DEXRON ULV automatic transmission fluid is blended to enhance the performance and longevity of key automotive parts.
( 7 )
$6.99
Summit Bucks
Don't shortchange yourself when it comes to stopping power. If your disc or drum brakes require DOT 3 GMW brake and clutch fluid, you can count on ACDelco. These fluids are subjected to very high temperatures, and ACDelco has a higher boiling point to prevent vaporizing in the lines and resist corrosion for the longevity of your braking and clutch systems.
( 20 )
$6.99
—
$7.99
Brake Fluid DOT 4 by Liqui Moly is a synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. It also provides a higher wet and dry boiling point which guarantees full function even during extreme conditions, plus unique inhibitors provide corrosion and oxidation protection at high temperatures. Additionally, Liqui Moly brake fluid DOT 4 contains special scavengers that suppress steam at increased moisture levels.
Not Yet Reviewed
$7.99
—
$10.99
Modal Header