Availability
Because of frictional inconsistencies with oil, moly, and other lubricants, it takes multiple cycles of torquing the bolt, loosening it, and tightening it again to obtain the required preload or stretch. Typically, when a fastener is first tightened, friction is at its highest point and the preload value or stretch is low. As the fastener is cycled numerous times the friction decreases and the preload increases. This phenomenon is called "preload scatter." With ARP Ultra Torque assembly lubricant, a fastener need only be torqued once to get within 5 percent of ideal preload, and it remains consistent through all subsequent cycles (from race-prep machining through final assembly). Moreover, given the inconsistencies of ordinary lubes, it's quite possible for adjacent head bolts or studs to have vastly different preloads. This scatter causes bore distortion, hampers piston ring seal, and leads to poor head gasket sealing. Order the tube or container size needed for your applications.
( 297 )
$28.99
Permatex Ultra Grey RTV silicone gasket maker is perfect for valve covers, oil pans, intake manifold end seals, timing covers, transmission pans, water pumps, and thermostat housings. It's sensor-safe, non-corrosive, and has outstanding oil-resistance and joint movement tolerance. At eight times more flexible than conventional gaskets, you'll be sure to get a leak-free seal.
( 32 )
$27.99
Whether from the everyday demands of the road, racing or just hard driving, without the right protection, your car will lack efficiency, wear down faster and underperform. PennGrade 1 "The Original Green Oil" has been endorsed for decades by racers, engine builders, and manufacturers. Their Synthetic Blend High Performance motor oil offers tenacious cling-ability and enhanced levels of zinc and phosphorous chemistry to give your hard-working engine the protection it demands. Choose the viscosity needed for your engine. Features and benefits: * Film strength/protection under demanding torque * Anti-foaming, stability, and high-temperature protection * Detergent/dispersant additives for engine cleanliness
( 172 )
$35.99
—
$38.99
VP Racing Stay Frosty Race-Ready coolant is formulated for high-compression, high-heat racing engines. It contains a specialized blend of wetting agents that drastically improve the coolant's ability to transfer heat away from high-temperature cylinder heads. Temperatures of engines are reduced by up to 30 degrees F, compared to conventional glycol-based coolant. This increases the density of the air/fuel mix, and allows ignition timing to be safely advanced without the threat of detonation—resulting in more power and torque. Product features: * Ready-to-use—just pour it in * Contains no slippery/hazardous glycol * Reduces engine temperatures by up to 30 degrees F * 100 percent water-based formula * Maximizes horsepower and torque * No-freeze protection for maximum cooling * Non-toxic and biodegradable * Blended with chemically stable reverse osmosis water
( 8 )
$24.26
—
$35.96
VP Racing Stay Frosty Hi-Performance coolant is formulated for high performance motorcycle engines that require additional protection from overheating and minimal freeze protection. It contains a specialized blend of wetting agents and propylene glycol that improve the coolant's ability to transfer heat away from high-temperature cylinder heads. Operating temperatures of engines are reduced by up to 14 degrees F, compared to conventional glycol-based coolant. This increases the density of the air/fuel mix and allows ignition timing to be safely advanced without the threat of detonation--resulting in more power and torque. Product features: * Ready-to-use premix high performance engine coolant * Contains wetting agents for better cooling * Non-toxic propylene glycol freeze protection * Reduces cylinder head temperatures by up to 14 degrees F * Maximizes horsepower and torque * Protects all metals from corrosion/electrolysis, including aluminum * Prevents scales/deposits that reduce heat transfer
( 4 )
$25.16
—
$42.75
PennGrade 1 high performance motor oil is specially formulated using high-quality, premium base stocks and select additive technologies to meet stringent lubricating demands of high performance, highly stressed street and racing engines. It delivers excellent shock load and high temperature protection to heavily stressed engine parts, including bearings, camshafts, rings, and pistons. PennGrade 1 high performance motor oil reduces internal friction for increased horsepower output, while maintaining strong lubricating film protection--even under the most demanding torque and extreme temperature conditions. The high performance blend also possesses good anti-foaming and shear stability characteristics, excellent high-temperature protection from thermal breakdown, outstanding film strength, and strong anti-wear properties. Select the oil weight and quantity you need.
( 27 )
$37.99
ProCharger introduced the industry's first line of gear-driven superchargers with a self-contained lubrication system—and the cooler operation has produced astounding horsepower and torque gains. This premium synthetic supercharger oil is formulated specifically for high-speed applications, and is essential to maintain internal bearings and gears, as well as to keep your ProCharger warranty in force. For most superchargers, an oil change is recommended after the initial break-in (500 miles automotive, or 15 hours marine), and then at scheduled intervals. Consult the instructions for frequency and oil volume needed to service each unit. ProCharger supercharger oil is available in single bottles or multi-packs.
( 38 )
$26.00
—
$49.00
Jet-Lube SS-30 Pure Copper Anti-Seize will literally “copper plate” mating and sliding surfaces to protect against seizure, galling, and heat freeze. This non-melting, non-volatile base grease contains a high content of micro-size copper flakes that prevent metal-to-metal contact. It also maintains lubrication qualities under wide variations of temperature, expansion, contraction, and cyclic loadings. The compound contains no lead or graphite, does not require mixing, and will not separate, settle out, harden, or dry out in storage. SS-30 is fortified with antioxidants and corrosion inhibitors—and has many uses: taps, lugs, wiping contacts, drum switches, slip rings, and more. Multiple container sizes are available. Additional Jet-Lube notes: * Environmentally-preferred anti-seize thread lubricant and conductive termination compound * Contains high concentration of copper flakes, required for heavy loads or compression * Controlled frictional characteristics allow surfaces of the nut and bolt to be torqued correctly * Assures full hydraulic efficiency, allowing metal surfaces to slide over each other without contact * Works as a similar and dissimilar metal between two metal surfaces to prevent seizing * Will not melt in high temperatures; improves conductivity and continuity
( 12 )
$33.99
—
$43.99
Torco RTF Racing Transmission Fluid is specifically engineered to reduce fluid drag for increased power efficiency without compromising component durability. It is made from a combination of specially selected 100 percent synthetic Group IV/V base oils proving superior shear resistance and extreme temperature stability. Torco RTF is specially formulated to exceed the load-carrying and extreme pressure wear protection properties of higher viscosity GL-5 or GL-6 gear oils. It provides anti-score protection for high-speed, high-load, and high-torque shock-loading conditions, while allowing for the smooth operation of synchronizers.
( 8 )
$39.99
Summit Racing™ Hi-Performance Synthetic ATF is a full synthetic fluid designed for all cars, trucks, and performance applications that require a fully formulated low viscosity ATF. Blended with performance vehicles in mind, it provides exceptional performance and protection while improving shift quality and feel, preventing and eliminating torque converter shudder, and it imparts excellent torque carrying capacity which extends clutch, band, and component life. Available in different sizes and quantities, select the amount(s) of automatic transmission fluid to best suit your needs. Check out these features and benefits: * World class replacement for synthetic low viscosity ATF. Check out our full compatibility listing below. * Backward compatible to replace DEXRON fluids in older automatic transmissions that call for DEXRON, as well as Honda applications that call for Z-1 ATF * Seal and O-ring friendly technology restores seal flexibility and performance to older and high mileage transmissions. * Formulated to meet OEM requirements for superior shift quality and anti-shudder properties. * Unique technology provides excellent wear protection with improved frictional and shear stability (high film strength for the life of the fluid). * Suitable for use with dozens of different ATFs
( 1 )
$42.99
Driven Racing Oil GP-1 Gear Oil is designed to deliver maximum performance and protection. GP-1 Gear oil contains extreme pressure additive package with anti-foaming agents. It is specially formulated from premium Pennsylvania base oils and provides natural film strength, tack, and tenacious cling without relying on polymers that eventually shear, causing viscosity loss. The oils shear-resistant formulation protects high offset ring and pinion gears from shock loading during motorsports racing. It also protects slower speed, high torque off-road differentials. Driven Racing Oil GP-1 gear oil quick list features and benefits: * High performance gear oil * Limited slip formula to deliver maximum wear protection * Shear-resistant for maximum protection * Extreme shock-load protection * Foam-resistant additive package * Tenacious cling and metal wetting
( 1 )
$20.59
Maxima RS full synthetic oil is a 100 percent synthetic, triple ester-based race-grade oil. This industry-leading lubricant offers the ultimate in engine performance and protection. The technologically advanced formula contains special anti-wear/extreme pressure additives to protect critical engine components from heavy loads and peak temps generated by high performance engines. RS is a regenerative, high-viscosity index, synthetic polymer system that resists mechanical breakdown and viscosity loss. It also delivers increased horsepower and torque, superior engine cleanliness; reduces wear on bearings, cams, lifters, and crankshafts—and extends engine life. Maxima RS full synthetic oil is created for world-class racers who are bold enough to challenge the very limits of possibility!
( 10 )
$20.99
Valvoline daily protection gear oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that help protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions. Meets or exceeds API Services GL-5 and non-synchronized manual transmissions calling for GL-4.
( 32 )
$28.99
Kano Labs Kroil Original Penetrants, (formerly known as AeroKroil), is an industrial-strength penetrating oil formulated to quickly penetrate deep into small crevices. Kroil attacks rust and corrosion to help loosen frozen or seized metal fasteners such as nuts, bolts, screws, studs, hinges, tools, pulleys, chains, or valves. Safe on all metals, it is ideal for stuck parts on cars, trucks, ATVs, fleet, farm and agriculture engines and equipment. Kroil cleans, displaces water, and helps prevents rust. Its easy application makes even the toughest maintenance jobs easier, faster, and simpler. When stuck on a job or project, use Kano Labs Kroil Original penetrants. They'll get the job done fast and easily the first time! Since 1939, Kano Labs has been an industry-leading producer of penetrating oils, lubricants, and chemical specialty products, and has been used and trusted by industrial and trades professionals and DIYers. Product features and benefits: * Kroil Original Penetrating Oil (formerly Aerokroil) from Kano Laboratories has a strong reputation among professionals as the trusted penetrating oil for any industry *Available in 8 oz. squeeze bottle, 10 oz. or 16.5 oz. aerosol can, or 1 gallon jug (please specify container size needed when placing order) * Tight spaces are no problem—Kroil penetrates small openings, threads, and crevices * Simplifies repairs and magnifies muscles—any additional leverage helps since Kroil loosens tough rusted parts fast and requires less torque to loosen seized nuts and bolts—now that's leverage! * Deters corrosion, removes rust, and carbon deposits—corrosion meets its match, as Kroil removes and prevents rust, cleans carbon deposits and penetrates rusty parts, it also displaces moisture, humidity, and salt water, which makes it perfect for wet, humid environments
( 2 )
$24.52
—
$34.26
Torco SR-5r 100 Percent synthetic racing oil is engineered to protect engines under severe racing conditions and offers the highest level of performance and engine protection. It features a combination of Group IV and Group V base stock technology, along with Torco's exclusive race-proven additive chemistry, MPZ. It provides excellent anti-wear and anti-friction of vital engine components, including bearings, cams, cylinders, pistons, rings, and valvetrain parts by minimizing frictional losses to deliver more horsepower and torque output. Torco SR-5r 100 percent synthetic racing oil is formulated to Torco's proprietary race-specific additive technology.
( 1 )
$21.79
—
$27.99
Most modern transmission fluids have a few things in common: better heat and oxidation resistance, better shear stability so that the fluid doesn't lose viscosity over time, and a lower coefficient of friction needed for locking torque converters on modern cars. Lucas Multi-Vehicle ATF satisfies all these requirements; however, many cars and pickup trucks now use ATF that has a lower viscosity than traditional fluid, providing marginally better fuel economy. Lucas Oil Low Viscosity Synthetic Multi-Vehicle automatic transmission fluid is blended from premium API Group III synthetic base oils, combined with shear-stable viscosity modifiers and a high-quality additive package that includes anti-wear, anti-oxidants and corrosion inhibitors. * Primary Application: Recommended by Lucas Oil for any automatic transmission application where the vehicle owner's manual specifies a low viscosity fluid, either foreign or domestic, such as: Dexron VI, Mercon LV (& SP), Honda DW-1, Nissan Matic S (and W), Mitsubishi Dia Queen ATF J-3 and ATF-PA and many more.
( 5 )
$34.99
—
$47.59
Klotz Synthetic Nitro power additive is a top-treat fuel additive designed to extract maximum horsepower from stock and modified racing engines. Klotz Nitro increases fuel oxygen levels and is particularly effective at optimizing torque at low and mid RPMs. Klotz Nitro is suitable for use in both two-stroke and four-stroke racing engines and will blend with gasoline and alcohol. An increase in carburetor jetting or timing adjustments may be needed when using this product. Klotz Nitro is designed for dedicated racecars and is not intended for on-highway use. This product may not be legal in certain sanctioned motorsports events.
( 10 )
$22.50
Permatex The Right Stuff 1 Minute Gasket Gray gasket maker is specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). Sensor-safe, the Right Stuff Gray seals instantly, forming a reliable, long-lasting elastomeric rubber gasket that outperforms pre-cut gaskets. This product is blowout-resistant, allowing leak-proof gaskets to be made and put into service in just one minute. No wonder this premier instant Permatex gray gasket maker is considered the Right Stuff! Features, specs, and benefits include: * Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant, and ATF) * Allows you to make leak-proof gaskets to custom fit any shape or size for various applications quickly and easily * Operates in environments to 450 degrees F (232 degrees C) continuous; 500 degrees F (260 degrees C) intermittent * Returns equipment to service faster * Suggested applications: automotive gaskets, valve covers, oil and transmission pans, thermostat housings, water pumps, etc.
( 1 )
$23.99
—
$37.99
Permatex OPTIMUM GREY gasket maker is specially formulated to withstand high vibration and temperatures up to 700 degrees F. It is designed for high performance and high-temperature applications common in import and late model engines and component upgrades. Along with many of features, Permatex OPTIMUM GREY one of the most versatile gasket makers available. Features include: * Maximum torque load resistance * Sensor safe, low odor, and non-corrosive * Resistance to oil, shop fluids, and vibration * Extra nozzle is included adding convenience, eliminating the hassle of a clogged nozzle, and allowing multiple uses of each tube, without loss of product * Temperature range: -65 degrees F to 700 degrees F
( 4 )
$32.99
Lucas hydrostatic transmission fluid is especially formulated to withstand the unique demands of hydrostatic transmissions in zero-turn, stand-on or ride-on mowers. Hydrostatic drive is what makes this possible; the ability to apply variable torque to the left or right wheel. These systems require a versatile and robust hydraulic system and thus, an equally robust hydrostatic drive fluid. This SAE 20W-50 multi-grade viscosity oil is perfect for Zero turn mowers. It provides excellent protection against all lubricated parts, has added detergency, dispersancy, and rust protection over motor oils, that are sometimes used in this application, and will not shear thin over time. Additionally, Lucas synthetic blend hydrostatic drive fluid contains a seal conditioner to discourage leaks, so the fluid stays in the mower, not on the grass. Together, these attributes result in a long-life fluid that truly holds up over time and helps to extend equipment life. Key benefits: * Premium anti-wear protection * Corrosion protection * Resists oxidation * Added dispersancy and detergency for clean internal parts * Made with synthetic and premium base oil * Improves equipment life and reliability * Recommended for all hydrostatic drive systems where the manufacturer recommends SAE 20W-50 fluid * Not recommended for engine crankcase
Not Yet Reviewed
$44.99
Valvoline 4-Stroke ATV motor oil is specially-formulated to provide peak ATV performance and protection. The thermally-stable formula maintains proper lubrication to protect engines under extreme conditions. It offers optimal frictional characteristics for high torque, smooth shifting, corrosion-resistance, and proper protection of the wet clutch; advanced additives help protect against water, deposits, and other corrosive materials to keep engines clean. Valvoline 4-Stroke ATV motor oil provides proper additive balance for maximum horsepower with minimal wear; while increased anti-wear agents minimize wear from metal-to-metal contact, and shear stable viscosity improvers better resist oil film breakdown.
Not Yet Reviewed
$43.99
Optimized for use with the MX FUEL Pipe Threading Machine, the Milwaukee Dark Thread Cutting Oil cools newly cut threads, reduces friction, and extends the life of dies and keeps machines running longer. Features and benefits: * Formulated for Milwaukee's MX FUEL Pipe Threading Machine—also can be used in other threading machines and with Milwaukee Portable Threaders * Reduces torque needed to create threads * Cools newly cut threads and improves thread quality * One gallon capacity
Not Yet Reviewed
$49.99
Motorex Racing Shock Oil has been specially developed for shock absorber systems with the highest demands. It is formulated with 3-D response technology for optimal low friction damping at all temperatures. This enables the absorber settings and the Motorex Racing Shock Oil to work in perfect harmony, giving the driver optimum feedback from the chassis, both on and off the roads. This product is designed for use in modern fork systems and available in various weights for all applications. Product features and advantages: * Fade-free formula withstands high thermal loads * Optimum reduction in the coefficient of friction * Improved initial breakaway torque (stick-slip) * Specially developed for high thermal loads * Minimal formation of foam * Optimum air release for a very quick process
Not Yet Reviewed
$23.99
Maxima Oil SYN ATF is specifically formulated to perform in racing transmissions under high-torque, high-horsepower conditions. The fully synthetic formula with technologically advanced anti-wear and extreme pressure additives protects the automatic transmission in high-stress environments. Advanced anti-foam agents minimize air entrapment in the oil and protect critical transmission components at higher speeds seen in racing conditions. Maxima Oil SYN ATF exhibits excellent wetting properties enabling increased heat transfer and lowering overall operating temperatures. Superior additive package is oxidative and thermally stable--inhibiting the formation of lacquer, varnish, and harmful deposits--ensuring clean, trouble-free operation. No-slip formula offers positive shift engagement and reduces clutch drag. Special additives help to minimize clutch burn-in time, aiding in the overall reduction of operating temperatures. Ideal frictional properties help to eliminate wear, while providing smooth, positive shifts in high-stress, high-load environments.
( 1 )
$24.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
