Availability
Richmond Gear has created sealant kits to help make ring and pinion gear installation easier. These kits include silicone rubber sealant, thread locker, and gear marking compound with a brush. Everything you need to button-up your gear installation.
( 8 )
$11.99
Because of frictional inconsistencies with oil, moly, and other lubricants, it takes multiple cycles of torquing the bolt, loosening it, and tightening it again to obtain the required preload or stretch. Typically, when a fastener is first tightened, friction is at its highest point and the preload value or stretch is low. As the fastener is cycled numerous times the friction decreases and the preload increases. This phenomenon is called "preload scatter." With ARP Ultra Torque assembly lubricant, a fastener need only be torqued once to get within 5 percent of ideal preload, and it remains consistent through all subsequent cycles (from race-prep machining through final assembly). Moreover, given the inconsistencies of ordinary lubes, it's quite possible for adjacent head bolts or studs to have vastly different preloads. This scatter causes bore distortion, hampers piston ring seal, and leads to poor head gasket sealing. Order the tube or container size needed for your applications.
( 297 )
$18.99
Permatex high performance thread sealant is formulated specifically for tapered metal pipe thread fittings—and works great as a replacement for PTFE tape and pipe dopes. It cures rapidly to withstand up to 10,000 psi, prevents galling, and protects mated threaded areas from rust and corrosion. Features of Permatex high performance thread sealant: * Contains PTFE * OEM-specified * Standard applications: stainless steel fittings, head bolts into through holes, oil psi sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings * Motorcycle applications: timing hole plug and oil hose fittings * Heavy-duty applications include drain plugs, all tapered fittings
( 9 )
$14.99
Permatex copper anti-seize lubricant is a premium-quality dressing that may be used to prevent seizing, corrosion, and galling where high-temperature conditions exist. This product contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier—and is fortified with high-quality rust and corrosion inhibitors. It also provides good electrical conductivity. Suggested applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, and fuel filter fittings. Copper anti-seize lube features a brush-top applicator for easy application, and is available in multiple sizes.
( 8 )
$14.99
Royal Purple Maxfilm synthetic penetrating lubricant is a high film strength, multipurpose lubricant that deeply penetrates, cleans, and loosens rusted parts. Once applied, its solvent carrier evaporates, leaving a tough lubricating film on all metal surfaces and providing long-lasting protection against wear, rust, and corrosion. Royal Purple Maxfilm synthetic penetrating lubricant is designed for loosening parts such as nuts, bolts, locks, and hinges, lubricating power tools, and preserving and protecting parts in storage. Get Royal Purple Maxfilm synthetic penetrating lubricant for superior wear protection.
( 12 )
$11.99
Schaeffer's Penetro 90 is a high performance penetrating oil that lubricates all types of moving parts that have become difficult to operate. It is oil-based and blended from Schaeffer's patented formula of penetrating oils, synthetic isoparaffinic hydrocarbons, special friction releasing and extreme pressure additives, and three different types of rust and corrosion inhibitors. This unique blend allows Penetro 90 to penetrate deep into the pores of metals, and cover surfaces with a light, clear lubricating film with lasting staying power. When sprayed onto rusty bolts, it coats each rust particle and acts like tiny ball bearings, allowing the rust particles to easily slide over each other. Performance benefits: * Prevents thread stripping, busts through rust * Projects against corrosion, rust, and abrasive particles * Triples the life of hoist chains and sprockets * Doesn't affect seal materials or coatings * Greatly reduces friction and wear * Protects against moisture and moisture buildup * Superior extreme pressure and anti-wear properties * Lasting performance in saltwater environments
Not Yet Reviewed
$14.77
Loctite Blue medium-strength anaerobic threadlocker sticks offer the same locking strength and sealing capabilities as Loctite Threadlocker 242 traditional threadlocking liquid. These wax-like sticks are conveniently packaged in self-feeding stick applicators. Well suited for difficult repairs, as in overhead applications, they can be applied to a part even if assembly is to take place at a later time, making the sticks ideal for volume assembly. Threadlocker sticks are removable with hand tools. Suggested applications include: * Valve cover bolts * Water pump bolts * Oil pan bolts * Driveshaft bolts * Rocker arm adjustment fasteners
Not Yet Reviewed
$13.99
Red Line assembly lube is designed to be applied to potential wear surfaces before assembly, in order to prevent metal contact upon startup before adequate lubrication is supplied. Red Line assembly lube will mix with the oils and not plug filters. Use it on all lubricated parts, such as cams, followers, pistons, bearings, and bolt threads. Only a small amount is needed on bearing and piston surfaces--too much can make it difficult to turn over the engine. Red Line assembly lube is an excellent corrosion-inhibitor and can be used on machined surfaces to provide long-term corrosion protection. Do not use this lubricant on exhaust bolts or other high-temperature bolts which require an anti-seize.
( 6 )
$17.99
Permatex anti-seize lubricant is designed to be used during assembly to prevent galling, corrosion, and seizing and to ensure easier disassembly. It works great for removing spark plugs, cylinder heads, and exhaust head bolts. Other product features include: * Temperature range: -60 to 1,600 degrees Fahrenheit * Salt, corrosion, and moisture-resistant * Ideal for marine use
( 52 )
$11.99
—
$18.99
Permatex medium strength blue threadlocker is OEM specified. Blue is an all-purpose threadlocker ideal for all nut and bolt applications of 1/4 in. to 3/4 in., eliminating the need for stocking expensive lock nuts and lock washers. It locks and seals while preventing parts from loosening due to vibration, and it protects threads from corrosion, can be removed with hand tools for easy disassembly, and conforms to ASTM D 5363 AN0321 standards. Permatex medium strength blue threadlocker is offered in several sizes and available in a gel formula that provides "liquid-reliability" without drips, globs, mess, or waste.
( 11 )
$10.99
—
$20.99
Rock Jock's premium quality, long-lasting Johnny Joint grease has be proven in competition and recreational vehicles over the last 15-plus years. Non-moly greases eventually dry up and cause squeaking, friction, and component wear. Rock Jock uses moly grease for maximum longevity and smooth, quiet operation of components. The grease is a high moly-based petroleum lubrication that's specially formulated to reduce friction and increase performance. It also extends the life of Johnny Joint rod ends as well as all of Rock Jock's steering system rod ends and anything greased via greasable bolts, such as heavy-duty leaf spring shackles. Applicable To: * Johnny Joint rod ends, all styles * Currectlync steering tie rod ends, all styles * Greasable bolts—included with control arms or Rock Jock greasable shackles * Includes: One 14 oz. tube of grease * Notes: Fits in a standard grease gun
Not Yet Reviewed
$11.00
Loctite Copper anti-seize sticks provide a shield against high-temperature seizing and galling. Studs, bolts, flanges, and other mated parts can be easily removed in typical dry service temperatures up to 1,800 degrees F (982 degrees C). The copper anti-seize sticks can be used on copper, brass, cast iron, all steel alloys including stainless steel, all plastics, and all non-metallic gasketing materials. Suggested applications include: * Spark plug threads installed in aluminum * Exhaust manifold bolts * Engine bolts * Thermostat housing bolts * Oxygen sensors * Battery cable connections
Not Yet Reviewed
$10.99
Loctite Copper anti-seize provides a shield against high-temperature seizing and galling. Studs, bolts, flanges, and other mated parts can be easily removed in typical dry service temperatures up to 1,800 degrees F (982 degrees C). Copper anti-seize can be used on copper, brass, cast iron, all steel alloys including stainless steel, all plastics, and all non-metallic gasketing materials.
Not Yet Reviewed
$14.99
Summit Racing™ Extreme Duty fastener lubricant is a heavy-duty, multi-purpose, extreme pressure lubricant and anti-seize compound. Formulated with a balanced blend of petroleum base grease, lubricating solids, anti-galling agents, and rust and oxidation inhibitors, it will reduce, seizing, galling, fretting, wear, and rust and corrosion on metal surfaces for the life of the lubricant. When used with bolts, it creates greater uniformity in clamp load for the same torque compared to an unlubricated bolt. For use on: * Nuts, bolts, studs, washers, and screws * Sensors * Sprockets and chains * Forging dies * Splines and gears * Keyways and shafts * Brake cams and pins * Spark plugs
Not Yet Reviewed
$17.99
WD-40 Specialist Rust Release Penetrant Spray gets deep into crevices, threads, and seams to break the bonds that hold stuck parts together. The formula features Blu Torch Technology--a proprietary blend of synthetic additives that goes to work quickly on rusted nuts, bolts, threads, locks, and chains leaving behind a protective layer that helps prevent rust and corrosion from reforming. WD-40 Specialist Rust Release Penetrant Spray s 50-state VOC-compliant and safe to use on plastics, rubber and metal.
( 4 )
$15.99
Loctite PST thread sealant sticks are single component, semi-solid anaerobic pipe sealant compounds. The self-feeding applicator sticks facilitate application of the material where a conventional liquid or paste would be difficult to use. Loctite PST sticks cure rapidly to provide immediate low-pressure sealing. The controlled lubricity prevents galling, protects threaded areas from rust and corrosion, and provides easy disassembly. Loctite PST thread sealant sticks are recommended for sealing metal tapered pipe threads and fittings in automotive applications. Suggested applications include: * Stainless steel fittings * Oil and coolant lines * Fuel fittings * Rear axle fill plug * Intake manifold switches * Head bolts into through holes
Not Yet Reviewed
$14.99
Loctite 565 Thread Sealant is a white to off-white, one-part, low strength, high viscosity, anaerobically cured, methacrylate ester, acrylic thread sealant designed for the locking and sealing of metal pipes and fittings. This product cures when confined in the absence of air between close fitting metal surfaces—and prevents loosening and leakage from shock and vibration. Additional details: * Controlled strength sealant is formulated specifically for metal, tapered pipe thread fittings * Replaces most tapes and pipe dopes * Cures rapidly to withstand 10,000 psi * Perfect as a replacement for pre-coated parts * Prevents galling and protects mated threaded areas from rust and corrosion * OEM specified * Automotive equivalent to Loctite Industrial Part 56531 * Typical applications: Stainless steel fittings, head bolts into through holes, oil PSI sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings
Not Yet Reviewed
$15.99
Kano Labs Kroil Original Penetrants, (formerly known as AeroKroil), is an industrial-strength penetrating oil formulated to quickly penetrate deep into small crevices. Kroil attacks rust and corrosion to help loosen frozen or seized metal fasteners such as nuts, bolts, screws, studs, hinges, tools, pulleys, chains, or valves. Safe on all metals, it is ideal for stuck parts on cars, trucks, ATVs, fleet, farm and agriculture engines and equipment. Kroil cleans, displaces water, and helps prevents rust. Its easy application makes even the toughest maintenance jobs easier, faster, and simpler. When stuck on a job or project, use Kano Labs Kroil Original penetrants. They'll get the job done fast and easily the first time! Since 1939, Kano Labs has been an industry-leading producer of penetrating oils, lubricants, and chemical specialty products, and has been used and trusted by industrial and trades professionals and DIYers. Product features and benefits: * Kroil Original Penetrating Oil (formerly Aerokroil) from Kano Laboratories has a strong reputation among professionals as the trusted penetrating oil for any industry *Available in 8 oz. squeeze bottle, 10 oz. or 16.5 oz. aerosol can, or 1 gallon jug (please specify container size needed when placing order) * Tight spaces are no problem—Kroil penetrates small openings, threads, and crevices * Simplifies repairs and magnifies muscles—any additional leverage helps since Kroil loosens tough rusted parts fast and requires less torque to loosen seized nuts and bolts—now that's leverage! * Deters corrosion, removes rust, and carbon deposits—corrosion meets its match, as Kroil removes and prevents rust, cleans carbon deposits and penetrates rusty parts, it also displaces moisture, humidity, and salt water, which makes it perfect for wet, humid environments
( 2 )
$18.30
Permatex high-temperature red threadlocker is OEM specified. It is a high-temperature, high-strength threadlocker for heavy-duty applications and prevents bolts and press fits 3/8 in. to 1 1/2 in. from loosening due to shock, severe vibration, and heat stress. It's exclusively formulated for newer engines and high performance applications that require extreme temperature resistance. Permatex high-temperature red threadlocker is suited for temperatures up to 450 degrees F and is removable with heat and hand tools.
( 1 )
$11.99
Permatex Surface Insensitive threadlocker is an OEM-specified, medium/high-strength solution for general-purpose uses. This compound is well-suited for small fasteners that typically have a slight oil film. To help prevent loosening by vibration, order Permatex Surface Insensitive threadlocker—it's oil-resistant and allows for easy removal of screws and bolts with hand tools for easy disassembly.
( 1 )
$11.99
Hot Shot's Secret Never Rust Lubricant is a new multi-purpose, 100 percent synthetic spray lubricant that protects metal parts from rust and corrosion significantly longer than competitive brands. Formulated by Lubrication Specialties Inc., manufacturer of Hot Shot's Secret high performance oils and additives, Never Rust protects any metal surface up to 20 times longer than even top brands like WD-40. It is ideal for use on metal nuts and bolts, cables and chains, metal tools, automotive parts, door latches and hinges, locks, lawn equipment, and much more. Features and benefits: * Protects metal parts and blocks corrosion and rust for years of protection * Has excellent penetration qualities; will not gum, dry out, separate or bleed on equipment * Rust prevention spray prevents squeaks; ideal for preventive maintenance and use in extreme temperatures * Offers -65 degrees Fahrenheit to 300 degrees Fahrenheit operating range—quickly displaces moisture and removes grime and grease * Contains extreme-pressure anti-wear additives * Removes stickers, tape and labels and dissolves adhesives * Is compatible with most seals, except for EPDM rubber * Offers superior rust protection for up to two years
Not Yet Reviewed
$13.01
Clearance
Permatex large diameter red threadlocker is an OEM-specified, high-strength adhesive for use for locking and sealing larger bolts and studs 1 in. or greater in diameter. It's great for use on rocker arm studs, frame brackets, suspension fasteners, shock absorber mounts, wheel studs and more. This Permatex threadlocker also guards against vibration loosening. Heat may be required to weaken bond before parts can be disassembled.
Not Yet Reviewed
$24.99
$18.50
Liqui Moly GUNTEC Gun Grease is a very cohesive specialty grease with special ceramic lubricants for ultimate performance and safe operation of your firearms. Ceramic lubricants provide minimal friction and reduced wear for maximum reliability, even in critical situations or in extreme temperatures. It safeguards corrosion protection on all metal surfaces. Use Liqui Moly GUNTEC Gun Grease when lubricating handguns, rifles, and shotguns, and on various weapon components. It is highly recommended for metal-plastic, plastic-plastic, and metal-metal friction pairings, such as polymer handgun slides and rifle bolt actions. Benefits: * Excellent wear resistance * Extremely low friction * Wide operating temperature range * Outstanding corrosion protection * Very compatible with plastics * Waterproof * Does not contain resins or acids * High-strength adhesion * Long-term stability
( 1 )
$12.99
Lucas Extreme Duty Gun Oil is a special blend of oil and petroleum-extracted additives—producing a lubrication specially formulated for high volume, high heat, and friction firearms. It is designed for semi-auto rifles, shotguns, and pistols, as well as full auto firearms and suppressors. The oil offers superior burn-off resistance. Its polymeric film protects metal from rust and moisture—and dramatically reduces wear during all shooting conditions. Applying Lucas Extreme Duty Gun Oil to bores, bolt carriers, and gas pistons makes clean-up of powder residue, copper, and carbon fouling a much easier task. It neutralizes acids from fingerprints and resists drying for long-term storage use. Lucas Extreme Duty Gun Oil is great for lubrication on all high-heat, high-use firearms. It is sold in a variety of sizes and quantities.
( 2 )
$10.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
