Availability
Showing In Stock Items. Show All 48 Items.
Initial startup is the most critical time in the life of any camshaft. COMP Cams Pro Cam lube can break in your camshafts properly. This lube must be spread generously on all lobes of the cam, the bottom of the lifters, and the distributor gear when installing a cam. This is the instant protection that you need to guard against any premature wear.
( 94 )
$16.95
—
$22.95
VP Racing Pro Grade full synthetic motor oil is designed for professional, semi-pro, and high-intensity amateur racers for on-track applications. It delivers superior durability and friction control and includes high levels of ZDDP and a balance of friction and viscosity modifiers to maximize power and protection while lowering operating temperatures.
Not Yet Reviewed
$18.00
Maxima Oil Pro Gear Oil is full synthetic, ester-based gear oil offering unsurpassed performance and protection. Regenerative, synthetic polymers resist shearing, mechanical breakdown, and viscosity loss of the oil. The high-viscosity index (VI) formula offers consistent film thickness and performance over a greater operating temperature range. Pro Gear's technologically advanced formula increases horsepower and delivers superior anti-wear and extreme pressure protection from peak loads and elevated temperatures. Surface active chemistry delivers ultra-high film adhesion on gear faces, enabling higher load carrying capability and protecting critical gear interface areas and contact points. The fully formulated additive system contains anti-foam, rust, corrosion, and oxidation protection for high-stress conditions. Pro Gear is recommended for use in front and rear differentials, manual transmissions, and lower gear units of marine engines or anywhere API GL-5 gear oil is specified. Maxima Pro Gear oil is formulated with friction modifiers and is safe for use in hypoid gear systems.
( 7 )
$18.99
Maxima PRO PLUS+ oil is full synthetic lubricant designed for ultimate protection and reliability. This ester fortified oil extends 4-cycle engine and wet clutch longevity. It's formulated to surpass JASO MA2 standards, while the additives preserve the critical engine, transmission, and clutch components. Using Maxima Maxum4 Pro Plus oil will not only help your engine run cooler with less friction—you'll also notice improved fuel economy. The product is safe for all air and water-cooled 4-cycle engines where engine cleanliness and minimal engine deposits are expected.
( 4 )
$15.99
—
$16.99
Seafoam Marine Pro is a professional-grade fuel treatment specifically designed for marine engines. This additive is formulated to maintain maximum horsepower and performance. When you need a complete marine fuel system treatment, choose Seafoam. Product details: * Add to fuel system to clean fuel injectors and carburetor jets * Cleans and lubricates critical upper engine areas * Helps reduce long-term engine wear * Helps prevent corrosion caused by ethanol and water * Stabilizes tank fuel up to 2 years * Safe for all 2- and 4-stroke gasoline marine engines, inboard and outboard Uses: * For regular fuel system maintenance, add 1 oz. per 1.5 gallons of gasoline. One can treats up to 30 gallons. * For cleaning, use 2 or more oz. per gallon—the more you add to fuel, the better it cleans! * For stabilizing fuel, add 1 oz. per gallon.
( 4 )
$13.99
Pro-Line knows tires and understands that the strongest bond possible between the tire and wheel is a critical aspect of performance and tire longevity. Pro-Line engineers have developed the best tire gluing system ever devised with the specific needs of RC users in mind: Pro-Line Tire Glue. The first challenge was developing the strongest glue possible while also having the correct flow characteristics and dry time that RC racers and bashers desire. Pro-Line's new Tire Glue has a hold strength of 3,200 psi (Test Method: steel on steel in tensile shear), which is the highest strength of any tire glue available. Pro-Line's unique glue formula also provides the fastest drying glue possible while drying crystal clear (with no yellowing or whitening found when gluing tires with other glues). The Pro-Line development team did not just stop with improving the glue. Pro-Line engineers began the design process with the clear goal of revolutionizing the glue delivery system (bottle and applicator tip). Pro-Line Tire Glue features a super soft and squeezable round bottle that improves feel as you apply the glue, with the added benefit of the round bottle being significantly more stable on your pit table when compared to the elliptical shape found in all other glue bottles. The single biggest advancement of the tire glue system is the all-new translucent yellow P-L applicator tips. The tips are specifically intended around Pro-Line's exclusive round bottle design and snap into place for a secure fit while gluing. The P-L applicator tips are re-usable, unlike the throw-away tubes—and have the perfect size applicator hole for gluing tires. Pro-Line includes two P-L applicator tips with each bottle of glue for maximum value.
Not Yet Reviewed
$17.99
Liqui Moly Pro-Line engine flush has an effective formulation designed for quick and safe removal of deposits in engines before an oil change. Optimizes oil consumption, guarantees proper oil pressure in hydraulically activated systems and ensures proper oil flow after a cold start. Allows the fresh oil to immediately develop full performance while restoring full engine performance and reducing exhaust emissions.
Not Yet Reviewed
$16.99
Liqui Moly Pro-Line Throttle Valve Cleaner is a mixture of cleaning agents for cleaning and maintaining intake manifold and throttle body of gasoline engines. It dissolves and removes deposits and contaminants, restores normal function of moving parts—and it is also ideally suited to clean intake valves of modern GDI engines. It's simple to use and economical. Keep your intake system in perfect working order and help reduce repair costs with regular use of Pro-Line Throttle Valve Cleaner by Liqui Moly. Key features and benefits: * Used for degreasing and cleaning the inside and outside of carburetors and fuel injection systems * Suitable for use in all 4-stroke gasoline engines, with or without turbochargers * Rapid and effective cleaning and degreasing * Cleaning without dismantling * Safe with catalytic converters (EGR) and (GPF) systems * A preventive application every 12 months/10,000 miles is recommended
Not Yet Reviewed
$20.99
Liqui Moly Pro-Line Diesel System Cleaner is a highly effective mixture of additives with strong cleaning power for rapid removal of deposits from the fuel system in all kinds of diesel engines. The rapid and simple problem-solving formula cleans injectors and the combustion chamber, restores engine efficiency, and improves emission values. Benefits: * Removes deposits from entire fuel system * Increases operational reliability * Guarantees optimum combustion * Optimal engine performance
Not Yet Reviewed
$18.99
Pro-Enviro brake cleaner from PJ-1 cleans and degreases to remove contaminants from your brake units. This environmentally safe product will increase performance in your vehicle. Don't finish a job without using PJ-1 Pro-Enviro brake cleaner to get everything grease-free.
Not Yet Reviewed
$13.99
Liqui Moly Pro-Line JetClean gasoline system cleaner is a concentrated fluid developed exclusively for use with the Pro-Line JetClean Plus device. It removes undesirable residues and protects expensive components against wear and corrosion. Suitable for use in all 4-stroke gasoline engines, with or without turbochargers, and safe for use with catalytic converters and particulate filters (GPFs).
Not Yet Reviewed
$24.99
Liqui Moly Pro-Line Injector and Glow Plug Dismantling Aid is a special purpose high-performance fluid to assist in removing stuck injectors, glow and spark plugs. This penetrating aerosol oil removes heavy dirt, debris, deposits and gummed up sediments with ease and allows easy component removal. Product features and details: * Releases seized up and rusted on parts * Problem-free disassembly possible * Easily dissolves stubborn dirt * Dissolves rust * Areas of application: Used for removal of injectors, spark and glow plugs, etc. * Application: Shake well before use. Spray a generous amount directly onto the affected area and allow 15-30 minutes of penetration. In extreme circumstances, allow to soak overnight. Before removal, clear away any dissolved and/or loosened deposits. With heavily corroded parts, additional use of an appropriate rust remover may be necessary.
( 1 )
$12.99
Damage to a turbocharger may occur within seconds of engine start if not lubricated properly. Liqui-Moly Pro-Line turbocharger additive will provide initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Get the right protection and prevent additional repairs; choose Pro-Line turbocharger additive for proper break-in.
( 1 )
$14.99
PJ-1 Pro-Enviro carb and choke cleaner is used to clean all of your carburetor components. This cleaner quickly cleans valves, injectors, jets, and linkages. PJ-1 Pro-Enviro carb and choke cleaner is environmentally safe and contains no chlorinated solvents.
( 2 )
$11.99
aFe Magnum FLOW dry air filter cleaner was specifically developed for aFe POWER's PRO DRY S air filters, breaking down dirt and dust without damaging the synthetic material. You can maintain your air filter's optimal performance with regular cleanings, which are recommended every 20-30k miles. This cleaner comes in a 32 oz. ergonomic bottle with adjustable spray nozzle. Simply spray it on, and rinse it off!
( 1 )
$21.00
Driven Racing Oil XP3 synthetic racing motor oil offers outstanding high-temperature, high-shear protection. It is designed for aluminum blocks and looser clearances. The oil utilizes multiple synthetic base oils and anti-wear and friction reducing additives to reduce friction and fight valve-train wear. Driven Racing Oil XP3 synthetic racing motor oil is compatible with methanol and high octane race fuels. Racing applications: * Sprint and Midget engines * Late Model Stock * GM Crate engines * Pro Cup engines * 360 Sprints * NASCAR Spec engines
( 8 )
$19.98
ATI Super F transmission fluid is 100 percent synthetic type F fluid. This specially designed friction modifier chemistry is blended into a full synthetic to produce consistently crisp shifting, superior heat dissipation, and an amazing life span versus standard petroleum-based fluids. ATI has tested its Super F transmission fluid for over a year in their Drag Pak Challenger and for a full season in a Pro Street drag racing application.
( 40 )
$12.99
Red Line's 60WT drag race oil is a multigrade SAE 20W60 full-synthetic oil enhanced with ZDDP. The thermal stability, film strength and reduced parasitic drag found in Red Line engine oils all contributes to lower operating temps, increased engine life and more power. Red Line has a prestigious reputation with racers and enthusiasts alike for creating products that perform and protect better than any on the market. From 11,000 hp nitro engines to class-style applications in all forms of high performance and racing, Red Line has got you covered. Their lineup spans everything from a 5WT race oil all the way up to 70WT nitro oil. Keep your race competition vehicle running at its peak performance with the proper engine oil from Red Line. Born in a lab—proven on the track! Features, benefits, and specifications: * Multigrade SAE 20W60 full-synthetic oil enhanced with ZDDP (for racing engine applications only) * Popular in Top Alcohol and Pro Mod classes, AHDRA Nitro bikes and Blown Alcohol Tractor Pulling * Can be heated to evaporate fuel dilution and re-use * Improved valvetrain wear, less piston scuffing and improved bearing wear * Reformulated for improved frictional properties * Special detergents for improved lubricity and less detonation * Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution * Each Red Line product has no less than 2200ppm of zinc and phosphorus for anti-wear * Each Red Line race oil product is a multi-grade, offering 2 to 4 percent more power than oil of a similar viscosity * Improved protection at startup, lower oil temp, cleanliness * Remember to change these oils more frequently than regular motor oils
( 1 )
$18.95
Red Line RL-2 Diesel Ignition Improver cleans and lubricates injectors, pumps, and rings, while improving efficiency by up to 5 percent. Just 15 oz. of RL-2 will treat up to 300 gallons, making it convenient for trucking pros and commercial fleet operators to add one bottle at fill-up. Fleet customers and agricultural users can add one gallon of RL-2 to treat 2,600 gallons. This diesel fuel additive complies with federal low-sulfur content requirements for use in diesel motor vehicles and non-road engines. Order the size and quantity you need.
( 2 )
$15.97
Lucas FL-0 is a premium, super-efficient, low-viscosity racing engine oil formulated with an exclusive blend of PAO, organic esters, dispersants, borated organic compounds, friction modifiers and ZDDP. It is ideal for Pro Stock Racing or for any application using low-viscosity engine oils. Key features and benefits: * Ideal for any application using low-viscosity engine oils * Formulated with ultra-low viscosity synthetic base oils for maximum horsepower * Race-level protection for high performance, tighter tolerance engines * Provides excellent protection to vital engine parts including piston pins * Reduces drag and friction for quicker acceleration * High rpm protection and superior film strength * Extreme valve train protection
Not Yet Reviewed
$19.99
Maintain your air filter's optimal performance with regular cleaning and oiling, which is recommended every 20-30k miles. aFe air filter oil aerosol sprays are available to re-oil your clean Pro 5R and 10R, or Pro-Guard 7 air filter element. Specifically developed for each filter, the sprays help capture dirt and dust without damaging the element. Their color and quick absorbency make it easy to cover the element evenly. Take care not to over-oil the filter element. Choose the product designed for your filter.
( 9 )
$15.00
—
$21.00
Chill out! Liquid Performance Ice Water coolant is a water-based coolant designed for racing engines of all types. This innovative product contains no glycols or polyglycols, making it an environmentally friendly green product. It contains a broad-spectrum corrosion inhibitor package and is premixed with the purest deionized water to protect your motor from both ferrous and non-ferrous degradation and corrosion. It also contains proprietary ingredients that are designed to provide maximum heat transfer in the most extreme temperatures and operating conditions, allowing for greater horsepower without overheating. Liquid Performance Ice Water coolant meets the most stringent racing specifications and is AMA Pro Racing, WERA, CCS, and ASRA track approved for all race classes.
( 2 )
$18.99
Radiator Relief is simply the best coolant system additive on the market today. It's made for use with water or anti-freeze and is designed to function in two ways: It eliminates high temperatures in your passenger car, street rod, racecar, RV, etc., and will reduce the temp as much as 30 degrees F. It also provides a 50 percent quicker warmup time. This characteristic is not only beneficial to motorsports pros, but also to daily drivers who can enjoy the comfort of heat in half the time on those cold mornings.
( 7 )
$10.99
Now you can clean your tires like the pros with dirt tire soap from Allstar Performance. Simply mix Allstar's dirt tire soap with water and spray it directly on your vehicle's tires before washing them. The mud just falls right off!
Not Yet Reviewed
$18.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
