Availability
Showing In Stock Items. Show All 8 Items.
The most important product for proper flat tappet camshaft break-in is a high-quality lube. Howards Cams Max ZPM camshaft break-in lube virtually eliminates cam and lifter wear at initial break-in. It replaces the zinc phosphates removed from today's oils. Max ZPM offers the highest levels of zinc phosphates of all of the popular brands tested, plus it offers the addition of moly for extra protection. This break-in lube is compatible with all petroleum-based and synthetic oils.
( 17 )
$11.99
Initial startup is the most critical time in the life of any camshaft. COMP Cams Pro Cam lube can break in your camshafts properly. This lube must be spread generously on all lobes of the cam, the bottom of the lifters, and the distributor gear when installing a cam. This is the instant protection that you need to guard against any premature wear.
( 94 )
$16.95
—
$22.95
Crower ZPaste camshaft assembly lubricant is specially formulated to stay on contact points longer than other lubes, protecting parts from damage during initial startup. And after being dissolved in the oil, ZPaste's components will continue to help protect engine parts during break-in. Protect your cams, lifters, and other valve components during initial startup with the ultimate cam assembly lubricant—ZPaste. Crower ZPaste lubricant features: * Proprietary formulation of Zinc Dialkyl DithioPhosphate (ZDDP) types with a Molybdenum DiSulfide (MoS2) additive in a Calcium Sulfonate base * Extreme adhesion allows it to remain in place longer during initial break-in * ZPaste is designed to be used along with a bottle of ZDDPlus for initial engine break-in, and actually, increases the ZDDP level of your oil as it dissolves--no special break-in oil is required
Not Yet Reviewed
$14.99
WD-40 Specialist Rust Release Penetrant Spray gets deep into crevices, threads, and seams to break the bonds that hold stuck parts together. The formula features Blu Torch Technology--a proprietary blend of synthetic additives that goes to work quickly on rusted nuts, bolts, threads, locks, and chains leaving behind a protective layer that helps prevent rust and corrosion from reforming. WD-40 Specialist Rust Release Penetrant Spray s 50-state VOC-compliant and safe to use on plastics, rubber and metal.
( 4 )
$15.99
Lucas Chain Lubricant was developed to be a long-lasting, all-weather, all-temperature lubricant. This product is designed for chains and sprockets, open gears, cables and wire ropes, and closed gear boxes and differentials. The versatile lube has special agents to penetrate, break up rust, resist dirt, and resist slinging off fast-moving chains and gears. It's even salt water-resistant. Lucas Chain Lubricant contains anti-wear agents, friction modifiers, and is fortified with Organic Molybdenum. Order the quantity needed. Among its many uses: * Farms, Factories, Mines * Ships, Barges, Drag Lines * Logging Operations, Elevators, Oil Derricks
( 1 )
$13.99
Klotz Synthetic assembly lube is designed to provide exceptional lubrication during the assembly and initial startup of new or remanufactured engines. The fluid maintains a tenacious film on surfaces to prevent metal-to-metal contact. It is boosted with corrosion inhibitors to protect hardware from oxidation while in storage. The formulation quickly mixes with the primary crankcase oil once the engine is running. Klotz Assembly Lube facilitates the proper break-in of piston rings, bearings, camshafts, and lifters. It also prevents initial damage to cylinder wall coatings, such as Nikasil. This product can be used to lubricate the assembly of other equipment as well. This includes transmissions, differentials, marine lower units, and pumps.
Not Yet Reviewed
$10.50
Red Line assembly lube is designed to be applied to potential wear surfaces before assembly, in order to prevent metal contact upon startup before adequate lubrication is supplied. Red Line assembly lube will mix with the oils and not plug filters. Use it on all lubricated parts, such as cams, followers, pistons, bearings, and bolt threads. Only a small amount is needed on bearing and piston surfaces--too much can make it difficult to turn over the engine. Red Line assembly lube is an excellent corrosion-inhibitor and can be used on machined surfaces to provide long-term corrosion protection. Do not use this lubricant on exhaust bolts or other high-temperature bolts which require an anti-seize.
( 6 )
$19.99
Howards Cams CMD assembly lubricant offers the outstanding ability to withstand extreme pressures. The lube # 3 is compounded of highly refined petroleum products containing no lead, graphite, or minerals. It will not corrode the finest surfaces nor emulsify with cooling liquids. CMD anti-scoring extreme pressure lube #3 offered from Howards Cams come in 4 oz. and .5 oz tubes for efficient and convenient application.
Not Yet Reviewed
$17.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
