Lights & Lighting
Availability
Whether you’re in the shop or behind the wheel, our automotive lights and lighting parts and accessories give you the clear vision needed to get the job done right....
Whether you’re in the shop or behind the wheel, our automotive lights and lighting parts and accessories give you the clear vision needed to get the job done right. Safely tow your race vehicle, boat, or recreational vehicles with truck/SUV lights, light bars, trailer lights, brackets, and mounting kits. Power your way through darkness, fog, and other low-light conditions with automotive lighting—headlights, tail lights, fog lights, auxiliary lights, and more. You can even transform your workspace with garage lighting, including shop lights, portable work lights, and spotlights. For top-brand, high-quality automotive...
Whether you’re in the shop or behind the wheel, our automotive lights and lighting parts and accessories give you the clear vision needed to get the job done right. Safely tow your race vehicle, boat, or recreational vehicles with truck/SUV lights, light bars, trailer lights, brackets, and mounting kits. Power your way through darkness, fog, and other low-light conditions with automotive lighting—headlights, tail lights, fog lights, auxiliary lights, and more. You can even transform your workspace with garage lighting, including shop lights, portable work lights, and spotlights. For top-brand, high-quality automotive lighting, no one outshines Summit Racing!
Clearance
Denali Electronics flush light mount kits provide a waterproof gasket and all the necessary hardware for installing a Denali DRL or B6 visibility pod to any flat surface on your vehicle. You can use these kits to mount DRLs to body panels and hand guards or flush mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
Not Yet Reviewed
$19.00
$11.50
Denali Electronics B6 brake light visibility pods are purpose-built to create the greatest amount of light from the smallest, most low-profile housing possible. The B6 brake lights are unbelievably bright, but will practically disappear once installed. Complete with an integrated run-brake circuit, the 3-wire B6 pods will run at 50 percent intensity on the red wire—and switch to 100 percent intensity via the orange wire. These pods are compatible with a variety of mounting kits that enable them to be mounted below a license plate, on the side of a license plate, or flush mounted onto any flat surface. Complete with a waterproof micro-connector and included posi-taps, the B6 third brake light assemblies are easy to connect into any vehicle's brake light circuit. The B6 also connects directly to the Denali CANsmart Controller—to enable programmable flash pattern braking and deceleration-activated auto brake light functionality. B6 is, simply, the brightest and most feature-rich auxiliary brake light on the market. Features: * Dual circuit: Running and brake * 180 degree viewing angle * Six high-power LEDs * Low 6 watt power consumption * Low-profile design
( 3 )
$72.99
—
$138.99
Denali Electronics DRL visibility pods are purpose-built to create the most light from the smallest, low-profile housing possible. DRL (daytime running lights) auxiliary lights are unbelievably bright—but will practically disappear once installed. The white or amber pods are compatible with a variety of mounting kits that enable the lights to be used as DRLs, turn signals, and backup lights. Choose between an offset mount, fender mount, or flush mount. Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart accessory controller or to any Denali 2.0-series wiring harness. When connected to a Denali 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.
Not Yet Reviewed
$72.99
Clearance
Denali Electronics fog light mounts are machined from heavy-duty steel to secure your compact and powerful Denali DR1 LEDs. These Jeep-specific mounts are black powdercoated for added durability and are designed to fit in the factory fog light location to make installation easy. The brackets come with the necessary wiring adapter to plug your DR1 lights directly into the factory harness. This provides you control from the factory fog light switch. Secure your fog lights properly with the easy installation of Denali mounts.
Not Yet Reviewed
$95.99
$47.50
Position your lights with Denali Electronics articulating bar clamp light mounts. Offered in several choices, these unique mounts feature an octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters. Each clamp comes with a fully rotatable mounting shelf that creates a super versatile and robust light mounting solution. They will fit engine guards, crash bars, frame tubes, handlebars, inner or outer fork tubes, or any tube within the clamp's specified diameter range on just about any 2- or 4-wheeled machine you're driving. Articulating bar clamp mounts features: * Billet aluminum construction * Available in anodized black or polished chrome * Adjustable grip range * Rotatable mounting shelf allows fourth axis of adjustability * Mount lights to shelf or directly to the clamp itself * Accepts M8 bolt from light pods * Kits include two clamps, two rotatable mounting shelves, and hardware kit
( 2 )
$92.99
—
$122.99
Denali Electronics driving light mounts are offered in universal and vehicle-specific applications to better suit your specific needs. These powdercoated brackets assist in mounting any Denali driving light in the optimum position—be it a motorcycle, ATV, snowmobile, or Jeep. Order the model you need.
Not Yet Reviewed
$48.99
—
$145.99
Denali Electronics D2 LED lens kits are designed to maximize visibility in foggy and rainy conditions. Both amber and Selective Yellow lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. Choose amber to match your OEM turn signals, or Selective Yellow for even more daytime visibility to oncoming traffic. You could also use one of each to create a 50-50 True-Hybrid that combines the best of both worlds! Order a TriOptic replacement lens kit for your Denali Electronics D2 lights to penetrate foggy, wet conditions. D2 LED lens kit - in the box: * 2 D2 spot lenses for maximum distance * 2 D2 flood lenses for maximum spread
Not Yet Reviewed
$29.99
Clearance
Denali Electronics H4 anti-flicker adapters are specially designed to accompany the M5 and M7 DOT LED headlight modules—to eliminate flickering caused by PWM dimming signals used in many CAN bus systems. The plug-and-play adapter is for use with vehicles originally equipped with H4 headlight bulb size. The adapter simply plugs inline between the M5 or M7 headlight and the vehicle's factory H4 headlight connector.
Not Yet Reviewed
$52.99
$26.50
Denali M7 LED headlight modules are direct plug-and play replacements for the original 7 in. sealed beam headlights on your motorcycle. They feature a super-wide low beam, piercing high beam, and halo daytime running light. Drop one of these modules inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight—and twice as far as a stock LED headlight. The unique design and black chrome finish of the optics will give your bike a modern custom look, while also increasing your visibility to oncoming traffic even during daylight. Additional product features: * Plug-and-play with H4 connectors * Premium LEDs boast an average life span of 50,000 hours * DOT-approved high and low beams * Robust aluminum housing * Enhances visibility and safety * IP-68 waterproof
Not Yet Reviewed
$509.99
Denali Electronics DM LED light pods were designed to concentrate 1,095 lumens into a small optic to create a super-compact light that's incredibly bright to look at. These lights are the ideal solution for daytime visibility but will still outshine your typical high beam. Features and contents: * High-Intensity Series Cree LEDs outputting 1,095 lumens per pod * DrySeal submersible waterproof light can withstand the most extreme environments * Impact PC polycarbonate bezels won't crack, fade, or corrode like traditional aluminum bezels * LiveActive Thermal Management keeps the LEDs cool, preventing the loss of light output from overheating * IP67 waterproof and submersible * One LED light pod * One spot lens (installed) * One E-Mark approved elliptical flood lenses * One hinge mount with M8 stainless steel hardware * One wiring pigtail
Not Yet Reviewed
$133.99
Denali Electronics D2 LED light pods feature DataDim Technology and create an impressive beam of light that is perfectly balanced between nighttime distance and daytime conspicuity. Features and contents: * High-Intensity Series Cree LEDs outputting 1,095 lumens per pod * DrySeal submersible waterproof light can withstand the most extreme environments * Impact PC polycarbonate bezels won't crack, fade, or corrode like traditional aluminum bezels * LiveActive thermal management keeps the LEDs cool, preventing the loss of light output from overheating * One LED light pod * One spot lens (installed) * One E-Mark Approved elliptical flood lens * One hinge mount with M8 stainless steel hardware * One wiring pigtail
Not Yet Reviewed
$179.99
Denali Electronics fender light mount kits are purpose-built to secure their DRL and pod lights. The kits contain high-quality components that are simple to install, and allow you to position your lights ideally where you want on your motorcycle, ATV, or other 2- or 4-wheeled machine. They are also designed to not disturb the natural aesthetics of your vehicle. Select the Denali fender mount light kit that best suits your needs.
Not Yet Reviewed
$44.99
—
$58.99
Denali Electronics D4 LED lens kits are designed to maximize visibility in foggy and rainy conditions. Both amber and Selective Yellow lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. Choose amber to match your OEM turn signals, or Selective Yellow for even more daytime visibility to oncoming traffic. You could also use one of each to create a spot-hybrid that adds some additional close-range fill while maintaining distance. Order a TriOptic replacement lens kit for your Denali Electronics D4 lights to penetrate foggy, wet conditions. D4 LED lens kit - in the box: * 2 D4 spot lens for maximum distance * 2 D4 hybrid lenses for 50-50 True-Hybrid
Not Yet Reviewed
$58.99
Denali Electronics CANsmart GEN II controllers allow the flexibility and intelligence of your motorcycle's CAN bus electrical system to make installation of accessories drastically easier. They provide plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings. The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and a B6 auxiliary brake light. Denali Electronics CANsmart GEN II controllers provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. Features: * Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch * Independently control two sets of lights ON/OFF and change intensity level for both day and night right from your original vehicle switches * Set auxiliary lights to modulate to increase your visibility to other motorists * Pulse your high-beam switch three times and your auxiliary lights will strobe three times faster * Cancel with turn signal feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal * Inverse flashing with hazards feature flashes your auxiliary lights inversely to your hazard lights, increasing visibility during road side emergency's * Strobe with horn feature will automatically strobe your auxiliary lights when you sound your horn * Deceleration activated smart brake technology reads vehicle speed in real time to activate your brake light during deceleration before you even touch the brake * Flash pattern braking provides four different flash patterns that make their super bright auxiliary brake lights even noticeable * Circuit function selector will let you run any accessory of your choice on any of the four circuits * Switched power source provides a universal "accessory" option which simply gives you clean switched 12V power * Delay time out will keep accessories powered for up to 30 seconds after your turn off your bike Included in the box: * CANsmart controller * Two 5.5 ft. light extension cables * 5 ft. SoundBomb horn extension cable * B6 brake light wiring adapter * Zip-ties * Adhesive hook-and-loop fastener * Micro-USB programming cable
Not Yet Reviewed
$314.99
Denali Electronics' D4 LED light pods are one of their most powerful lights, packing the punch of 4,380 lumens in an aggressively styled housing. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern: a super-wide, close-range flood and a piercing spot beam in one housing. The included spot lens projects a massive beam of light and carries an official e-Mark certification. Denali D4 auxiliary LED light pods are ideal lighting options for motorcycles, ATVs/UTVs, snowmobiles, Jeeps, and trucks. D4 pod features and specs: * High-Intensity Series Cree LEDs (10 W; XPL HI) outputting 4,380 lumens per pod * DrySeal submersible waterproof light and switch housings can withstand the most extreme environments * LiveActive thermal management keeps the LEDs cool, preventing the loss of light output from overheating * Low-profile mounting bracket with stainless steel hardware included * Amber lenses available (sold separately) * Power draw: 3.3 amps * DataDim compatible: yes * Operating voltage: 12 V DC * Pod size: 3.9 in. square x 2.6 in. deep (each) * Pod weight: 1.55 lbs. (each) * IP67 waterproof and submersible In the box: * 1 LED light pod * 1 True-Hybrid lens (installed) * 1 e-Mark-approved spot lens * 1 hinge mount with M8 stainless steel hardware * 1 wiring pigtail
Not Yet Reviewed
$244.99
Denali Electronics D7 LED light pods are one of the brightest LEDs under 4.5 in. They feature seven high-intensity 10-watt LEDs focused through a proprietary single-piece optic, specifically engineered to create a full-bodied spot beam reaching over 1,200 ft. at one lux! Still not convinced these lights are bright enough? A D7 pod will outshine seven D2s and produce more than twice the light output of Denali's beastly D4 light pod. The D7 auxiliary LED light pods are ideal lighting options for motorcycles, ATVs/UTVs, snowmobiles, Jeeps, and trucks. D7 pod features and specs: * 7 High-Intensity Series Cree LEDs (10 W; XPL HI) outputting 7,665 lumens per pod * DrySeal submersible waterproof light and switch housings can withstand the most extreme environments * Impact PC polycarbonate bezels won't crack, fade, or corrode like traditional aluminum bezels * Robust heatsink and LiveActive thermal management keeps the LEDs cool, preventing the loss of light output from overheating * Low-profile mounting bracket with stainless steel hardware included * Power draw: 5 amps * Beam width: 125 ft. * DataDim compatible: yes * Operating voltage: 12 V DC * Pod size: 4.4 in. round x 2.9 in. deep (each) * Pod weight: 1.8 lbs. (each) * IP67 waterproof and submersible * e-Mark-approved spot lenses In the box: * 1 LED light pod * 1 hinge mount with M8 stainless steel hardware * 1 wiring pigtail
Not Yet Reviewed
$334.99
Denali Electronics 2.0 Premium wiring harnesses feature high-quality waterproof components and are designed to power two Denali 2.0 LED light pods (sold separately). The wiring harnesses feature low-profile, water-tight connectors and premium molded wire ensures moisture is kept out of the system. A completely sealed, waterproof switch has been engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. The harnesses clever design allows them to be either flush or bar mounted. These watertight harnesses also feature a clever HotSwap design that enables an effortless swap from the standard single-intensity relay to Denali's dual-intensity DataDim controller (sold separately). Simply plug-in DataDim controller to enable lights to switch between half and full intensity with vehicle's original high beam switch. What's included in the box: * Denali 2.0 Premium wiring harness * Single-intensity relay * DrySeal on/off illuminated waterproof switch * 7/8 in. and 1 in. handlebar switch mount * Two self-tapping screws * Adhesive switch mount pad * Four zip ties
( 1 )
$115.99
Denali offset light mounts are designed to mount a pair of Denali DRL or B6 visibility pods to the side of any M6 mounting point on your vehicle. The pair of powdercoated steel brackets create the ideal mount for tucking DRLs up inside your motorcycle's fairing. Offset mounts can also be used to position B6 brake light pods to the side of your license plate. In the box: * 2 offset mounting brackets * M6 hardware kit * Wiring splitter * 3 Posi-tap connectors
Not Yet Reviewed
$109.99
United Pacific backup lights are available in styles, shapes, and sizes, as well as incandescent or brilliant LED choices to fit vintage and classic rides. These important warning lights illuminate objects behind your vehicle when it is moved into reverse. United Pacific backups will shine brightly to bring both safety and style to your vehicle's rear-end.
Not Yet Reviewed
$39.99
United Pacific LED sequential taillights take your rear-end illumination to another level. These lights contain super-bright red LEDs with fully sealed epoxy coated electronics. A selector switch enables you to control the sequential function moving left, moving right, or off. The taillights also feature a brake attention option with a sequential-once function. (Some models require the use of United Pacific LED turn signal flasher, item number 90652 or 90649.) Most taillights include double connector with offset pins and will plug into your existing tail lamp socket. Add some style and 21st century pizazz to your vehicle with stunning sequential taillights.
( 12 )
$49.99
—
$130.99
United Pacific LED parking lights can increase vehicle visibility with a brighter and more intense light output. With their solid-state construction, these LEDs are virtually impervious to shock and vibration. An epoxy seal provides LED diodes and electronics with complete protection from moisture and corrosives, and their polycarbonate lens resists impacts and collisions much more than acrylic plastic models. These LED parking lights are available in a choice of styles and lens colors to complement the look of your vehicle and are DOT/SAE-compliant.
( 19 )
$20.50
—
$76.99
United Pacific sequential LED taillight assemblies feature super bright LEDs set behind a polycarbonate lens. These taillight assemblies have a selector switch to control sequential on/off function. They also feature a brake attention option with sequence-once function. Order the taillight assembly to fit your make and model vehicle—once installed, there's no doubt you'll get noticed! Additional features include: * Available to fit the driver or passenger side of vehicle * Epoxy coated, fully sealed electronics to keep housing unit free of debris and moisture * Energy efficient solid-state circuit board engineered for 12 V DC systems * LED license plate illuminator lens on bottom (on some models)
( 29 )
$34.50
—
$100.99
United Pacific cargo/brake lights are illuminated with bright, long-lasting LEDs to add safety and style, all in one package. Features: * 14 white LED cargo light with integrated 7 red LED 3rd brake light feature * Easy plug-in design with 1004 double contact plug as original * Third brake light requires additional wiring--instructions included * Epoxy coated, fully sealed electronics * Energy efficient solid-state circuit board engineered for 12 V DC systems * Lifetime warranty
( 1 )
$38.99
Summit Racing™ 7in. LED headlights are state of the art when it comes to LED lighting. These lights feature a tempered glass lens for strength and durability, anti-flicker electronics, an IP67 waterproof rating, and a valve for heat and moisture dissipation. These DOT-compliant headlight assemblies come complete with a harness for plug-and-play install and adjustable mounting hardware for easy aiming. The powdercoated aluminum housing and 6000k color temperature gives the lights a crisp look and clean finish.
( 1 )
$321.99
—
$401.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
