Availability
Showing In Stock Items. Show All 37 Items.
Upgrade your vehicle's rear-end with the brilliance of Morimoto XB LED taillights. These complete taillight assemblies swap directly in place of the originals, using all the stock mounting points and without any special wiring. They plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-and-play install. Plus, even though they look better than stock, they don't look out of place, flowing with the body lines of your vehicle and matching the OEM trunk trim. Morimoto XB LED taillights feature durable high-impact polycarbonate lenses to resist the test of time, looking new for many years to come. The housings are made of injection-molded ABS that is lightweight, strong, and IP67 waterproof. No doubt your original taillights look fine, but if you have upgraded the power, wheels, and tires, isn't it time for a high performance facelift on the rear of your vehicle, too? Morimoto offers the perfect choice in their XB LED taillights to complete your vehicle's new attitude.
( 8 )
$758.00
—
$817.00
ZROADZ front roof LED light kits come complete with light, mounting brackets, wiring harness with fusible link, relay, switch, and all necessary hardware. The kits are offered with curved light bars, straight light bars, or roof top side-mounted pods. Packages are also available that combo light bars with top side-mount or A-pillar/hinge-mount pods for extreme auxiliary illumination. All ZROADZ light bars and pods have CREE LED chips, premium optics, and clean, crisp light output set in IP67/68/69 rated housings to provide extreme waterproof protection in off-road environments. ZROADZ front roof light kits feature laser-cut mild steel mounting brackets and a heavy-duty solid rubber gasket for a secure, watertight installation. Many of the roof brackets feature a patented through-bolt fastener that provides minimal exterior penetration and a convenient method to run wires into the cab without the worry of weatherstripping wind noise and leaks or other subpar wire routing methods. Choose the style and fit for your vehicle and order today from Summit Racing™.
Not Yet Reviewed
$794.50
Anzo offers projector plank-style Switchback headlights for a variety of Corvette models from 2005 and up. These replacements feature: high and low beam, amber turn signal, Switchback LED running lights, a black housing and bezel, and crystal clear lens. Order the headlights recommended for your application.
( 2 )
$899.00
—
$989.00
Anzo headlights are top-quality replacements or upgrades for specific vehicle applications. The simple plug-and-play assemblies give your vehicle a fresh look and added safety. SAE and DOT-compliant, the headlights are rigorously tested to ensure superior operation for the improved visibility of your vehicle, no matter the time of day or weather conditions. Anzo headlights are computer-designed to illuminate your ride for a modern look—and passenger safety, as well. More than 500 models are available, many with crystal-clear headlights or trendy projector lights featuring the newest halo design. Some models utilize cathode fluorescent lamp (CCFL) technology—the brightest, most efficient performance lighting. Order the pair recommended for fitment on your vehicle.
( 326 )
$899.00
Diode Dynamics Elite Series LED headlights provide full LED illumination for both low and high beam function, with the modern, rectangular bi-LED projector. These units offer a higher intensity than both the OEM halogen and LED options, shining light far down the road ahead. The beam pattern has a sharp cutoff, with excellent center intensity and strong width for fantastic nighttime driving experience. Elite Series headlights are assembled using OEM-grade materials, including a cast aluminum driver and heatsinks, UV-coated outer lens, aluminum-core circuit boards, and automotive-grade LED emitters. They're then robotically sealed and pressure-tested against moisture. Features: * Full LED Headlights * Welcome Sequence when unlocking your vehicle * Four DRL modes * Dual-color DRL * Plug-and-play; no modification needed * Includes: -- Two Elite headlamps -- Two headlamp adapter harness -- External DRL/ aux tap -- Elite Adjuster 4mm hex -- Lumens: 917 (Low Beam), 1398 (High Beam) -- Intensity (cd): 54,500 (Low Beam), 76,000 (High Beam) -- Color temp: 6000K -- Sport models will use the included add-a-fuse to provide DRL power
Not Yet Reviewed
$899.95
Upgrade your vehicle's rear-end with the brilliance of Morimoto XB LED taillights (Gen II). These complete taillight assemblies swap directly in place of the originals, using all the stock mounting points and without any special wiring. They plug into the factory connectors for the stock lights; and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-and-play install. XB taillights look better than the originals without seeming out of place, as the trim flows with the body lines of your vehicle. This new design features three rows of 3D light blades that complement the edgy geometry on the 5th-generation 4Runner, and they look right at home on the back of the truck. The TIR-based optics serve as the brake light and turn signal, and they're extremely bright--easily visible both day and night. Pair that with the amber reverse-sequential turn signal, optional smoked or red outer lens ... and Morimoto XB LED taillights (Gen II) are one of the best-looking sets available for the T4R! More specifications and features include: * Durable high-impact polycarbonate lenses to resist the test of time * Housings made of injection-molded ABS that is lightweight, strong, and IP67 waterproof * SSC LED light source * Plug-and-play compatibility with LED700 XB backup light boost bars
Not Yet Reviewed
$758.00
XK Glow XKchrome LED switchback headlight kits offer a truly unique design for your Jeep. Using the latest bi-LED technology, these kits help you achieve a distinctive halo effect with super-bright RGB switchback turn signals and bug-zapping performance! Combined with the powerful XKchrome app, an XK Glow headlight kit will help your Jeep stand out from the crowd. Order the model designed for your application needs. Features and specs may include: * Mini XKchrome BLE app controller * Jeep headlights * Adapter wires * Mounting accessories * iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher * Android device compatibility: Must be equipped with Bluetooth 4.0 (BLE) and Android 4.4 or higher version system * Max load: 3 amps per XKchrome mini controller * Light power consumption per headlight: 26 watt low/32 watt high * Input voltage: 12 V * Sensor wire input voltage: 12 V * Reversed polarity protection * Transient voltage suppression * Controller dimensions: 1.75 in. x 0.8 in. x 0.35 in.
Not Yet Reviewed
$769.99
Putco Blade LED tailgate light bars feature brilliant and defining LED light output in red, amber, and white custom designed to fit all full-size trucks. They are fully encapsulated in a tinted polycarbonate housing and are IP69K fully sealed for water and weatherproofing. The light bars have over 2,000 high-power COB LEDs and include a 4-prong wiring harness for easy hookup to receiver hitches. Putco Blade LED tailgate light bars include patented attachment clips for easy removal to access spare tire release. They operate with running lights, brake lights, reverse lights, and turn signals.
( 6 )
$762.99
Rigid Industries A-Pillar mount kits with 360-Series lights are designed for various Dodge RAM and TRX applications—and allow for a clean install of RIGID's high-output LED lighting. The kits include two A-Pillar mounting brackets, two 4 in. or 6 in. 360-Series Amber Backlight Drive beam pattern LED lights, two solid black light covers, two transparent amber light covers, and a wiring harness. Own The Night with RIGID's complete A-Pillar LED light kit! Additional details: * Complete LED Light A-Pillar Mount Kit * Stainless Steel Construction * UV and Abrasion-Resistant Powdercoat * A pair of 4 in. or 6 in. 360-Series Drive Lights with Amber Backlighting (depending on model) * Black and Transparent Amber Light Covers Included * Wiring Harness and Switch Included * Back Lighting Independently Controlled * 9-36 V DC Operation * Flying Leads for Universal Installation * Alloy Housing and Heatsink * Reverse Polarity Protection * Over/Under Voltage Protection * IP68 Compliant - Dust/Water Ingress * Pressure Equalizing Vent * 50,000 Hr+ LED Lifespan * Limited Lifetime Warranty * Professional installation recommended
Not Yet Reviewed
$792.99
On Sale
Oracle Oculus ColorSHIFT Bi-LED Projector Headlights are now available in a ColorSHIFT RGB+W color-changing version! These headlights feature advanced LED projection with 4,800 lumens of high-quality illumination for enhanced driver visibility in all weather conditions. The LED light source has lower power demands compared to the factory lamps while providing more light output. Select the model with controlling options you prefer. ColorSHIFT Oculus Headlights include 3-tiered RGB features in the lamps: - Outer Halo Ring (RGB+W) - Inner Halo Ring (RGB) - Projector Demon Eye (RGB) Each LED feature has a separate cable output and can be connected together so all three create the same color or are set up as three separate channels or "zones," depending on the user preference and the ColorSHIFT controller selected. (Please note that these features are intended for off-road "show" use only and are not compliant for street use.) The Pure-White DRL has its own wiring harness (same as the original Oculus) that connects to the fuse box with an add-a-circuit for easy and safe integration. The DRL will come on when the engine is running or can be connected to a switch (including the factory Aux switches) for additional user control. Specifications: * Wattage: 36 watts each * Total raw lumens: 4,800 LM * Color temp: 5500K * Certification: DOT SAE HL VOR 1 * Warranty period: 2 years * Multi-national patented design Package contents: * ORACLE Lighting Oculus 7 in. ColorSHIFT Bi-LED Projector Headlights * DRL wiring harness * Add-A-Circuit fuse adapter * 6x RGB wiring extensions * (RGB Controller included if selected from options) * Features: Precision LED lighting projector for optimum light distribution and beam angle. Installs using original mounting hardware; headlight wiring is plug-and-play into the factory connector without additional relays or harnesses. Halo DRL features over 200 bright white LEDs for a vivid lighting impact. * Benefits: These all-new headlamps provide enhanced driver visibility with increased and focused LED light output. Complete headlight replacement, better light focus than a simple bulb upgrade. Uses original factory beam angle adjustability for proper light focus on lifted Jeeps. * Safety: Light focus is very important for not only driver safety but others on the road who can potentially have their vision obstructed by glare. This is especially significant on lifted vehicles where the light source is raised and in a position to interfere with the field of vision of other drivers. These new Oculus headlights feature a very sharp cut-off line and focus light with precision specifically to avoid such issues. * Reliability: It is undeniably important to implement proper thermal management tools for high-performance LEDs to operate with reliability in various environments. Oculus utilizes both active and passive cooling methods to sustain low LED temperatures. Remote mounted heat sinks and an internal cooling fan work in conjunction to ensure proper temperature control and longevity of the LEDs.
Not Yet Reviewed
$903.99
—
$1,060.99
$768.39
—
$901.84
On Sale
What's your favorite color? Oracle ColorSHIFT halo headlights offer options to accent your vehicle's exterior style. They feature Oracle's RGB lighting technology that's capable of producing hundreds of vibrant colors. They use a special tri-node 5050 SMD LED that can emit any color via the included control unit. You can set the rings to one color—or use one of the dozens of pre-programmed LED effects. Oracle ColorSHIFT halo headlights also include a remote control (where noted). So, why choose one color when you can have them all? Oracle Lighting ColorSHIFT halo headlights will color your ride with amazing, eye-catching appeal! Order the model designed for fitment with your specific vehicle.
( 3 )
$916.50
$779.02
Baja Designs LP4 Pro LED auxiliary light pods are the smallest variants in the LP lineup, but maintain all the power, features, and technologies to fulfill all your lighting needs. These universal lights are available in different light patterns, lens colors, and backlight options, as well as individually or in pairs that include wiring harness. Choose the Baja LP Pro Series light pod(s) with the features you prefer. LP4 Pro LED light pods feature: * Hard anodized machined aluminum housing * Hard coated polycarbonate lens * Machined billet aluminum bezel * Stainless steel mounting hardware * Replaceable lenses and optics * Moisture Block protection—waterproof, rain proof, submersible * 5000K Daylight natural color—less drive fatigue * 8,750 total lumens * 200-degree spread of usable LED light * Direct Ducted Cooling (DDC) technology—improves cooling capacity and performance * Patented Integrated Peripheral Technology (IPT) * Driving/combo pattern provides driving and spot optics * Spot beam pattern--longer and narrower beam focus for illumination further down the trail or road * Driving combo, clear lens backlight options—amber, red, blue, and green
Not Yet Reviewed
$994.95
Baja Designs' S8 20-inch LED light bars offer a slim and sleek design utilizing eight LEDs per 10-inch section. These 20 in. light bars feature high-performance reflectors, and the additional feature of an amber backlight that makes the S8 a light bar that shines with your vehicle. The light bars are backed by Baja Designs 30-day satisfaction guarantee and limited lifetime warranty, giving you the ultimate in-purchase protection! Product highlights: * One 20 in. LED light bar * Housing material—aircraft grade aluminum with Mil-Spec hard anodize * Bezel material—billet machined aluminum * Lens material—clear hardcoated polycarbonate * LED lighting technology * ClearView—all the light, right where you need it * Stainless steel mounting hardware * Built-in overvoltage protection * IP69K rated (waterproof up to 9 ft. and pressure washable) * IK10 compliant (Mechanical Impact Testing) * Exceeds MIL-STD810G (Mil-Spec Testing) Optic styles: * Driving Combo: Maximum trail coverage in a single light—the driving combo pattern is equipped with both driving and spot optics to provide you with a smooth blend of light for both near field applications in lighting zones 1 and 2 and distance in zone 3 * Spot: A longer and narrower 9-degree focus beam for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Cornering and/or Driving Combo beam lights * Wide Cornering: The wide cornering pattern offers a 42-degree flattened horizontal beam, reducing blind spots, and enhancing peripheral visibility in lighting zones 1 and 2—this cornering pattern is perfect for inclement weather such as dust, snow, rain, or fog conditions while also perfect for seeing obstacles on the trail, trail conditions, and potential hazards, making it easier to navigate through tight turns, winding trails, or through wooded areas * Select models with Work/Scene optics offer excellent work light or "scene light" with an extremely smooth 120 degree circle that projects about 40 ft. (This pattern is not suitable for driving) Note: This light bar does not include a wiring harness (sold separately).
Not Yet Reviewed
$849.95
—
$854.95
Morimoto 4Banger HXB LED Wide Beam Lights illuminate the ground directly in front of the vehicle. The HXB Optics feature dual axis control—1) for width; and 2) active hot spot control, to project peak intensity right along the top of the beam pattern. The proper vertical gradient resembles an SAE-compliant fog light pattern, but with added intensity throughout thanks to the Osram HX Boost LEDs. The 4Banger HXB Wide beam delivers the best combination of width, intensity, and control—making it the most effective off-road LED fog light in the world. The overall footprint of the 4Banger HXB is approximately 30 percent smaller than alternatives that offer comparable performance. This allows for an unbeatable OEM+ like fitment when paired with Morimoto's fog light or A-Pillar mounting kits, which are available for today's most popular trucks. Don't be that guy with LED pods bulging out of your bumper. * PERFORMANCE: There are no "off the shelf" guts inside of a fancy housing here. Every element of the 4Banger HXB is proprietary. LucidShape was used to optimize performance around the most modern, lumen-dense LEDs from Osram. Thermal dynamics have been optimized using SolidWorks. The 4Banger HXB is available with three industry-leading beam patterns to suit every need: Wide/Fog, Spot, and Combo. * ALL WEATHER: The white-output version is ideal for all-around visibility. For those who desire optimal output in rain, snow, or fog—the Yellow-output version will slay in shady weather. Morimoto has opted for LEDs that produce yellow light at the origin, which is the most effective way to penetrate through particles in the air without compromising output. * RELIABILITY: High power means high heat, which is why the 4Banger features a copper DTP (direct thermal path) PCB that maximizes heat-transfer to the radiator, which has been optimized through numerous rounds of thermal analysis. The cast aluminum shell is electroplated before powder coating to withstand flaking. The potted internals, over-molded input wiring, and main gasket are all designed according to IP69K standards for full weather resistance. *BOLT-ON: Each set of Morimoto 4Banger LED pods include a set of pedestal mounts for a universal fitment. Morimoto also offers a variety of application-specific mounting bracket kits for fog lights and A-Pillars that make them bolt-on for many of today's most popular trucks.
Not Yet Reviewed
$816.00
Diode Dynamics Stage Series light bars were inspired by the needs of a professional rally driver. These LED lights have been designed for maximum functionality, with compact size, custom-engineered TIR (total internal reflection) optics, and a useful beam pattern—all in a highly durable package. The rectangular bars are available in numerous sizes, as well as styles such as driving, flood, or combo beams. Their extruded aluminum housing is finished with a matte black powdercoat; and the polycarbonate lenses are offered in white or amber. Order the length and options preferred for your vehicle application.
Not Yet Reviewed
$839.95
Are you in search of quality OEM replacement headlight assemblies to get your ride back on the road? Body Part headlight assemblies are direct fit, easy-to-install reproductions made from quality materials. They're designed to replace old or damaged parts and are perfect for collision repair or restoration projects. Body Parts headlight assemblies are made for specific applications, and will help make your car, truck, or van look like it just rolled off the assembly line. Order the model designed for fitment on your ride.
( 105 )
$882.99
—
$919.99
Baja Designs XL Pro LED light pods make it easy to illuminate the terrain in front of your vehicle and are perfect for enthusiasts that need a vast amount of light in a versatile package. The XL Pro uses Baja Designs' trademarked high-speed spot reflectors providing for a longer and wider beam pattern with our next-generation LED technology that provides 65 percent greater distance over their previous generation model while pushing 4,095 raw lumens per light. The XL Pro is highly durable and offers a 20 percent dimming feature, making it the perfect auxiliary light for off-road vehicles such as trucks, vans, UTVs, and motorcycles. Lights are sold individually or sold in pairs. The single light kits come with the mounting hardware only. The two-light kits include a wiring harness and all necessary mounting hardware to get you up and running quickly. Product features: * Housing material—hard anodized and powdercoated cast aluminum * Lens material—hardcoated polycarbonate * Bezel material—billet machined aluminum * LED lighting technology * Stainless steel mounting hardware * Built-in overvoltage protection * ClearView—all the light, right where you need it * CopperDrive—only LED driven at 100 percent * IP69K rated (waterproof up to 9 ft. and pressure washable) * IK10 compliant (Mechanical Impact Testing) * Exceeds MIL-STD810G (Mil-Spec Testing) * All Baja Designs lights are backed by a 30-day satisfaction guarantee and their limited lifetime warranty for the ultimate in purchase protection Optic styles: * Driving Combo: Maximum trail coverage in a single light—the driving combo pattern is equipped with both driving and spot optics to provide you with a smooth blend of light for both near field applications in lighting zones 1 and 2 and distance in zone 3 * Spot: A longer and narrower 9-degree focus beam for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Cornering and/or Driving Combo beam lights * Wide Cornering: The wide cornering pattern offers a 42-degree flattened horizontal beam, reducing blind spots, and enhancing peripheral visibility in lighting zones 1 and 2—this cornering pattern is perfect for inclement weather such as dust, snow, rain, or fog conditions while also perfect for seeing obstacles on the trail, trail conditions, and potential hazards, making it easier to navigate through tight turns, winding trails, or through wooded areas
Not Yet Reviewed
$756.95
—
$806.95
Baja Designs XL Sport auxiliary LED light pods make it easy to light up the terrain in front of your vehicle and is the perfect combination of affordability and performance. The XL Sport uses Baja Designs' trademarked high-speed spot reflectors providing for a longer and wider beam pattern with four of our next generation LED technology that offers 3,162 raw lumens each. This makes the XL Sport the perfect auxiliary light for off-road vehicles such as trucks, vans, UTVs and motorcycles. All Baja Designs LED lights are backed by a 30-day satisfaction guarantee and their limited lifetime warranty for the ultimate in purchase protection. Product features: * Sold individually or in pairs (please specify when placing order) * The single light kits come with the mounting hardware only * The two-light kits include two pod lights, a wiring harness, and all necessary mounting hardware to get you up and running quickly * Housing material—hard anodized and powdercoated cast aluminum * Lens material—hardcoated polycarbonate * Bezel material—billet machined aluminum * LED lighting technology * Stainless steel mounting hardware * Built-in overvoltage protection * ClearView—all the light, right where you need it * CopperDrive—only LED driven at 100 percent * IP69K rated (waterproof up to 9 ft. and pressure washable) * IK10 compliant (Mechanical Impact Testing) * Exceeds MIL-STD810G (Mil-Spec Testing) Optic styles: * Driving Combo: Maximum trail coverage in a single light—the driving combo pattern is equipped with both driving and spot optics to provide you with a smooth blend of light for both near field applications in lighting zones 1 and 2 and distance in zone 3 * Spot: A longer and narrower 9-degree focus beam for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Cornering and/or Driving Combo beam lights * Wide Cornering: The wide cornering pattern offers a 42-degree flattened horizontal beam, reducing blind spots, and enhancing peripheral visibility in lighting zones 1 and 2—this cornering pattern is perfect for inclement weather such as dust, snow, rain, or fog conditions while also perfect for seeing obstacles on the trail, trail conditions, and potential hazards, making it easier to navigate through tight turns, winding trails, or through wooded areas
Not Yet Reviewed
$808.95
Designed with a spot, wide cornering (flood), or work/scene light pattern, Baja Designs S1 LED auxiliary light pods fill the shoes of a large light in a smaller package. S1s utilize a highly specialized reflector and LED combination to deliver 2,320 raw lumens, providing exceptional visibility whether you're off-roading, navigating through challenging terrains, or enhancing the aesthetics of your vehicle. Their compact size allows for easy installation within tight spaces for most any application in need of light, and their durable construction can withstand rugged environments, ensuring reliability in the harshest conditions. Baja Designs S1 LED auxiliary light pods are available in different housing colors and light patterns individually or in pairs that also include wiring harness. Choose the style and quantity to best suit your application. S1 LED light pods feature: * Hard anodized and powdercoated cast aluminum housing * Hard coated polycarbonate lens * Machined billet aluminum bezel * Stainless steel mounting hardware * Replaceable lenses and optics * Moisture Block protection—waterproof, rain proof, submersible * 5000K Daylight natural color—less drive fatigue * Only the black standard mount pods with "wide cornering" light pattern have an amber lens option. All other styles come with a clear lens only.
Not Yet Reviewed
$875.95
Enhance the forward-projecting light capabilities of your truck, SUV, Jeep, or UTV with Baja Designs XL80 A-pillar LED light kits. Each kit features Baja's XL80 LED off-road light pods with hard anodized and powdercoated cast aluminum housings, machined billet aluminum bezels, and hard coated clear polycarbonate lenses. A-pillar brackets, wiring harness, and stainless steel mounting hardware complete these kits. Some kits may include a wide/cornering and spot replacement lens so you can customize your light pattern. Choose the A-pillar kit designed for your vehicle.
Not Yet Reviewed
$988.95
Baja Designs dual S1 fog pocket light kits are the perfect mix of high-quality on and off-road performance. Available in clear or amber, the kits utilize the factory fog pocket location to pack two S1 lights on each side, offering 2,320 raw lumens per light at only 1.42 amps. These kits utilize the factory fog switch to operate the lower pair S1 lights, and the high beam function operates the upper pair of S1 lights. The included wiring harness is designed to be used in conjunction with factory light switches, and sPOD / Switch Pros units. If you're looking to add not only safety but lighting performance, this is your kit! Kit comes with: * (2x) S1 spot (clear) * (2X) S1 wide cornering (clear or amber) * (2x) Mounting brackets * (1x) Wiring harness 640117 * (1x) Trigger switch harness 640180 * (2x) Splitter harness * All necessary mounting hardware Additional notes: * uService: Replaceable lenses and optics * ClearView: All the light, right where you need it * MoistureBlock: Waterproof, rain-proof, submersible * CopperDrive: Safely driving LEDs at 100 percent * 5000K Daylight: Less driver fatigue, natural color
Not Yet Reviewed
$911.95
The Baja Designs S8 20 in. grill kits give you the ability to add a light bar—for those that have done the TRD Pro grille conversion. These kits allow you to maintain a low-profile appearance while maximizing the performance with Baja's 20 in. S8 light bar in a clear or amber driving/combo pattern, giving you 12,700 lumens of forward projected light. Additional details: * Ideal for a variety of late-model Toyotas * Replaceable lenses and optics * ClearView: All the light, right where you need it * MoistureBlock: Waterproof, rain-proof, submersible * CopperDrive: Only LED driven at 100 percent * 5000K Daylight: Less driver fatigue, natural color * NOTE: Does not work for TRD Pro Models. This kit is designed for TRD grille conversion of non-hybrid models with shutter assembly only. Grille NOT included.
Not Yet Reviewed
$751.95
—
$773.95
When you need an LED light bar that offers high-output LEDs with exceptional intensity, improved visibility, and safety in various conditions, the 20 in. OnX6+ LED light bars from Baja Designs are the perfect choice for those that demand the best in lighting. The OnX6+ has a race proven, Mil-Spec aluminum housing designed to withstand rugged conditions that off-roaders will endure. Vertical adjustments can be made and locked-in, offering the best beam pattern in front of the vehicle—no matter where it is mounted. Baja Designs includes a 30-day satisfaction guarantee and lifetime limited warranty, giving you the ultimate in purchase protection. Product highlights: * One 20-inch OnX6+ light bar with mounting brackets and hardware (wiring harness sold separately) * Aircraft grade aluminum with Mil-Spec hard anodize housing * Lens material—hardcoated polycarbonate * LED Lighting Technology * Lighting Modes: High beam/Low beam * Bezel material—billet machined aluminum * Stainless steel hardware * Customize your beam pattern or change damaged lenses without voiding the warranty on the OnX6+ with Baja Designs 'uService' technology * Built-in overvoltage protection * Installation of the OnX6+ is easy and comes with mounting brackets that can be used in any application * IP69K rated (waterproof up to 9 ft. and pressure washable) * IK10 compliant (Mechanical Impact Testing) * Exceeds MIL-STD810G (Mil-Spec Testing) Light pattern options: * Driving Combo: Maximum trail coverage in a single light—the driving combo pattern is equipped with both driving and spot optics to provide you with a smooth blend of light for both near field applications in lighting zones 1 and 2 and distance in zone 3 * Spot: A longer and narrower 9-degree focus beam for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Cornering and/or Driving Combo beam lights * Wide Cornering: The wide cornering pattern offers a 42-degree flattened horizontal beam, reducing blind spots, and enhancing peripheral visibility in lighting zones 1 and 2—this cornering pattern is perfect for inclement weather such as dust, snow, rain, or fog conditions while also perfect for seeing obstacles on the trail, trail conditions, and potential hazards, making it easier to navigate through tight turns, winding trails, or through wooded areas Note: The wiring harness P/N: 640115 is only applicable for the 10 in. to 20 in. OnX6+ light bars.
Not Yet Reviewed
$951.95
Baja Designs XL80 LED auxiliary light pods take your off-road lighting to the next level with 9,500 lumen. Similar to Baja's XL Pro model, the XL80 offers a 20 percent dimming feature, a powdercoated housing, and an anodized bezel. However, this is where the similarities end. The XL80 features very powerful LEDs for greater visibility and increased brightness. Each pair includes hardware, relay, and wiring harness. Additional details: * Replaceable lenses and optics * ClearView: All the light, right where you need it * MoistureBlock: Waterproof, rain-proof, submersible * CopperDrive: Only LED driven at 100 percent * 5000K Daylight: Less driver fatigue, natural color
Not Yet Reviewed
$865.95
—
$973.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
