Availability
On Sale
Whether you're relocating your headlamps or installing higher output bulbs, these headlight conversion harnesses will give you what you want--safely. They draw power directly from the battery, run it through a relay, and then to the headlights, providing full power and eliminating the chance of a short circuit. They're made with TXL high temperature wire and come with one weather-resistant 30-amp fuse and two 40-amp weather-resistant relays capable of handling up to 150 watts. They'll work on any 2-headlight vehicles using dual-filament sealed beams or H4 headlight conversions.
( 31 )
$151.99
—
$179.99
$136.79
—
$161.99
On Sale
Painless Performance courtesy light kits are designed to wire and install courtesy lights in your vehicle. A variety of kits are available to suit your needs. Light up your ride with Painless Performance courtesy lights.
( 27 )
$25.99
—
$49.99
$23.39
—
$44.99
On Sale
Painless Performance socket pigtail kits easily can be paired with one of their direct-fit square body harnesses (sold separately) to wire the exterior lighting on your single round headlight 1973-87 GM pickup truck. The kits include all of the pigtails, terminals, and connectors.
( 3 )
$65.99
$59.39
On Sale
Painless Performance headlight pigtail socket kits are quality replacement packages that include all the terminals and connectors you need to wire the exterior lighting on your 1980-87 square headlight GM pickup. They're available in applications to fit either the single or dual square headlights. GM pickup headlight socket kits can be paired up with a Painless Performance direct-fit square body harness (sold separately) to facilitate an easy installation.
( 1 )
$65.99
$59.39
On Sale
Lows off, highs on--Painless high-beam headlight relays change that. Since the 4-headlight system was introduced on GM trucks, owners of these vehicles have wondered why their low beams go off when the high beams are turned on. These Painless Performance relays will leave all four lights on in high-beam mode, which improves the intensity and spread pattern of your headlights.
( 70 )
$25.99
—
$39.99
$23.39
—
$35.99
On Sale
Painless Performance GM Suburban headlight pigtail socket kits are quality replacement packages that include the terminals and connectors needed to wire the dual square front-end on a Chevy or GMC Suburban truck. They can be paired with a Painless direct-fit square body harness (sold separately) to facilitate an easy installation.
Not Yet Reviewed
$99.99
$89.99
On Sale
Painless Performance Trail Rocker Jeep JK accessory control systems allow you to control up to eight accessories on your Jeep. They feature a waterproof housing that surrounds the power center with eight fuses and relays. Controlling that unit are five pre-wired switches mounted in your custom dashboard panel for a clean, factory look. The power center provides you with all necessary weatherproof connectors and wiring to control your Jeep accessories--from lights to air lockers.
( 7 )
$381.99
$343.79
On Sale
Oracle high performance 20 watt LED fog lights serve as direct-fit, high-powered replacements for several Jeep vehicle applications. These amazing LED units push out approximately 3,000 raw lumens to light up the night, on- or off-road—even in the worst trail conditions. Each light utilizes a rugged polycarbonate lamp housing to withstand impact, a solid-state luminaire design for vibration resistance, and epoxy-sealed electronics to avoid moisture and corrosion. Simply put, these lights are perfect for the off-road adventurer who wants to cover new ground on the trail that never ends. Features and specs: * Black bezel color * High performance Phillips ZES 5 watt LEDs * Optional Premium ORACLE Halo pre-installed; also available with no Halo * Halo color options: white, blue, red, green, or amber * Vertical adjustability * Advanced optics design for optimal visibility * Total 1,600 lumens light output * Precision beam "no glare" output * IP67 rated * Limited 2-year Oracle warranty Package includes: * Two Oracle high performance 20W LED fog lights * Two plug-and-play wiring adapters for installation
( 4 )
$193.00
—
$261.99
$173.70
—
$235.79
On Sale
Oracle 7 in. high performance LED headlight assemblies enable you to add the lights without any fabrication or cutting your factory wiring. The complete plug-and-play kits also feature vertical and horizontal headlight adjustment so you can put the light on the road (where you need it) and not blind oncoming traffic. This is the ultimate 7 in. LED replacement headlight option for Jeep Gladiators. The rugged solid-state LED design is perfect for the Jeep owner looking for high-quality lighting for better nighttime visibility without overpaying. Installation is very easy with the included Gladiator specific plug-and-play connectors. DRL halo colors are available in nearly a half-dozen options.
Not Yet Reviewed
$719.99
$647.99
On Sale
Oracle high-powered LED fog lights will give your vehicle a modernized appearance and improves night-time visibility at the same time. Designed for 2005-2007 Ford Super Duty truck applications and 2005 Ford Excursion models, these direct-fit high performance LED fog lights feature factory mounting and plug-and-play wiring connections for an easy, trouble-free installation. These amazing LED units push out approximately 1,500 lumens, which will vividly light up the road while only drawing 15 watt of power per light! The new rugged solid-state LED design can operate in the harshest conditions. Each light utilizes a durable PMMA lens and polycarbonate lamp housing to withstand impact. The solid-state LED emitters withstand shock and vibration, while the epoxy-sealed electronics help to prevent moisture and corrosion. Product Features: * Blacked-Out styling * Durable PMMA lens * Polycarbonate housings * Weather sealed electronics * Plug-and-Play connectors for an easy installation * 30 watt total power draw * 3,000 lumen total output
( 1 )
$193.00
—
$469.00
$173.70
—
$422.10
On Sale
Oracle LEDs are a great way to add street-legal awesomeness to your ride! Oracle offers many wallet-friendly replacements that will update the style and lighting performance of your vehicle. Their extensive selection includes exterior LED bulbs for headlights, fog lights, daytime runners, and turn signals—plus interior lights to illuminate your vehicle's look, inside and out. And, of course, LEDs are not only brilliant, but also emit very little heat and consume little power, so the awe-inspiring brightness will last longer without yellowing, hazing, or micro-cracking. The look is expensive and high-tech, but the price is affordable; let Oracle Lighting LED replacement bulbs brighten your world!
( 31 )
$7.85
—
$87.99
$7.06
—
$79.19
On Sale
KC HiLiTES Daylighters are the original performance off-road lights. They feature time-tested, tough off-road performance in classic halogen, or modern LED technology. KC HiLiTES Daylighters are available in a choice of housing materials with polycarbonate lenses in a variety of beam patterns to suit your Jeep, truck, and SUVs specific off-road lighting needs. They are offered in singles or systems that also include the iconic smiley face stone covers.
( 13 )
$124.99
—
$249.99
$112.49
—
$224.99
On Sale
Morimoto offers XB LED GEN II headlights for a variety of Chevrolet Corvette models from 2005 and up. Here are the differences; order the pair recommended for fitment on your specific car: *** Model MRI-LF2-778: Introducing the latest XB LED headlights for your C6 Corvette, now featuring a configurable DRL color in either white or amber, and your choice of turn signal flashing patterns via a plug-and-play key. With their LED Daytime Running Light, the switchback LED turn signal, and the high-output Bi-LED projector, all inspired by the modern look of the C8 Corvette headlights, not only are these the best way to modernize the style and performance on any C6 Vette, they're a perfect replacement for the worn out original headlights that you know are killing the look of your car! Product features: * Modern Design: Inspired by the C8 Corvette, stylish and contemporary * Signal Swap Keys: Enable users to personalize the operation of daytime running lights and turn signals via a plug-and-play key. The XB LEDs can be configured to run with white or amber daytime running lights and sequential or standard turn signals * Enhanced Visibility: Full LED DRLs and powerful Bi-LED projector for excellent brightness * Sequential Turn Signal: Stylish amber LED turn signal with a unique sequence * Durable Build: Matte/gloss black interior, UV-resistant lenses for long-lasting quality * Easy Install: Plug-and-play design, no modifications; perfect fit for original equipment * Includes: -- Headlights: 2x (one pair) 2005-13 Corvette C6 XB LED headlights (Gen II) -- Function Selectors: 8x (four pairs) for DRL and turn signal settings -- Wiring: 1x fuse tap harness, 2x magnet mount resistors *** Model MRI-LF779: The all-new XB Gen II headlights are packed with features that demonstrate Morimoto's true attention to detail. Fitted with the latest in technology, compliance, quality, and styling, the new C8-inspired headlights for the 2014-19 Chevy Corvette are designed for enthusiasts who are serious about all the above, even if it comes at a premium. The signal swap system allows users to personalize how the daytime running lights and turn signals operate according to personal preference, all through a simple plug-and-play key on the back of each headlight. The DRL can be configured to run full-time in either white or amber with no compromise in intensity either way. The turn signals can operate sequentially from side to side, or in a more traditional on-off mode with an elegant fade-off effect. The list goes on but as the saying goes: you get what you pay for. Morimoto headlights aren't the most affordable, but they're built to a high standard and should easily last the life of your Corvette! Product features: * Max Performance: The Gen II Corvette C7 XB headlights use high output Bi-LED projectors to create an incredibly bright and wide low and high beam for excellent visibility at night * DRL Optics: Easily outshine low-tech found in other aftermarket headlamps, while providing a one-off look with high output when viewed from any distance * Signal Swap: The DRL can be configured to run in either white or amber, while the turn signals can operate sequentially or in a more traditional on-off mode with an elegant fade-off effect * Start Up Sequence: When starting your Vette, the optics will automatically illuminate in a multi-stage sequence while coming to life * OE Fit and Installation: The XB Gen II headlights are expertly crafted to match all OE specifications to ensure perfect fitment and hassle-free install * Includes: -- Headlights: 2x (One Pair) XB LED Gen II Headlights -- Function Selectors: 8x (Four Pairs) For DRL and Turn Signal Settings
( 1 )
$1,699.00
—
$1,799.00
$1,359.20
—
$1,439.20
On Sale
Morimoto Sealed7 2.0 Bi-LED headlights are designed to replace 7 in. round/PAR56 lights and offers both low and high beam functionality, making them a versatile choice for various vehicles. With Nichia NCSW170C Series LEDs and Morimoto's Kuria Optic projector lens array, these headlight conversions deliver an impressive 3,000 lumens in low beam mode and a staggering 4,000 lumens in high beam mode. The quad-optic setup includes high-intensity white daytime running lights, low-intensity white DRL (with low beams on), and high-intensity amber turn signals with a convenient switchback feature. Built to last, the Sealed7 features UV-coated shatterproof polycarbonate lenses and heavy-duty die-cast housings that serve as efficient heat sinks. The PWM LED driver ensures consistent peak intensity even during extended use. With H13/9008 male inputs as standard, these headlights are tailored for modern Jeep Wranglers but can easily adapt to older models with an H4 adapter. Elevate your vehicle's lighting performance and aesthetics with Morimoto's Sealed7 2.0—truly a standout in the 7 in. round LED market.
( 2 )
$384.00
—
$609.00
$307.20
—
$487.20
On Sale
Upgrade your vehicle's rear-end with the brilliance of Morimoto XB LED taillights. These complete taillight assemblies swap directly in place of the originals, using all the stock mounting points and without any special wiring. They plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-and-play install. Plus, even though they look better than stock, they don't look out of place, flowing with the body lines of your vehicle and matching the OEM trunk trim. Morimoto XB LED taillights feature durable high-impact polycarbonate lenses to resist the test of time, looking new for many years to come. The housings are made of injection-molded ABS that is lightweight, strong, and IP67 waterproof. No doubt your original taillights look fine, but if you have upgraded the power, wheels, and tires, isn't it time for a high performance facelift on the rear of your vehicle, too? Morimoto offers the perfect choice in their XB LED taillights to complete your vehicle's new attitude.
( 8 )
$449.00
—
$1,400.00
$359.20
—
$1,120.00
On Sale
ARB Intensity V2 LED lights are specifically designed to meet the demanding requirements of off-roaders throughout the world. From producing white light that is the closest possible imitation of sunlight, to a virtually indestructible polycarbonate lens, these lights are the premium choice. Unlike high-intensity discharge (HID) lights, LEDs don't require time to warm up—and they perform brilliantly on corrugated roads by producing a broad field of light that helps diffuse vibration. Intensity V2 lights are available in different sizes and styles (flood, spot). Product features: * Submersible to 10 ft. * Compliant for radio interference suppression * Vibration-tested to military specs ensuring durability * Latest LED technology (OSRAM GIANTS) * Latest Hyperspot technology for spotlights * Flood light update for further spread
Not Yet Reviewed
$565.00
—
$844.00
$480.25
—
$717.40
On Sale
Morimoto X3B LED brake lights are the ones you've been searching for. They're no-compromise brake and bed lights offering the perfect blend of style, performance, and utility. Morimoto joins form and function with modern, jewel-like optics molded from optical-grade polycarbonate and fitted with powerful 3W LEDs wrapped up inside a piano-black polycarbonate housing. The high-intensity brake light setup is easily visible day or night, while the bed lights are purposefully designed to effectively illuminate your bed without dead spots. Morimoto X3B LED brake lights are easy to install, utilizing all the original mounting points to fit just like the factory model you're replacing and plugging into the stock harness. They are designed to comply with all DOT and SAE regulations for rear-facing lamps, and Morimoto offers coverage for all the most popular trucks. As a detail-oriented enthusiast, you can finally say no to stock, and yes to the modern style and performance of Morimoto X3B LED brake lights. Choose the lamps designed for your vehicle.
( 5 )
$234.00
$187.20
On Sale
Revolutionize your driving experience with cutting-edge lighting technology! Crafted after a year of relentless innovation, Morimoto 2Stroke 4.0 LED bulbs redefine clarity and safety on the road. They boast unparalleled beam quality, replicating the original optics pattern while reducing glare for oncoming traffic. With a slender 1.45mm emission surface, advanced PCB technology guarantees optimal performance. Achieve precise beam distribution with the filament-sized accuracy of the 2Stroke 4.0s, making every drive secure and well-lit. Their adjustable base accommodates diverse reflectors, and the built-in cooling system ensures longevity even in extreme conditions. Upgrade now and illuminate your journey with confidence. Order the replacement bulb style recommended for your vehicle. Additional details: * Designed and engineered by Morimoto in California, the 2Stroke 4.0 is packed with more patented, innovative features than any other bulb on the market today * Perfect Focus: The ceramic PCB and Osram HJL LEDs help illuminate the road more effectively, with zero glare to oncoming traffic * Heat Exchanger: Cools the bulb while warming the ambient temperature inside of the housing, increasing resistance to snow/ice buildup on the lens during the winter months * Designed and built with OE-grade materials
( 3 )
$120.00
—
$123.00
$96.00
—
$98.40
On Sale
Morimoto M LED 2.0 Bi-LED projector lights will redefine your expectations. Soon to set the benchmark in the retrofitting world, the M LED 2.0s deliver unparalleled performance, producing a hotspot brighter than its counterparts with optimal lumen distribution, packaged in a simple, clean design that installs easily. Every component, from the weather-tight grommets to the beautifully designed reflector bowls, exudes quality. Precision diecast and CNC-machined parts ensure a snug fit, rivaling the fit and finish of OEM projectors. For superior lighting without the complexities of traditional setups, select Morimoto M LED 2.0 projectors for your vehicle. Features and benefits: * Output advantage: -- Up to 83,000 peak CD -- ECE-sloped beam pattern ensures a sharp, wide, and colorful display * Distribution: The design maximizes visibility both straight ahead and to the sides, offering an unparalleled driving experience * Easy install: An extended threaded mounting shaft and a compact design, ensure a hassle-free installation process, and also incorporates a space-saving active-cooling fan and simplified wiring * Simplicity: A streamlined setup eliminates the need for separate bulbs, large ballasts, or complex relay harnesses. With only the projector and a small external LED driver, M LED 2.0s offer a clutter-free solution ideal for tight spaces.
( 1 )
$231.00
$184.80
On Sale
Diode Dynamics LED sidemarkers use OEM-grade retro-reflector optics, which provides reflective safety and a clean, premium appearance when off. They are designed directly from OEM CAD data for a perfect fit, and connector plugs that fit right into the factory socket. These replacements are loaded with hundreds of LEDs, for a modern and unique appearance that illuminates brighter than factory! Upgrade the styling and performance of your vehicle with Diode Dynamics LED sidemarkers. Order the application recommended for your specific make, model, and year. Features, specs and items may include: * OEM fit and finish with factory DRL housing * Available lens colors: smoked, clear (matches factory DRL and still has retro-reflector optics), red or amber (both DOT/SAE compliant) * Constant-current circuitry and transient voltage protection * OEM-grade optical reflector pattern and LED focal strip * Increased output, with full strip of LEDs * Sold in pairs or sets of four * Plug-and-play installation, no tools required * High-visibility output, much brighter than factory
( 9 )
$99.95
—
$399.95
$79.96
—
$319.96
On Sale
The Morimoto Super7 is the world's first high performance, fully modular Bi-LED replacement for the round headlights on the Jeep Wrangler. Nothing comes close to offering the same quality of light, the ability to customize the look, or the ease of assembly. Here are some product details: * Bi-LED: Unlike other options on the market that use reflector or generally inefficient multi-optic projector-based setups, the Super7 is designed around Morimoto's fantastic "M" Bi-LED projector. It's Kuria-Optic clear lens and curved cutoff shield produce a beam pattern that's supremely wide and well defined. Powered by a specially developed 25 watt CSP chipset from Seoul SemiConductor that's concentrated through a singular 3 in. lens, Super7 headlights will easily out-perform everything else in their class. * Form and Function: The aerodynamic design is purposeful to allow airflow to pass through the housing and cool the integrated heat sink at the rear—which is mated to the Bi-LED projector. Form indeed follows function, but it just so happens that form ended up a winner, too. * Modular: Because modifying Jeeps is about making them unique, the Super7s' modular design allows them to easily be customized. Want to add halos inside? Want to etch the projector lenses with something special? Want to color-match the housing to your Jeep? Go for it! Because they're easily taken apart without making a mess, it's awesome for those who want to customize. * Fitted: Super7 headlights are designed specially for use on Jeep Wranglers. Countless prototypes were produced, fitted to a JK, and modified until the end result was something that fits like a glove. Zero interference with any structural components behind the headlights. No need to relocate the airbag sensor. Directly compatible with the existing mounting rings and hardware. * Plug-n-Play: And flicker-free! There's no bulky/complicated relay harness to run for the Morimoto Super7 headlights. Just mount the external LED driver behind the housing, plug in the H13 or H4 connector to the factory outlet, and you're ready to roll.
( 3 )
$582.00
—
$583.00
$465.60
—
$466.40
On Sale
Scott Drake halogen sealed beam headlamps feature authentic Ford markings, along with upgraded halogen performance. Their design brings you an exact reproduction of the highly sought-after headlamps used on the classic Mustangs in the 1960s and '70s. The bulbs produce more than double the amount of lighting power of the factory tungsten bulbs, and provide increased driving safety, as well as your classic's original look. If you're in the process of restoring your ride, Scott Drake halogen sealed beam headlamps are a great addition.
( 25 )
$32.07
—
$34.45
$28.86
—
$31.01
On Sale
Morimoto XB LED license plate lights are well-built, have a virtually infinite life span, an unbeatable warranty, and out-perform other options—making them the best license plate lights on the market today. No doubt your original license plate lights look fine, but if you have upgraded the power, wheels, and tires, isn't it time for a high-performance facelift on the rear of your vehicle, too? Morimoto offers the perfect choice in their XB LED license plate lights to complete your vehicle's new attitude. With high-powered Osram LEDs behind the optical lens, they will be much more effective, both day and night, compared to the OEM setup. While the Morimoto LED License plate lights may cost a bit more relative to other options in the aftermarket, their fit and finish is far superior to everything else out there. No other brand blends performance, quality, and style quite like Morimoto does. Their vast product line covers today's most popular trucks and cars. So, what are you waiting for? Set your ride apart from the others on the road with these head turning license plate lights from Morimoto. Order the license plate lights for your application. Additional attributes: * Compliant with road safety standards * Available in different light colors and for specific vehicle models * Durable housings with UV-coated polycarbonate smoked lenses * High-quality, long-lasting LEDs * Makes license plate more visible * Designed to work without any modifications * Easy installation—simply plug into the factory connectors * No error codes, no flickering, hyper-flashing, or radio interference * Can easily be removed and will not void your factory warranty
( 5 )
$30.00
—
$56.00
$24.00
—
$44.80
On Sale
Oracle LED headlight bulbs enhance your ride with more than just great looks. These replacement bulbs emit almost zero heat and use less wattage to last longer! Oracle LED bulbs will outperform standard halogens and match the brightness of high-intensity discharge bulbs--while remaining cool to the touch. Each of these headlight bulbs has an IP65 waterproof rating, and they're also dustproof and shockproof. Oracle Lighting LED headlight bulbs are a brilliant choice for looks and performance!
( 8 )
$33.95
—
$248.50
$30.56
—
$223.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
