Availability
ZROADZ front roof LED light kits come complete with light, mounting brackets, wiring harness with fusible link, relay, switch, and all necessary hardware. The kits are offered with curved light bars, straight light bars, or roof top side-mounted pods. Packages are also available that combo light bars with top side-mount or A-pillar/hinge-mount pods for extreme auxiliary illumination. All ZROADZ light bars and pods have CREE LED chips, premium optics, and clean, crisp light output set in IP67/68/69 rated housings to provide extreme waterproof protection in off-road environments. ZROADZ front roof light kits feature laser-cut mild steel mounting brackets and a heavy-duty solid rubber gasket for a secure, watertight installation. Many of the roof brackets feature a patented through-bolt fastener that provides minimal exterior penetration and a convenient method to run wires into the cab without the worry of weatherstripping wind noise and leaks or other subpar wire routing methods. Choose the style and fit for your vehicle and order today from Summit Racing™.
Not Yet Reviewed
$474.50
—
$1,187.22
Baja Designs Squadron Sport/S8 40 in. light bar kits are a serious light setup for people who take playing in the outdoors seriously. The Jeep JL / JT Gladiator cowl mounts are the ultimate mounting option for anyone that wants versatility. This bracket can mount one pair of Squadron Series lights with a 40 in. S8 light bar. This package includes two Squadron Sports that each feature four Cree LEDs to produce 3,150 lumens at 26 watts to produce crisp, clear light that pierces the darkness and improves visibility in all conditions. If that wasn't enough, you also get a 40 in. S8 light bar. It pumps out 25,400 lumens of Cree LED power. It does so with a low amp draw to put less strain on your battery. A clean aluminum frame with scalloped housing, machined aluminum bezel, and stainless steel hardware protect the circuity from water or debris. The LEDs last nearly 50,000 hours while exceeding mil-spec testing for reliability, and the steel mounts are powdercoated to last the life of your Jeep. (NOTE: The cowl on the Mojave and 392 models is taller and requires longer M6 x 80mm flange bolts.) * uService – Replaceable lenses and optics * ClearView – All the light, right where you need it * MoistureBlock – Waterproof, rain-proof, submersible * CopperDrive – Only LED driven at 100 percent * 5000K Daylight – Less driver fatigue, natural color
Not Yet Reviewed
$1,595.95
Diode Dynamics Motorsports Stage Series light bar kits allow you to mount up to four 12 in. or 18 in. LED light bars on the hood of your vehicle. The whole kit includes everything needed for installation and uses stainless steel hardware for long-lasting durability—including custom-made stainless rubber bumpers, which absorb vibration and prevent any damage to the hood. These purpose-built brackets were CAD-designed to provide the performance you need to go faster and see further. With the modular design, you can adjust the setup and angling for your specific race conditions and preference. Each light bar is adjustable in output angle and position, and you can also adjust the brackets themselves to align with the contour of your hood. The Stage Series lineup also lets you swap out optics and amber or white colors. These kits are built for competition racing—specifically, night stage rally races. The LED auxiliary light bars have been engineered for maximum functionality, with compact size, custom-engineered TIR (total internal reflection) optics, and a wide flood pattern. Here's what comes with a complete light bar kit: * Full bracket set * Four SS12 12 in. or SS18 18 in. Stage Series light bars * One heavy-duty single-output relay harness * Two DT splitters * Four SS wide clear lenses * Eight 8 in.-32 stainless steel hex nuts * Four 8 in.-32 stainless steel hex screws * Eight quarter-turn 1500 Series spacers * Eight M6 custom-designed bumper feet * (24) M6 stainless steel flange bolts * (24) M6 stainless steel flange nuts * Installation guide
Not Yet Reviewed
$1,499.95
Rough Country LED upper windshield kit allows your UTV to "Command the Dark". These handy solutions include everything you need to upgrade your UTV with an LED light bar in the perfect, forward-facing position for off-road illumination. Features: * Up to 23,040 Lumens * Up to 288 watts * 8-degree spot/90-degree flood combo pattern * Easy, 100 percent bolt-on installation * IP67 waterproof design * Durable, diecast aluminum housing * Includes snap-on cover and premium wiring harness
Not Yet Reviewed
$329.95
Rough Country's LED hood light kits are offered in different lengths in their Black and Chrome Series lines. These awesome kits are easy to install and will upgrade your Jeep with a menacing look and incredible off-road illumination to "Command the Dark". Choose the one designed for your Jeep. Features: * 100 percent bolt-on installation * Does NOT interfere with washer nozzle or spray pattern * 30-degree spot beam * Contains 5-watt high-intensity Cree LEDs * IP67 waterproof rating * Durable diecast aluminum housing * Moisture Breather technology reduces moisture build-up behind the lens * Premium, flat-wound wiring harness with on/off switch * 3-year warranty
Not Yet Reviewed
$199.95
—
$269.95
Command the dark with one of Rough Country's LED bumper light kits. They provide a handy solution to upgrade your vehicle with a single or dual LED light bar mounted into the factory bumper for outstanding illumination. Order the LED bumper light kit for your application needs. Key features: * Handy, forward-facing illumination * Flood beam pattern * Easy, 100 percent bolt-on installation * IP67 Waterproof design * Durable, die-cast aluminum housing * Includes premium wiring harness
Not Yet Reviewed
$129.95
—
$269.95
Rigid Industries RDS-Series LED light bars are the apex of form and function. These linear light bars feature a curved design that fits the contours of your car, truck, or off-road vehicle for a sleek custom look. They have rugged extruded-aluminum housings and tough polycarbonate lenses to withstand anything the road throws at them. RDS-Series lights employ Rigid's Spot LED technology to maximize lighting capabilities so you can see off-road hazards. They're impact, vibration, and moisture-resistant, and a GORE pressure-equalizing vent prevents both air and moisture from infiltrating seals, preserving the seals' structural integrity. A plug-and-play harness, mounting bracket, and hardware are included. The world is curved--match it with RDS-Series LED light bars! Features include: * Emits a 10 degree cone of light from each LED--unmatched output for wider spread * Available in a variety of sizes, beam patterns, and colors * Certified IP-68 for water and dust intrusion * Certified to MIL-STD-810G for shock/vibration * UV and abrasion-resistant powdercoat * Custom 2-bolt mounting system for adjustability and strength * Unmatched output and efficiency
Not Yet Reviewed
$2,655.99
—
$2,780.99
ZROADZ front roof LED brackets are laser-cut from 3/16 in. mild steel and finished in a low-gloss textured black finish to complement your vehicle with strength and style. The brackets are available to mount LED light bars or pods (both sold separately) and feature ZROADZ's patented single through-bolt attachment and include a heavy-duty solid rubber gasket for a watertight seal. The patented thru-bolt fasteners provide a secure mount with minimal exterior penetration and a convenient method to run wires into vehicle cab without the worry of weatherstripping wind noise and leaks, or other subpar wire routing methods. Order the brackets designed to fit your application.
( 1 )
$414.50
—
$679.50
ZROADZ Prerunner Baja Bar kits enhance your vehicle's overall appearance and provide a functional forward facing mounting system for LED lights. Commonly called a Bull Bar, ZROADZ's aggressive forward design, oversized 2 in. tubing, and integrated LED mounting tabs easily transforms your factory bumper into a full custom bumper without the custom price. The main hoop is manufactured from high-strength mild steel tubing and welded to heavy-gauge base plates that bolt directly to your bumper. Installation is a breeze and accomplished by simply removing several bolts, installing the hoop, and reinstalling the hardware, that's it. ZROADZ Pre-Runner Baja Bars are finished in an all-black, low-gloss, textured powdercoated finish for durability and come standard with a Limited Lifetime Structural Warranty and 3-Year warranty on the finish. Complete kits include a Pre-Runner Baja Bar, two 4 in. high-powered LED lights in white or amber, and a wiring harness with relay and toggle switch.
Not Yet Reviewed
$524.50
—
$579.50
Clearance
ZROADZ front bumper top LED light kits are a quick and easy way to add forward facing lighting to your vehicle. Available with LED pods or light bars, these complete kits offer simple bolt-on installation utilizing factory bolt locations on the top of your bumper to provide significant auxiliary lighting without the worry of windshield glare or wind noise. Typical installation time is under 30 minutes and can be successfully installed using common hand tools by even the most casual enthusiast. ZROADZ light bars and pods have CREE LED chips, premium optics, and clean, crisp light output set in IP67/68/69 rated housings to provide extreme waterproof protection in off-road environments. Kits include brackets, wiring, relays, and hardware. Order ZROADZ front bumper top light kits for your vehicle and illuminate the night.
Not Yet Reviewed
$473.63
—
$789.50
Wolo Watchman 48 in. light bars have the latest features emergency responders require. With slim style, high-intensity linear LED clusters, improved optics that projects a wider light, and a unique inner magnifier that enhances brightness by 20 percent, these light bars will surely get everyone's attention. More importantly, Watchman light bars produce an ultra-bright beam of light that will be seen 360 degrees—even in bright daylight! A switch controller with state-of-the-art electronics operates the lights, and allows easy push-button control of 18 flash patterns, plus mode changes. Wolo Watchman light bars are also built to withstand all environments, with top and base plates of thick aluminum, and outer lenses of strong polycarbonate, which is waterproof and UV-stabilized. Additional features and specs: * Ultra-slim and low-profile * Models available with blue, red, amber, or blue/red linear LEDs * All models have clear lens throughout * Light bar switch controller with seven switches and LED display that shows flash pattern in use * Power, front light, rear light, alley light, take down, flash pattern, and traffic advisor switches * Illuminated power indicator above each switch shows when the switch is powered on * 16 linear (eight front and rear) LED modules with magnifying lens; each module contains six 1.5 watt LEDs * Alley lights have three 1.5 watt LEDs * 102 x 1.5 watt LEDs for 153 total wattage * Voltage: 10.8 to 13.8 VDC * Peak current: 5.5 amps with all LEDs on * Take Down lights: Two white LED modules 12 x 1.5 watt LEDs * Traffic Advisory: Three selectable amber patterns, back of light * Cable length: 20 ft. * Dimensions: L 47 in. x W 4 5/8 in. x H 3 3/4 in. * Adjustable universal mounting system, including stainless steel straps for window ledge mounting * Switch controller has an adjustable mounting bracket
( 1 )
$429.99
Grote Industries LED Traffic Director Warning Lights enhance safety with clear directional cues, durable, low-profile designs for versatile mounting, and energy-efficient LEDs for long-lasting performance. Key benefits include customizable flash patterns (arrow, center-out, warn) for directing traffic, a robust extruded aluminum construction, micro-processor control with brightness settings, and compliance with regulations for use in work zones and other high-risk environments. Select the model you'd prefer. Features and benefits: * Built with rugged, extruded aluminum that is resistant to warping and bending, ensuring long-lasting performance in challenging conditions * Durable polycarbonate lens * Ultra-low-profile design allows for mounting on various vehicle surfaces and in locations where space is limited * Uses efficient LED technology, providing high visibility with low power consumption and extended operational life * Micro-processor control unit offers four modes with distinctive flash options: left arrow, right arrow, center-out, and alternating 'warn' patterns * User-friendly design: features front-load replacement for individual modules and comes with a backlit control unit, attached quick-disconnect wiring harness, mounting L-brackets, hardware and instructions. Important Note: Traffic Director warning lights with date code prior to May 1, 2023, are only compatible with Grote's Controller 98522 and module 98533.
Not Yet Reviewed
$1,080.99
—
$1,427.99
Illumination is boundless with Wolo Infinity light bars. Their Infinity 1 models offer full size bars with powerful, unobstructed, 360 degree streams of halogen light. Their unique design emits dual-level warnings--five powerful rotating lights on the top and four secondary high-power flashing marker lights on the bottom. The top left and right revolving lights have diagonal mirrors between them for greater visibility, while the center light features a lighthouse lens to magnify and increase light produced. These maintenance-free light bars have lenses made of strong, optically enhanced polycarbonate and are replaceable. Rubber gaskets are built into the upper lenses to ensure a watertight seal to the light bases. Be seen at greater distances with Wolo Infinity 1 light bars. Wolo Infinity 1 features include: * Takedown lights * Left and right alley lights * Illuminated control panel with three rocker switches * Stainless steel mounting straps * 20 ft. power cable * Installation manual * Available with amber, blue, red, or blue (driver side) and red lenses
( 1 )
$419.99
Illumination is boundless with Wolo Infinity light bars. Their Infinity 3 models are full size bars utilizing state-of-the-art electronics and LEDs to deliver the next generation of high-tech warning lights. Their brilliance shines through 104 super-bright 1-watt LEDs with a continuously changing light pattern. Plus, their wide sweep provides better vision for true 360 degree visibility at greater distances--even in bright daylight. The Infinity 3 dual-level warning design puts the main LED warning lights on the top section and six flashing marker lights in the lower section. These maintenance-free light bars have lenses made of strong, optically enhanced polycarbonate with rubber gaskets built into the upper lenses to ensure a watertight seal. Wolo Infinity 3 features include: * Takedown lights * Left and right alley lights * Illuminated control panel with three rocker switches * Stainless steel mounting straps * 20 ft. power cable * Installation manual * Available with amber, blue, red, or blue (driver side) and red lenses
( 1 )
$599.99
Wolo On Patrol Gen 3 light bars are commercial-grade auxiliary lights ideal for use by emergency first responders, public safety workers, disaster volunteers—even on industrial construction projects. Designed with features not found in even the more expensive light bars, Wolo's field-proven microprocessor uses state-of-the-art electronics, has extremely low power consumption, and will provide years of reliable service. These roof-mount light bars feature a modular lens design that's waterproof and is made of strong polycarbonate plastic. The clear lens has been optically enhanced to produce an intense beam of light that can be seen 360 degrees—even in bright daylight! Wolo On Patrol light bars are offered in multiple lengths; order the application suited to your needs. Additional attributes include: * Operator has a choice of different advanced warning light patterns (as well as being able to control the alley and front-facing takedown lights on Wolo model 7800-A) * Switch control panel can be mounted to the vehicle's dashboard or console, using the provided double-face tape or mounting bracket (which is secured with screws) * Control panel is the command center for On Patrol light bars; it features an LED flash pattern indicator to show the operator the warning light pattern, alley lights, or takedown lights in use * Multiple illuminated buttons control the advance features, such as: warning light brightness, memorize a favorite light pattern, one-touch default to pattern 01, and more * Stainless steel universal mounting bracket straps secure the light bar to the vehicle's window ledge * All models have a clear lens throughout; color is produced by Gen 3 LEDs * Memory: When powered on, will resume the same light pattern as when powered off * One-touch control button for memorized favorite light pattern
Not Yet Reviewed
$898.99
Wolo Lookout light bars are high performance 12 V/6.5 amp GEN III LED light bars that can deliver an intense 360 degree light beam, with extremely low power consumption. Each unit offers 15 selectable warning light patterns and three advisory patterns for versatility. These light bars employ 88 amber 1-watt LEDs, a clear waterproof protective polycarbonate plastic lens, and a weather-resistant extruded aluminum frame. They're great for a high-power takedown and work equally as well in alley light modes. These light bars connect to a push-button panel with a 12 ft. cable. An adjustable, universal mounting system includes stainless steel straps for window ledge mounting, if desired.
Not Yet Reviewed
$866.99
Grote Industries LED tow bar light bars offer enhanced visibility, improved safety, and reliable performance due to their powerful LED technology, which delivers bright, wide-range illumination with lower power consumption and longer lifespans compared to traditional lights. Key benefits include exceptional durability in harsh conditions, quick activation, and integrated features like amber strobes and work lights for specific towing applications. These light bars are built with high-quality, corrosion-resistant components and are designed for reliability and long-term use in various severe weather and off-road environments. The LED tow bar light bars are available in several lengths, with or without SST and worklights. Choose the model best suited for your application needs. Key features and benefits: * Built to withstand extreme temperatures, heat, and cold, for long-lasting performance in tough conditions * Bright, wide-range illumination—the high-intensity LEDs provide superior visibility, especially in low-light or challenging weather conditions, making them ideal for towing, road maintenance, and off-road use * LEDs generate less heat than traditional bulbs, contributing to their efficiency and the longevity of the lighting system. * Ability to isolate extra bright front and rear amber LED modules with separate enable wires * Includes simple bracket for permanent mounting or optional gutter kits are available for various make and model vehicles * Built-in stop/tail/turn functionality with rear-facing work lights (select models) * Low-profile design * Customizable-selectable flash patterns
Not Yet Reviewed
$1,147.99
—
$1,418.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
