Availability
XK Glow LED undercar light kits are built with advanced design and chips. Each single color 24 in. light tube offers three light modes (solid color, 2 channel strobe, breath effect). These slim tubes have 18 SMD LEDs onboard, so they are much brighter and more durable than regular LEDs. All parts are protected with reinforced polycarbonate tubes and waterproof epoxy. Kits are not only available with undercar lighting, but also with undercar and interior lighting. The lights perfectly contour to your vehicle, forming a fascinating light show inside and out. Features and specs include: * Ultra-bright LEDs * Unique short tube design contours to your vehicle * Waterproof design * Max load: 40-piece 24 in. LED tubes (max 20 pieces on each output wire) * Brightness: Approximately 100 to 120 lumens * Three light modes (solid color, 2 channel strobe, breath effect) * 3M tape, zip-ties, drill bit, and mounting screws
Not Yet Reviewed
$83.99
—
$107.99
Clearance
Position your lights with Denali Electronics articulating bar clamp light mounts. Offered in several choices, these unique mounts feature an octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters. Each clamp comes with a fully rotatable mounting shelf that creates a super versatile and robust light mounting solution. They will fit engine guards, crash bars, frame tubes, handlebars, inner or outer fork tubes, or any tube within the clamp's specified diameter range on just about any 2- or 4-wheeled machine you're driving. Articulating bar clamp mounts features: * Billet aluminum construction * Available in anodized black or polished chrome * Adjustable grip range * Rotatable mounting shelf allows fourth axis of adjustability * Mount lights to shelf or directly to the clamp itself * Accepts M8 bolt from light pods * Kits include two clamps, two rotatable mounting shelves, and hardware kit
( 1 )
$115.99
$79.50
One of the greatest advantages of UTVs over ATVs is their built-in roll cage. It not only helps keep the occupants safe, but can be used for attaching accessories like ModQuad Racing horizontal end light bar mounts. These mounts attach to the horizontal tubes and allow you to position light bars where they'll work best. The two mounts will firmly hold one light bar, any size you like, up to the maximum width of the bar (light bar not included). Check the size of the roll cage material before ordering to pick the correct parts. When it comes to mounting lights or other accessories to your UTV, you can cut, grind, weld, paint, and be irritated if they aren't right. Or, simply unscrew the clamps on these ModQuad Racing horizontal end light bar mounts, place them around the bar, screw them back on exactly where needed, and be done. It doesn't get much easier than that.
Not Yet Reviewed
$85.99
These KC HiLiTES tubular bar light mounting brackets feature a 2-piece design made to fit tubular bars. They are manufactured from extra-strong glass filled nylon and include rubber adjustment shims for positioning. The brackets are available to fit a wide range of tubular bar diameters.
( 10 )
$56.99
Digi-Tails LED front marker conversion kits will dramatically enhance your front lights with high-intensity wide-angled LEDs that maximize light output—making your vehicle lights safer and brighter! These conversion kits include what you need to replace your old bulbs with superior lighting. Order the model designed for your vehicle application. Additional features and product details include: * Two high-intensity wide-angled LED light-panels * Terminals, connectors, and tubing * Accordion boots, glue, and installation instructions * Lamp lenses and housings are sold separately * Kits meet or exceed DOT and SAE requirements * Note: If LED front marker lights are the only LED lights you are installing, then you do not need an electronic LED flasher. If you are installing both LED taillights and LED front marker lights, two electronic LED flashers (not included) are required.
( 7 )
$99.00
—
$109.00
Baja Designs LED rock lights are waterproof and can be mounted virtually anywhere. All that is needed is 12-volt power. These LED accent lights have a 180 degree optic to illuminate your cab, engine bay, wheel wells—or anywhere else you need a bright and smooth light. Off-road driving can be somewhat difficult enough, even during the day, so why limit yourself to day driving? With Baja Designs rock LED lights, nighttime rock crawling can easily become a good time! Headlights are great for lighting up what is in front of you, but a great rock light is necessary for proper after-hours wheel placement. Baja Designs rock LED lights are available with lens color options and include tube mounts for installation. Important Note: Rock Light can get very hot when used for long periods of time. Please use caution when handling or installing.
Not Yet Reviewed
$66.95
Introducing Rough Country's chase LED light for your UTV—the ultimate solution to enhance both safety and style on your off-road adventures. Built with durability in mind, this add-on light offers reliable, multi-functional lighting that significantly improves rear-facing visibility, keeping you safe while on the move. Whether you're on the trail or cruising the streets, this product ensures you're seen, day or night. Each chase light is equipped with five different color options: dynamic amber strobe/chase light, white cargo/tag light, white reverse light, red running light, and red brake light. Switches are not included for easy customization and installation, allowing you to select the setup that best suits your needs and style. The chase lights double as a practical cargo or tag light with 168 Lumens of downward-facing LEDs. Illuminate your rig's cargo area for easy loading/unloading in low-light conditions, or brighten your license plate for better road visibility. Amperage draw: 0.7 amps ensures efficient power consumption, preventing system overloads. Tackle any terrain or weather conditions with confidence. These lights are IP68 rated, making them dustproof and waterproof for long-lasting performance. Installation is a breeze with multiple mounting options. The adjustable tube mount (1.75 to 2.00 in.) and universal 90-degree mounting option provide flexibility for any UTV setup. (Strobe function requires a separate switch for activation, allowing you to customize your lighting functions to your preference.)
Not Yet Reviewed
$79.95
Kuryakyn Pipe Wrench fork mounts ease the process of installing fork-mounted turn signals. The unique clamping system adjusts to fit various tube sizes (39mm up to 49mm) and accepts any aftermarket turn signals using an M8-1.25 threaded stud. The clamps feature cast aluminum construction with foam rubber lining to protect your forks. For modern design not typically seen on these type of clamps, order Kuryakyn Pipe Wrench fork mounts with your choice of chrome or satin black finishes.
Not Yet Reviewed
$76.99
Bright Earth light bar mounting brackets help you add auxiliary lighting above your windshield. Manufactured from steel with a durable black finish, these brackets include hardware and rubber spacer pads to protect your rig's paint. Installation is easy, too. The mounting brackets fit a variety of tubing diameters—and will work for 50 in. and 54 in. curved or straight light bars.
Not Yet Reviewed
$90.49
—
$96.95
Rigid Industries A-Series Low Power Lights are universal lights that can be used just about anywhere and throw out a whopping 200 raw lumens to help you see in the dark! Vehicle cabs, boat cabins, work vehicle beds, under hoods, or in trunks are just a few of the places where the A-Series can provide handy, bright lighting in otherwise dark places. They feature durable compact aluminum housings and include rubber, flat-mount, 3M VHB 2-way pads for flat-mounting, and radius tube-mount adapters, that provide side or bottom wire exits to accommodate different applications. They are lightweight, waterproof, and available in a variety of LED colors. The versatility of A-Series lights makes them an easy installation on almost anything.
Not Yet Reviewed
$101.99
Rigid Industries A-Series High Power Lights are universal lights that can be used just about anywhere and throw out a whopping 400 raw lumens to help you see in the dark! Vehicle cabs, boat cabins, work vehicle beds, under hoods, or in trunks are just a few of the places where the A-Series can provide handy, bright lighting in otherwise dark places. They feature durable compact aluminum housings and include rubber, flat-mount, 3M VHB 2-way pads for flat-mounting, and radius tube-mount adapters, that provide side or bottom wire exits to accommodate different applications. They are lightweight, waterproof, and available in a variety of LED colors. The versatility of A-Series lights makes them an easy installation on almost anything.
Not Yet Reviewed
$111.99
Oracle Off-Road Colorshift LED whips deliver outstanding color brilliance and illumination that can be changed to suit your mood with the push of a button. They are easy to install and can be used on ATV, UTV, and Off-road vehicles. Oracle LED whips utilize high-quality polycarbonate tubing for an increased resistance level and flexibility. They are available in two lengths. Shift colors, speed, brightness, and functions with Oracle Colorshift LED whips on your off-road vehicles. Specs and features: * Perfect for safety use * Weather and shock-resistant * Easily 2-wire 12 V connection * Input voltage: 10-30V DC * Lifetime: 50,000 hours * Waterproof rate: IP68 * Certification: CE, RoHS * Low current draw * Instant on/off * Warranty: 1 year Includes one each of: * ORACLE Off-road Colorshift LED whip * ORACLE logo flag * Quick-connect adapter * Wireless RF remote
Not Yet Reviewed
$130.99
Designed to be used with Jr. Dragsters only, JR Race Car Pro Billet taillights are one of the most rugged designs on the market today. They're the only taillights with a positive-acting switch to prevent shut-off from vibration. The housing has a universal clamping system and can be clamped horizontally or vertically on any 3/4 in. to 1 3/4 in. diameter tubing. If you are in it to win it, race with JR Race Car products!
Not Yet Reviewed
$58.86
—
$64.53
If you want the best performance from your LED light bar, you'll need a pair of Anzo LED light bar brackets. Anzo is an emerging leader in performance lighting technology and offers affordable products designed and tested to adhere to international quality standards. These LED light bar brackets are quality components that add a reliable mounting system to any vehicle—and are available for roof, hood, windshield frame, and tube mounting. They're offered in a variety of styles and for different vehicles and light bar sizes. Additional product details: * Laser-cut designs * Available in aluminum and steel * Natural and black powdercoat finishes * Designed and built for strength and durability * Weatherproof * One-year manufacturer warranty
Not Yet Reviewed
$64.99
Summit Racing™ rechargeable underhood LED work lights illuminate your project. They provide up to 1,500 lumens of light in a sleek, lightweight, wireless design that easily attaches to any hood up to 77 in. wide using padded hooks. The two independent work lights can be detached from the adjustable bracket for convenient hand-held use—or rotated on the bracket to give you light where it's needed most. These lights feature a battery level indicator and can be fully recharged in 4 hours using the included USB/wall charger. The LEDs have a lifespan of 50,000 hours and can be used in either a high or low beam setting. Storage is also made easy with the folding design that reduces the overall length to 24 inches. Step up to premium lighting with Summit Racing™ underhood work lights.
( 46 )
$100.99
KC HiLiTES dual Cyclone dome light mounts hold two Cyclone V2 LEDs, angled at 25 degrees for wide, functional interior illumination. Each cast aluminum housing has a compact wiring harness and an integrated amber halo push-button switch to deliver easy operation while remaining sealed and IP65-rated to withstand dust, mud, and water.
Not Yet Reviewed
$54.99
Clearance
Sunex Tools shop lights come in assorted styles and light power to fill a variety of needs. These LED lights offer features that allow for hands-free convenience and are powered by rechargeable lithium-ion batteries. Whether you need multiple brightness settings, the ability to get in tight spaces, or specialty lighting for working under the hood, Sunex shop lights will illuminate your project area with bright, long-lasting light.
( 2 )
$94.99
$69.50
KC HiLiTES pre-terminated relay wiring harnesses are designed to hook up any two KC lights. They include a rocker switch, a 40 amp relay, fuses, and mounting hardware.
( 3 )
$69.99
BACKRACK utility light brackets are available in styles to accommodate driver side, passenger side, or center mount light bars. All brackets are coated with a durable powdercoated finish, and all hardware is zinc coated for superior corrosion resistance. Whatever your needs, BACKRACK has the right light bar mounting accessories!
( 2 )
$59.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
