Availability
Denali Electronics DRL visibility pods are purpose-built to create the most light from the smallest, low-profile housing possible. DRL (daytime running lights) auxiliary lights are unbelievably bright—but will practically disappear once installed. The white or amber pods are compatible with a variety of mounting kits that enable the lights to be used as DRLs, turn signals, and backup lights. Choose between an offset mount, fender mount, or flush mount. Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart accessory controller or to any Denali 2.0-series wiring harness. When connected to a Denali 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.
Not Yet Reviewed
$72.99
Denali Electronics B6 brake light visibility pods are purpose-built to create the greatest amount of light from the smallest, most low-profile housing possible. The B6 brake lights are unbelievably bright, but will practically disappear once installed. Complete with an integrated run-brake circuit, the 3-wire B6 pods will run at 50 percent intensity on the red wire—and switch to 100 percent intensity via the orange wire. These pods are compatible with a variety of mounting kits that enable them to be mounted below a license plate, on the side of a license plate, or flush mounted onto any flat surface. Complete with a waterproof micro-connector and included posi-taps, the B6 third brake light assemblies are easy to connect into any vehicle's brake light circuit. The B6 also connects directly to the Denali CANsmart Controller—to enable programmable flash pattern braking and deceleration-activated auto brake light functionality. B6 is, simply, the brightest and most feature-rich auxiliary brake light on the market. Features: * Dual circuit: Running and brake * 180 degree viewing angle * Six high-power LEDs * Low 6 watt power consumption * Low-profile design
( 3 )
$72.99
Denali Electronics driving light mounts are offered in universal and vehicle-specific applications to better suit your specific needs. These powdercoated brackets assist in mounting any Denali driving light in the optimum position—be it a motorcycle, ATV, snowmobile, or Jeep. Order the model you need.
Not Yet Reviewed
$55.99
—
$109.99
Position your lights with Denali Electronics articulating bar clamp light mounts. Offered in several choices, these unique mounts feature an octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters. Each clamp comes with a fully rotatable mounting shelf that creates a super versatile and robust light mounting solution. They will fit engine guards, crash bars, frame tubes, handlebars, inner or outer fork tubes, or any tube within the clamp's specified diameter range on just about any 2- or 4-wheeled machine you're driving. Articulating bar clamp mounts features: * Billet aluminum construction * Available in anodized black or polished chrome * Adjustable grip range * Rotatable mounting shelf allows fourth axis of adjustability * Mount lights to shelf or directly to the clamp itself * Accepts M8 bolt from light pods * Kits include two clamps, two rotatable mounting shelves, and hardware kit
( 2 )
$92.99
Denali Electronics D4 LED lens kits are designed to maximize visibility in foggy and rainy conditions. Both amber and Selective Yellow lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. Choose amber to match your OEM turn signals, or Selective Yellow for even more daytime visibility to oncoming traffic. You could also use one of each to create a spot-hybrid that adds some additional close-range fill while maintaining distance. Order a TriOptic replacement lens kit for your Denali Electronics D4 lights to penetrate foggy, wet conditions. D4 LED lens kit - in the box: * 2 D4 spot lens for maximum distance * 2 D4 hybrid lenses for 50-50 True-Hybrid
Not Yet Reviewed
$58.99
Clearance
Denali Electronics fender light mount kits are purpose-built to secure their DRL and pod lights. The kits contain high-quality components that are simple to install, and allow you to position your lights ideally where you want on your motorcycle, ATV, or other 2- or 4-wheeled machine. They are also designed to not disturb the natural aesthetics of your vehicle. Select the Denali fender mount light kit that best suits your needs.
Not Yet Reviewed
$58.99
Denali offset light mounts are designed to mount a pair of Denali DRL or B6 visibility pods to the side of any M6 mounting point on your vehicle. The pair of powdercoated steel brackets create the ideal mount for tucking DRLs up inside your motorcycle's fairing. Offset mounts can also be used to position B6 brake light pods to the side of your license plate. In the box: * 2 offset mounting brackets * M6 hardware kit * Wiring splitter * 3 Posi-tap connectors
Not Yet Reviewed
$109.99
United Pacific LED sequential taillights take your rear-end illumination to another level. These lights contain super-bright red LEDs with fully sealed epoxy coated electronics. A selector switch enables you to control the sequential function moving left, moving right, or off. The taillights also feature a brake attention option with a sequential-once function. (Some models require the use of United Pacific LED turn signal flasher, item number 90652 or 90649.) Most taillights include double connector with offset pins and will plug into your existing tail lamp socket. Add some style and 21st century pizazz to your vehicle with stunning sequential taillights.
( 12 )
$52.99
—
$76.99
United Pacific sequential LED taillight assemblies feature super bright LEDs set behind a polycarbonate lens. These taillight assemblies have a selector switch to control sequential on/off function. They also feature a brake attention option with sequence-once function. Order the taillight assembly to fit your make and model vehicle—once installed, there's no doubt you'll get noticed! Additional features include: * Available to fit the driver or passenger side of vehicle * Epoxy coated, fully sealed electronics to keep housing unit free of debris and moisture * Energy efficient solid-state circuit board engineered for 12 V DC systems * LED license plate illuminator lens on bottom (on some models)
( 29 )
$52.99
—
$100.99
United Pacific LED parking lights can increase vehicle visibility with a brighter and more intense light output. With their solid-state construction, these LEDs are virtually impervious to shock and vibration. An epoxy seal provides LED diodes and electronics with complete protection from moisture and corrosives, and their polycarbonate lens resists impacts and collisions much more than acrylic plastic models. These LED parking lights are available in a choice of styles and lens colors to complement the look of your vehicle and are DOT/SAE-compliant.
( 19 )
$52.99
—
$76.99
United Pacific LED taillight assemblies offer quality-built modern innovation and design for your classic restoration. United Pacific light emitting diodes draw less from your car's electrical system, light up in microseconds, have no moving parts or filaments to break, and operate well in extreme temperatures. These LED taillight assemblies provide solid-state circuit boards, epoxy-coated fully sealed electronics, polycarbonate lenses, and--depending on your application--die-cast housings, rings, or bezels. A choice of lens and housing colors is available. Installation is as easy as removing the old and plugging in the new! Get brighter, more intense output to warn those behind you with the increased visibility of United Pacific LED taillight assemblies added to your classic.
( 2 )
$67.99
Digi-Tails LED front marker conversion kits will dramatically enhance your front lights with high-intensity wide-angled LEDs that maximize light output—making your vehicle lights safer and brighter! These conversion kits include what you need to replace your old bulbs with superior lighting. Order the model designed for your vehicle application. Additional features and product details include: * Two high-intensity wide-angled LED light-panels * Terminals, connectors, and tubing * Accordion boots, glue, and installation instructions * Lamp lenses and housings are sold separately * Kits meet or exceed DOT and SAE requirements * Note: If LED front marker lights are the only LED lights you are installing, then you do not need an electronic LED flasher. If you are installing both LED taillights and LED front marker lights, two electronic LED flashers (not included) are required.
( 7 )
$99.00
—
$109.00
United Pacific LED taillights offer brilliant quality, innovation, and safety for your restoration. Rated for over 100,000 hours of operation, these taillights afford you many super-bright lights covered with impact-resistant polycarbonate lenses. All models feature solid-state construction and are epoxy coated. This makes them impervious to shock and vibration, while protecting LED diodes and electronics from moisture and corrosion. Installation is easy—simply plug them in! Light emitting diodes draw less from your car's electrical system, light up in microseconds, have no moving parts or filaments to break, and they operate in extreme temperatures. They're available in more than 100 variations for fitment on countless applications.
( 96 )
$50.99
—
$102.99
J. W. Speaker 770 XD LED work lights deliver high-quality electronics and optics in smaller packages. These powerful, slimmer lights feature polycarbonate housings and lenses for maximum protection. J. W. Speaker 770 XD LED work lights come with universal mounts and are available in different DC options, connectors, and multiple beam patterns.
Not Yet Reviewed
$87.48
—
$105.60
What do you get with United Pacific LED parking light assemblies? You get super-bright LEDs to increase visibility with a brighter and more intense light output. With their solid-state construction, these LEDs are virtually impervious to shock and vibration. An epoxy seal provides LED diodes and electronics with complete protection from moisture and corrosives, and their polycarbonate lens resists impacts and collisions much more effectively than acrylic plastic models. These complete LED parking light assemblies include the bezel and housing with a socket and wires--everything needed for the installation.
( 5 )
$61.89
—
$76.99
Oracle S3 LED conversion headlight bulbs instantly provide 3,200 lumens of crystal-clear 6000K light output. The electronic components of these S3 bulbs are housed in a sealed waterproof heat-sink design, eliminating the need for external drivers and cooling fans. A CSP (Chip Scale Package) LED chip design features a small package size, but high-intensity volume per unit with less heat value—resulting in industry-leading luminous efficacy. Oracle S3 LED conversion headlight bulbs' new low-profile design reduces common bulb fitment issues for an easy plug-and-play installation.
( 4 )
$88.65
—
$90.95
Oracle 5.75 in. 40 watt replacement LED headlights are built to operate in the worst possible conditions. Being excellent replacement options for any 5.75 in. sealed beam lamps, they feature rugged diecast aluminum housings with polycarbonate lenses, solid-state luminaire design for vibration resistance, and epoxy-sealed electronics to avoid moisture and corrosion. Oracle replacement LED headlights are perfect for the off-road adventurer who wants to cover new ground on trails that never end. Features and specifications include: * Available with chrome or black bezel * H4 plug * Low beam lumens: 2.550 * High beam lumens: 3,400 * Low beam wattage: 30 * High beam wattage: 40 * 10 to 32 V DC * Color temperature: 6,000K * Lifetime: 30,000 hours
Not Yet Reviewed
$107.99
United Pacific offers LED turn signal and parking lights in a choice of styles, as well as bulb and lens colors. These lights feature super-bright LEDs, a polycarbonate lens, and epoxy coated, fully sealed electronics. United Pacific LED turn signal and parking lights are designed to fit in place of your ride's original lens. Mounting clips are included.
( 8 )
$54.99
—
$61.99
Clearance
Rigid Industries D-Series mounting brackets allow you to mount your D-Series LED lights below the windshield. They are made of high-quality stainless steel and powdercoated black. Patented hybrid and specter systems, along with state-of-the-art electronic technology, make Rigid Industries LED products second to none. These easy-to-install Rigid Industries D-Series mounting brackets are exactly what you need to add some LED lights to your ride.
Not Yet Reviewed
$149.99
$72.99
—
$92.99
Get enhanced performance, simplified installation and improved durability with J.W. Speaker 783 XD LED work lights! These light bars have thermally conductive polycarbonate housings, upgraded electronics, and brilliant long-lasting LEDs. They are also impact and corrosion-resistant, while their low-profile design allows for easier mounting. The 783 XD LED work lights are available with different flood beam patterns and include mounting brackets.
Not Yet Reviewed
$98.26
—
$98.44
Wolo Lightning Bright strobe lights are multi-voltage, single-flash strobe lights that produce a significant 1.75 joules with 60 to 80 flashes per minute. They have a replaceable Fresnel amber lens that is made to be watertight, along with electronics that are sealed in rock-hard epoxy to withstand all weather conditions. Wolo Lightning Bright lights are designed for permanent surface mounting, and all required hardware is provided.
Not Yet Reviewed
$62.99
Hagan Street Rod Necessities third brake light kits are available with a variety of lens sizes and shapes, including rectangular, oval, or single-slot lenses. The light kits are designed to be mounted into the body, sanded down, and polished to be flush with the body. Hagan Street Rod Necessities is dedicated to providing quality parts for the guys and gals that love to customize their rides. Features include: * Stainless steel housings * Electronic LED strip or strips * Super bright red LEDs (number varies with size) * Additional lenses in a variety of sizes and shapes sold separately * T-bolts hold housings in place
( 2 )
$95.00
Are you tired of being in the dark? These lamps' electronics are completely encapsulated with durable epoxy for maximum environmental protection. Their connections can be easily adjusted for typical installations. Grote designed these lamps for bus electronics. Grote manufactures these lights from quality materials to ensure performance and durability.
Not Yet Reviewed
$73.99
Grote Industries material handling strobe lights flash 80 times per minute, making it easier for others to see you approaching. Grote designed these strobe lights with a thread-on lens for easy access and maintenance. Grote manufactures these lights with the electronics sealed in epoxy to protect against dust, moisture, and vibration. They come available in red, yellow, and blue lenses.
Not Yet Reviewed
$107.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
