Availability
Your vehicle might come with nice LED accents, but what good are they if you can't show them off? Diode Dynamics Always On modules allow you to power your lighting more often—such as running a DRL at low power when it's dark, or keeping fog lights or parking lights on during the day. Keep your style day or night with Diode Dynamics Always On modules! Order the kit designed for your make and model.
Not Yet Reviewed
$59.95
—
$79.95
The Diode Dynamics S1 Switchback modules are a 12 V LED switchback controller in a waterproof, low-cost package! With an input range of 9-16 V and common ground, they are perfect for any automotive application, and they can be used for turn signal applications, DRLs, and more! Features: * Waterproof and shockproof, with full encapsulation * 12 V application * Used for turn signal and DRL functions * Turns lights into DRLs or turn signals * A maximum current of 2 amps on the white channel, and 3 amps on the amber channel * Male Spade Connectors with T-Taps for installation * 3-wire set up for Ground, White DRL and Amber turn signals * Perfect for the retrofitter or do-it-yourselfer looking to create an OEM-style function with a few 12 V LEDs * Designed and assembled in the USA by Diode Dynamics Manufacturing Input: All input wires are male spade connectors with T-taps for installation—there are three wires for input: black, yellow, and white. -- Black: Ground wire which should be connected to a constant chassis ground -- White: Static wire or running light input -- Yellow: Turn signal input—this will also shut off the static output, so it could be treated as a shutoff wire for DRL applications Output: All output wires are bare leads for connection to LEDs. There are three wires for output: black, yellow, and white. -- Black: Extra ground output—this does not need to be connected as it is an extra ground point, you can connect LEDs to ground here, or anywhere on the chassis -- White: Static output—when power is applied to static, and the turn signal is not activated, and it will output 12 V of power—for example, you might connect this to a white light to act as a running light -- Yellow: Turn signal output—you might connect this to an amber or red LED to become a turn signal—the static output will shut off, switchback style, while the turn signal is running; if you are using the Turn Wire as a shutoff, just leave this wire disconnected
Not Yet Reviewed
$24.95
Diode Dynamics Tail as Turn modules are plug-and-play units that illuminate your main tail lamps as both brake and turn signals. Now you can put your modern LED tail lamps to full use, and eliminate the incandescent turn signals for a much cleaner look on the road, day and night. Diode Dynamics Tail as Turn modules are made with OEM-size connectors for many Subaru, Infiniti, Nissan, Hyundai, and Toyota models. They also offer DIY modules for vehicles they have not made kits for yet.
Not Yet Reviewed
$49.95
—
$79.95
Diode Dynamics Tail as Turn plus backup modules can add much more visibility when putting your car in reverse. These plug-and-play units not only illuminate your main tail lamps as both brake and turn signals, but also permit you to convert the old turn signal socket to an extra backup light. Put your modern LED tail lamps to full use and eliminate the incandescent turn signals for a much cleaner look on the road, plus have the option of extreme reverse lighting with Diode Dynamics Tail as Turn plus backup modules. They are made with OEM-size connectors for many makes and models. Order the kit designed for your vehicle.
Not Yet Reviewed
$79.95
—
$119.95
If you're looking to get extra attention, sequencing lights are the way to do it. Diode Dynamics Mustang sequencers are plug-and-play modules that add sequencing features to your existing taillights—and not just for turning, but for all functions, including brake, hazard, and locking/unlocking the vehicle. They use automotive-grade solid-state switches, so they can provide reliable, unique style for years to come. Features: * Custom appearance * Easy installation. Using OEM taillight connectors, these kits are 100 percent plug-and-play and install in minutes, with no wiring required. The actual installation time is less than 5 minutes per side, and you don't even have to remove the taillights. * Reliable operation. Modules are designed with quality components, custom-tooled OEM-grade connectors, and include embedded circuit protection, for high reliability over time.
Not Yet Reviewed
$79.95
Diode Dynamics Bluetooth RGBW M8 controllers offer full multicolor control and a True White selection for crisp, clean white output for everyday driving. The controllers provide 20 adjustable patterns, plus custom modes, camera match, and audio sync. With the Diode Dynamics multicolor app, you can of course choose any color under the sun, including True White. There are preset patterns too, including strobe, fade, and more. Preset Colors make RGBW M8 controllers easy to use, and the fun features like Camera Match and Music Sync make it fun to show off! Don't see a pattern you like? Just program your own and save it for later. Plus, M8 controllers will light up immediately to the previous setting when they get power, no need to access the app. For instant control, instant response, and excellent user experience, Diode Dynamics Bluetooth RGBW M8 controllers should be your first choice for vehicle lighting. Features and specs: * Easy plug-and-play input and output connectors * Fully waterproof and shockproof compact polycarbonate enclosure * Robust M8 output connectors for secure connections * Red indicator LED to confirm proper power * Mounting tab and pad surface for easy mounting * Purpose-built for automotive LEDs * Prevents flickering and "bulb-out" warnings * 9 to16 V input, Deutsch DT (hookup pigtail included) * Common-anode output, M8 connector, +GRBW * Requires newer iOS or Android device (Bluetooth 4.0+) * 8 amps total capacity (2 amps per channel)
Not Yet Reviewed
$59.95
—
$99.95
Diode Dynamics Multicolor DRL LED boards are direct replacements for your factory LED boards. These computer-designed circuit boards convert the white "halo" LED accent inside your vehicle's headlights to illuminate in any color for a cool custom look. And, unlike other RGB products on the market that produce a mixed white color, Diode Dynamics LED boards are RGBW, with independent white LEDs—so after you have fun with colors, just select True White for a crisp, clean white LED output for everyday use. Diode Dynamics Multicolor DRL LED boards are available for a wide variety of vehicles. Order the DRL LED board recommended for your specific make, model, and year. Features, specs, and items may include: * An RGBW controller is required for operation (not included, sold separately) * Smartphone control with optional Bluetooth controller * OEM-grade solution; direct replacement for factory LED board (CAD-designed with identical mounting points and shape for perfect fitment) * Adds RGBW multicolor and sequencing function to daytime running lights * Preset color feature makes it easy to use, and fun features (like Camera Match and Music Sync) make it fun to show off * 2 Epistar LEDs in place of each original white chip * 2 sets of LED multicolor boards—one for each side of vehicle * 2 waterproof, constant-current inductive drivers included to drive high-power LEDs safely * A solid-state relay module activates LEDs from two independent factory signals, without flickering or errors, and draws power from battery, while still using factory signals * One fused battery connection wire, with T-taps * Constant-current, high-power driver modules * Not compatible with aftermarket (non-factory) headlamps
Not Yet Reviewed
$139.95
—
$439.95
Diode Dynamics C-Light Switchback LED Halo kits are designed to replace the factory bulb or single LED, illuminating with a much higher intensity. The C-Light LED modules fit right behind the factory diffusing reflector, illuminating in an extremely bright white, as well as brilliant amber. With proprietary high-density "HDLED" technology, these modules are populated with over 500 LED chips, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When lights are turned off, the diffusing gel hides the chips for a clean, OEM appearance. Diode Dynamics C-Light Switchback LED Halo kits are available for a wide range of vehicles. Order the kit recommended for your specific vehicle make, model, and year. Features, specs, and items may include: * Custom-designed LED circuit board modules fit select WRX/STi headlamps * Modules light in pure 6000K white color, not cool blue like cheaper products on the market; and because they use modern high-power amber chips (rather than traditional LEDs), the amber is even brighter than the white * Constant-current power * With embedded micro-controller, the drivers utilize multi-stage PWM dimming to allow for a half brightness to white for use at night (parking lights, as well as a full-power white for use as daytime running lights) * Amber LEDs run at even higher power, making turn signals easily visible in broad daylight * 2 custom-shaped LED halos (left side/right side) * 2 waterproof, constant-current inductive driver units * 2 input wire pigtails * 8 T-tap input connectors * Wiring instructions and installation guide included
( 1 )
$179.95
Diode Dynamics multicolor Demon Eye kits add full multicolor functionality, plus pure white for everyday use to your factory projector housings. They include an input wire for connecting to your factory signals, lighting up for lock/unlock and daytime running lights (DRL). These kits can be installed without having to open/bake open your headlamps! While the headlights still need removed, actual installation time for the Demon Eye brackets is typically less than 10 minutes per side. Enhance the accents on your Mustang with the multicolor functionality of a Diode Dynamics Demon Eye kit. Features and items: * Computer-designed for easy installation with specific brackets for the 2015-17 Ford Mustang headlights * Full RGBW multicolor with independent white LEDs—unlike other RGB demon eyes that produce a mixed white color * Converts the projector inside your Mustang's headlights to illuminate in any color for a unique, custom look. * Adds an LED to shine light onto the projector lens * App control—choose any color under the sun, with the Bluetooth RGBW controller * Patterns include strobe, fade, and more * Preset colors, camera-match, and music sync make them fun to show off * Demon Eye brackets (left and right side) * 2 Pro Series Demon Eyes with drivers * Bluetooth RGBW controller * 2 Phillips head screws * T-taps and dual input module * Installation guide
( 2 )
$199.95
What's a fourth brake light? At Diode Dynamics, that's what they call an additional brake light, usually mounted lower on the vehicle in an existing lamp housing. It's not too different than the rear fog lamps found in Europe, and their kits provide a unique accent, with extra visibility on the road. Diode Dynamics 2015-23 Ford Mustang 4th brake lights are the ideal solution to give your vehicle a custom appearance with functionality. These kits convert your factory reverse light to shine both bright white and red. Not only do you get an upgraded backup light, but you can also add a red running and brake light, for a unique, modern look on the road. Easy to install, each kit utilizes OEM connectors and wiring harness for a plug-and-play installation that takes minutes, while the embedded circuit protection provides reliable operation. A module, wiring harness, 3157 red/white switchback bulb, and mini screwdriver are included in each kit. Features: * Red running light: The red light comes on at 50-percent brightness anytime you have your parking lights or headlights on, to serve as a rear fog lamp. This provides a distinct appearance at night, complementing the factory LED taillights * 4th brake light: When you hit the brakes, the red light powers at full brightness, to serve as a supplementary brake light, for greater visibility and a unique look * White reverse light: Anytime you're in reverse, the red shuts off completely, so your backup light can illuminate in a crisp, white color. There is no change to the factory reverse function, you just get an improved output from the white LED.
Not Yet Reviewed
$79.95
Clearance
Diode Dynamics SL1 LED bulbs provide a true upgrade in performance with their compact size, optically correct output, and high reliability. The Lumileds chips shine in a true white 6,000K color temperature without any hint of blue for an OEM-style appearance. SL1 LEDs are designed to shine light just like your original bulbs, which improves their capability to preserve the focus and hotspot of the lamp, with no added glare. Diode Dynamics SL1 LED bulbs are engineered for performance. Order the pair designed to fit your vehicle. Features and specs: * Tested using photometric test equipment to measure the entire beam pattern * 30 to 70 percent more focused light in the primary hotspot test point, effectively shining more light down the road with no added glare * Simple plug-and-play installation—fits where other bulbs won't: under dust caps, and in tight spaces with no modification and no hanging metal straps * Every part of the the SL1 was designed for reliability, from the high-temperature PTFE wire, to the zinc castings * Driver uses a unique boost-mode circuit, which prevents thermal imbalance in the LEDs and has transient protection for long life in automotive circuits * Ran through dozens of thermal cycles inside environmental testing chambers, from -40 to 150 degrees C, plus vibration and electrical transient voltage to ensure long life
Not Yet Reviewed
$249.95
$189.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
