Diode Dynamics Lights & Lighting - Kits KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Diode Dynamics C-Light Switchback LED Halo Kits

Diode Dynamics C-Light Switchback LED Halo kits are designed to replace the factory bulb or single LED, illuminating with a much higher intensity. The C-Light LED modules fit right behind the factory diffusing reflector, illuminating in an extremely bright white, as well as brilliant amber. With proprietary high-density "HDLED" technology, these modules are populated with over 500 LED chips, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When lights are turned off, the diffusing gel hides the chips for a clean, OEM appearance. Diode Dynamics C-Light Switchback LED Halo kits are available for a wide range of vehicles. Order the kit recommended for your specific vehicle make, model, and year. Features, specs, and items may include: * Custom-designed LED circuit board modules fit select WRX/STi headlamps * Modules light in pure 6000K white color, not cool blue like cheaper products on the market; and because they use modern high-power amber chips (rather than traditional LEDs), the amber is even brighter than the white * Constant-current power * With embedded micro-controller, the drivers utilize multi-stage PWM dimming to allow for a half brightness to white for use at night (parking lights, as well as a full-power white for use as daytime running lights) * Amber LEDs run at even higher power, making turn signals easily visible in broad daylight * 2 custom-shaped LED halos (left side/right side) * 2 waterproof, constant-current inductive driver units * 2 input wire pigtails * 8 T-tap input connectors * Wiring instructions and installation guide included

5.0 out of 5 stars ( 1 )

$179.95

Diode Dynamics Switchback HD Halo Kits

Diode Dynamics Switchback HD Halo kits are known for long-term reliability and quality. While LED halos and strips are nothing new, Diode Dynamics are the only products tested to SAE and DOT photometric and environmental standards. Whether you're in northern Canada or the Arizona desert, LED Switchback HD Halos will keep running. They are also designed for automotive use, not just re-purposed residential lights. With transient voltage suppression and protection features, these Halos will keep running for years in harsh automotive electrical systems. Switchback LEDs also offer the added benefit of dual amber/white lighting in the same halo! They can be wired as turn signal indicators, running lights, or simply a switched light. Choose from a wide range of universal versions or model-specific fitments.

Not Yet Reviewed

$44.95

—

$274.95

Diode Dynamics HD Halo Kits

Diode Dynamics HD halo kits are known for long-term reliability and quality. While LED halos and strips are nothing new, Diode Dynamics are the only products tested to SAE and DOT photometric and environmental standards. Whether you're in northern Canada or the Arizona desert, Diode Dynamics LED HD halos will keep running. With transient voltage suppression and protection features, they will keep running for years in harsh automotive electrical systems. Available in a wide range of universal versions or model-specific fitment.

Not Yet Reviewed

$49.95

—

$274.95

Diode Dynamics Sequential LED Turn Signal Harnesses

Diode Dynamics sequential LED turn signal harnesses allow you to power your Diode Dynamics sequential LED turn signal as a daytime running light. These 22 AWG harnesses provide power to your turn signal lamp to produce a clear, bright white light when the headlights are not on, providing added exterior styling. Diode Dynamics sequential LED turn signal harnesses (pair) are designed for use on 2015-17 Ford Mustangs.

Not Yet Reviewed

$39.95

Diode Dynamics SS3 Sport LED Fog Light Kits

The Diode Dynamics SS3 Sport LED Fog Light kits are the best bang for your buck upgrade for your ride. Each light features a custom molded mounting bracket, plug and play design for quick install, and specially engineered optics. Wire adapters are included to connect the lights to your factory bulb sockets with no additional wiring needed. The TIR optic in the SS3 LED lights serves as both the optic and main lens for greater efficiency and light output. Thanks to this innovative feature the total intensity of the SS3 is much greater than other LED pods. The lights are available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. SS3 Sport light kits come in multiple light patterns and power levels. The Driving pattern is designed to supplement your high beams, but it's great for general illumination as well. Rather than a traditional "spot" pattern, the Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds. The Fog pattern provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory fog lamps and will fully illuminate the area in front of your vehicle. When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. The SS3 Sport LED light kits are available with a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function. The SS3 LED fog light kits are available at three different power levels, Sport, Pro, and Max. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses high-intensity LEDs, and is the best bang for the buck you'll find. The Pro model steps things up in a big way, with double the total power. Finally, the Max model is designed with cutting-edge automotive emitters, for both high power and extreme intensity.

Not Yet Reviewed

$379.95

Diode Dynamics SS3 Max LED Fog Light Kits

Diode Dynamics SS3 Max LED fog light kits are the ultimate upgrade for your ride. Featuring cutting-edge lighting technology, they'll light your way with authority. Each light features a custom molded mounting bracket, plug-and-play design for quick install, and specially engineered optics. Wire adapters are included to connect the lights to your factory bulb sockets, with no additional wiring needed. The TIR optic in the SS3 LED lights serve as both the optic and main lens for greater efficiency and light output. Thanks to this innovative feature, the total intensity of the SS3 is much greater than other LED pods. These lights are available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. SS3 Max LED light kits come in multiple light patterns and power levels. The Driving pattern is designed to supplement your high beams, but it's great for general illumination as well. Rather than a traditional "spot" pattern, the Driving pattern shines in an 18 x 8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds. The Fog pattern provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory fog lamps and will fully illuminate the area in front of your vehicle. When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a fog lamp for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. The SS3 Max LED light kits are available with a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a unique and more modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function. These fog light kits are offered at three different power levels: Sport, Pro, and Max. All options use high-intensity LED emitters and TIR optics for unmatched focus and overall output. The Sport model uses high-intensity LEDs and is the best bang for the buck you'll find. The Pro model steps things up in a big way, with double the total power. Finally, the Max model is designed with cutting-edge automotive emitters, for both high power and extreme intensity. Order the lights recommended for your vehicle.

Not Yet Reviewed

$699.95

Diode Dynamics Stage Series HitchMount SSC1 Sport Light Kits

Diode Dynamics Stage Series LED Hitch Mount SSC1 Sport reverse light kits are a great safety product for any vehicle that has a 2 in. receiver hitch along with a factory 7-round trailer plug. Their simple plug-and-play connections make it ideal for the person that would be worried about messing up an install. You can literally install these lights in a minute and be ready to go. By pairing Diode's patented TIR optics with high-powered LEDs, the SSC1 included in these kits provides an additional reverse light that's several times brighter than stock bulbs alone. If you're looking for an easy way to light up your path when backing up, or want to warn drivers pulling up to you, what better way than a Diode Dynamics LED hitch mount reverse light kit! Details: * Includes: One (1) SSC1 Sport Hitch Mount LED pod * Includes: One (1) 7-pin trailer single-output harness with two zip-ties * Fits in the 2 in. trailer hitch receiver * Adds a powerful reverse light, 4th brake light, and additional running light * Simple plug-and-play install * Optional SafetyStrobe brake light strobing

3.0 out of 5 stars ( 1 )

$139.95

Diode Dynamics Multicolor Demon Eye Kits

Diode Dynamics multicolor Demon Eye kits add full multicolor functionality, plus pure white for everyday use to your factory projector housings. They include an input wire for connecting to your factory signals, lighting up for lock/unlock and daytime running lights (DRL). These kits can be installed without having to open/bake open your headlamps! While the headlights still need removed, actual installation time for the Demon Eye brackets is typically less than 10 minutes per side. Enhance the accents on your Mustang with the multicolor functionality of a Diode Dynamics Demon Eye kit. Features and items: * Computer-designed for easy installation with specific brackets for the 2015-17 Ford Mustang headlights * Full RGBW multicolor with independent white LEDs—unlike other RGB demon eyes that produce a mixed white color * Converts the projector inside your Mustang's headlights to illuminate in any color for a unique, custom look. * Adds an LED to shine light onto the projector lens * App control—choose any color under the sun, with the Bluetooth RGBW controller * Patterns include strobe, fade, and more * Preset colors, camera-match, and music sync make them fun to show off * Demon Eye brackets (left and right side) * 2 Pro Series Demon Eyes with drivers * Bluetooth RGBW controller * 2 Phillips head screws * T-taps and dual input module * Installation guide

4.5 out of 5 stars ( 2 )

$199.95

Diode Dynamics Stage Series HitchMount C1R Light Kits

Diode Dynamics Stage Series Hitch Mount C1R reverse light kits are a great safety product for any vehicle that has a 2 in. receiver hitch along with a factory 7-round trailer plug. Their simple plug-and-play connections make them ideal for the person who might be worried about messing up an install. You can literally install these lights in a minute and be ready to go. By pairing their patented TIR optics with high-powered LEDs, the C1R included in this kit provides an additional reverse light that's several times brighter than stock bulbs alone. While the C1R has the same features as the SSC1 pod model, the big difference is the brake light feature with an optional safety brake strobe. Each one of the lights comes ready to pop into place with Diode's patent pending design. If you're looking for an easy way to light up your path when backing up, or want to warn drivers pulling up to you, what better way than the Diode Dynamics LED hitch mount reverse light kit. Details: * Includes: One (1) C1R Hitch Mount LED pod * Includes: One (1) 7-pin trailer single-output harness with two zip-ties * Fits in the 2 in. trailer hitch receiver * Adds a powerful reverse light, 4th brake light, and additional running light * Simple plug-and-play install * Optional SafetyStrobe brake light strobing

Not Yet Reviewed

$199.95

Diode Dynamics SS3 Pro LED Fog Light Kits

The Diode Dynamics SS3 Pro Fog Light kits are step up in power from the Sport kits. Each light features a custom molded mounting bracket, plug and play design for quick install, and specially engineered optics. Wire adapters are included to connect the lights to your factory bulb sockets with no additional wiring needed. The TIR optic in the SS3 LED lights serves as both the optic and main lens for greater efficiency and light output. Thanks to this innovative feature the total intensity of the SS3 is much greater than other LED pods. The lights are available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. SS3 Pro light kits come in multiple light patterns and power levels. The Driving pattern is designed to supplement your high beams, but it's great for general illumination as well. Rather than a traditional "spot" pattern, the Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds. The Fog pattern provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory fog lamps and will fully illuminate the area in front of your vehicle. When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. The SS3 Pro LED light kits are available with a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function. The SS3 LED fog light kits are available at three different power levels, Sport, Pro, and Max. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses high-intensity LEDs, and is the best bang for the buck you'll find. The Pro model steps things up in a big way, with double the total power. Finally, the Max model is designed with cutting-edge automotive emitters, for both high power and extreme intensity.

5.0 out of 5 stars ( 1 )

$499.95

Diode Dynamics Stage 1 Interior LED Conversion Light Kits

Diode Dynamics Stage 1 interior LED conversion light kits are a great choice if you're looking for a simple change of color, and slightly brighter output than your factory bulbs. Each kit includes all the LEDs you need to replace the factory incandescent bulbs in your vehicle. Each replacement bulb kit has been tested for your specific vehicle to ensure perfect fitment—so there's no guesswork involved, making installation easy. Simply swap out your factory bulbs with those in your Diode Dynamics Stage 1 interior LED conversion light kit! Stage 1 interior LED conversion light kit features: * Bulb kits available in choice of color: cool white, red, blue, or green * Kits vary depending on vehicle application to replace factory bulbs for map, glovebox, vanity mirror, trunk , dome, and license plate lights * LEDs are built with constant-current inductive circuitry, along with transient suppression * Increased output with LED appearance * LED lighting rated with accurate, measured lumen figures, not calculations or guesses (true-output tested in-house by Diode Dynamics) * Plug-and-play installation is quick and easy * LEDs are longer lasting, with no flickering or failure

5.0 out of 5 stars ( 1 )

$32.95

—

$55.95

Diode Dynamics Reverse Light Wiring Kits

Diode Dynamics reverse light wiring kits allow you to connect your Diode Dynamics lights with backlight functionality to your vehicle's wiring for simple, everyday operation. When paired with Diode's LED pods with a white main beam and red backlight, these harnesses allow your lights to operate as an additional red accent light, with your taillights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The included toggle switch allows you to override the vehicle signals and turn on the main beam anytime. Diode Dynamics reverse light wiring kits include T-taps, zip ties, and a universal harness with high-capacity wiring, Deutsch DT connectors, and a waterproof fuse.

Not Yet Reviewed

$59.95

Diode Dynamics Stage 2 Interior LED Conversion Light Kits

Diode Dynamics Stage 2 interior LED conversion light kits are a great choice if you're looking for the highest increase in light output over your factory bulbs, with a simple change of color. Each bulb kit includes all the LEDs you need to replace the factory incandescent bulbs in your vehicle. Each kit has been tested for your specific vehicle to ensure perfect fitment—so there's no guesswork involved, making installation easy. Simply swap out your factory bulbs with those in your Diode Dynamics Stage 2 interior LED conversion light kit! Stage 2 interior LED conversion light kit features: * Bulb kits available in choice of color: cool white, red, blue or green * Kits vary depending on vehicle application to replace factory bulbs for map, glovebox, vanity mirror, trunk, dome, and license plate lights * LEDs are built with constant-current inductive circuitry, along with transient suppression * Increased output with LED appearance * LED lighting rated with accurate, measured lumen figures, not calculations or guesses (true-output tested in-house by Diode Dynamics) * Plug-and-play installation is quick and easy * LEDs are longer lasting, with no flickering or failure

5.0 out of 5 stars ( 1 )

$47.95

—

$95.95

Diode Dynamics C1 HitchMount LED Pod Reverse Kits

Diode Dynamics C1 HitchMount LED pod reverse kits are plug-and-play, 2 in. trailer hitch-mounted lights that significantly increase rear visibility. They use a high-power Stage Series C1R (or SSC1) LED pod to provide intense white light for reversing, along with a red backlight for running lights and a 4th brake light function. Additional details: * Enhanced visibility: Features high-intensity LEDs with TIR (Total Internal Reflection) optics for a brighter, more focused beam than stock reverse lights * Easy 5-minute, no-drill installation that plugs directly into the factory 7-pin or 4-pin trailer connector * Built with powdercoated aluminum construction and rated for durability in harsh, all-weather conditions * In the box: -- One (1) SSC1 Sport or C1R HitchMount LED pod -- One (1) Snap-in 2.5 in. receiver adapter -- One (1) 4-Pin trailer single output harness -- Two (2) Zip ties -- One (1) T-Tap -- Installation guide

Not Yet Reviewed

$119.95

Diode Dynamics SSC2 Backlit Ditch Light Kits

The Diode Dynamics SSC2 backlit ditch light kits will allow you to easily mount two SSC2 backlit pods above the hood. Featuring higher output intensity than any other 2 in. light on the market, these LED pods have been designed for maximum functionality with custom-engineered TIR optics shining in highly useful beam patterns—all in a durable package. Product highlights: * Diode Dynamics Stage Series 2 in. SSC2 LED Pods (sold as a pair) * Durable powdercoated aluminum casting construction, polycarbonate lens, and rubber gasket * Kit features a low-profile design and will not interfere with raising or lowering the hood * Modern TIR optics for the highest intensity on the market—offered in Combo, Flood, SAE Driving, SAE Fog, and Spot beam options * The custom engineered TIR optic in the Stage Series 2 in. pods collects all of the light from the LED and directs it only where you need it, drastically reducing glare and improving total efficiency * With functional patterns—all Stage Series beam pattern options were designed with optical simulation modeling to shape the output in a highly-functional beam pattern—no matter what your auxiliary lighting needs are * Polarity specific * Backlighting feature in your choice of amber, red, blue, and cool white (6000K)—backlight fully illuminates the TIR optic providing a more unique and modern look than the small indicator LEDs found in other products * Application-specific brackets are CAD-designed to install using factory mounting points, no cutting or drilling required * Brackets are full stainless steel and won't corrode over time, and with thick-gauge construction, reduces vibration or bouncing while driving * Integrated Deutsch-style connector provides simple connections * Pin-fin heatsink design * Durability tested: SAE J575

Not Yet Reviewed

$339.95

—

$439.95

Diode Dynamics SS5 Windshield CrossLink Lightbar Kits

Diode Dynamics SS5 windshield CrossLink lightbar kits will allow you to mount multiple linked SS5 LED pods above the factory windshield. Featuring the highest output intensity of any 5 in. LED pod on the market, the auxiliary lamps are designed for maximum functionality, with patented technology and custom-engineered TIR optics—all in a durable package! The application-specific brackets were CAD-designed to bolt into place using factory mounting points above the factory windshield, no cutting or drilling required. These kits are available at two power levels, all options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model pods use nine high-intensity LEDs for 40W of total power, while the Pro model steps things up in a big way, with double the total power at 90W. Select the kit for your application needs. Product details and features: * Heavy-duty construction—Stage Series LED lighting has been extensively tested for long-term operation * Ultra-high intensity, with custom engineered TIR optics—the SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods * Selectable backlight color, with multiple color options * Patent-pending CrossLink technology allows you to link the multiple SS5s included in this kit together to create a single lightbar that provides extreme rigidity, but is fully adjustable for both straight and curved configurations * Control through factory aux switch bank using the included harness—kits include an OEM aux switch adapter wire that connects to the harness and allows you to control your lights using the factory-installed aux switch bank * Two switches used—one for the main beam, and one for the backlight; for those who don't have the aux switch bank, use the toggle switch adapter wire included with the harness to mount a switch * Functional Output: Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly functional beam patterns with high efficiency * Combo pattern combines both the Driving and Flood optics, perfect for all-around use—it shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern * Bolt-on fitment for easy installation * For states that require them, Diode Dynamics also offers snap-on covers (not included) for the SS5 pods and are available in a variety of colors and keep your SS5 pods clean and protected from dirt, dust, or whatever else the road throws your way!

Not Yet Reviewed

$1,909.95

Diode Dynamics C1R HitchMount LED Pod Reverse Kits

Diode Dynamics C1R HitchMount LED pod reverse kits are a plug-and-play lighting upgrade that mounts a high-power LED light (C1R) into a 2 in. or 2.5 in. trailer hitch receiver, significantly improving rear visibility. They function as a powerful, automatic white reverse light, a red running light, and an integrated 4th brake light with optional strobe functionality, all connecting via the trailer harness. Additional details: * Provides 3-in-1 functionality: high-power white reverse light, red running light, and 4th brake light * The C1R model includes a SafetyStrobe feature that flashes 3 times when brakes are applied * Easy 5-minute, tool-free "snap-fit" installation, requiring no custom wiring or drilling * Uses high-intensity LED lights with patented TIR optics, designed for water, dust, and vibration resistance * The kits are designed for trucks, SUVs, and other vehicles that need better rear illumination * In the box: -- One (1) SSC1 Sport or C1R HitchMount LED pod -- (1) Snap-in 2.5 in. receiver adapter -- (1) 4-Pin trailer single output harness -- (2) Zip-ties -- (1) T-Tap -- Installation guide

Not Yet Reviewed

$179.95

Diode Dynamics SSC2 Sport Reverse Light Kits

Diode Dynamics Stage Series reverse light kits allow you to easily mount SSC2 LED pods underneath the rear bumper of your vehicle, adding high-power reverse lights, additional running lights, and an operational 4th brake light with the C2R option. Diode Dynamics SSC2 Sport reverse light kits provide function and ease of use with an integrated red running light and a plug-and-play wiring harness for trouble-free installation. The featured TIR optic technology is paired with a high-intensity LED chip, providing additional reverse light that is several times brighter than stock bulbs alone. The distinctive vibrant red backlight functions as an additional accent light while driving for a unique modern look. SSC2 Sport light pods distribute a highly functional flood beam pattern with uniform, even illumination via pillow optics on the outer lens surface for a true optically designed spread of light. Delivering maximum performance in a small compact package, each pod features cast aluminum housing, rubber gasket, and polycarbonate lens construction that is IP69K waterproof and high pressure rated. Provided in kits: * Two SSC2 Sport LED pods * One universal reverse light wiring harness * Two mounting brackets * Six zip ties * Mounting hardware

Not Yet Reviewed

$299.95

Diode Dynamics SSC2 Max Reverse Light Kits

Diode Dynamics Stage Series reverse light kits allow you to easily mount SSC2 LED pods underneath the rear bumper of your vehicle, adding high-power reverse lights, additional running lights, and an operational 4th brake light with the C2R option. Diode Dynamics' SSC2 Max reverse light kits increase power utilizing the same Osram HX Boost LEDs found in their highest-output SS3 LED pods, delivering 3,900 raw lumens. That's serious brightness from an LED pod that still fits in the palm of your hand. Max lights provide function and ease of use with an integrated red running light and a plug-and-play wiring harness for trouble-free installation. The featured TIR optic technology is paired with a high-intensity LED chip, providing additional reverse light that is several times brighter than stock bulbs alone. The distinctive vibrant red backlight functions as an additional accent light while driving for a unique modern look. SSC2 Max light pods distribute a highly functional flood beam pattern with uniform, even illumination via pillow optics on the outer lens surface for a true optically designed spread of light. Each pod features cast aluminum housing, rubber gasket, and polycarbonate lens construction that is IP69K waterproof and high pressure rated. Provided in kits: * Two SSC2 Max LED pods * One reverse light wiring harness * Two mounting brackets * Six zip ties * Mounting hardware

Not Yet Reviewed

$559.95

Diode Dynamics Motorsports Stage Series Light Bar Kits

Diode Dynamics Motorsports Stage Series light bar kits allow you to mount up to four 12 in. or 18 in. LED light bars on the hood of your vehicle. The whole kit includes everything needed for installation and uses stainless steel hardware for long-lasting durability—including custom-made stainless rubber bumpers, which absorb vibration and prevent any damage to the hood. These purpose-built brackets were CAD-designed to provide the performance you need to go faster and see further. With the modular design, you can adjust the setup and angling for your specific race conditions and preference. Each light bar is adjustable in output angle and position, and you can also adjust the brackets themselves to align with the contour of your hood. The Stage Series lineup also lets you swap out optics and amber or white colors. These kits are built for competition racing—specifically, night stage rally races. The LED auxiliary light bars have been engineered for maximum functionality, with compact size, custom-engineered TIR (total internal reflection) optics, and a wide flood pattern. Here's what comes with a complete light bar kit: * Full bracket set * Four SS12 12 in. or SS18 18 in. Stage Series light bars * One heavy-duty single-output relay harness * Two DT splitters * Four SS wide clear lenses * Eight 8 in.-32 stainless steel hex nuts * Four 8 in.-32 stainless steel hex screws * Eight quarter-turn 1500 Series spacers * Eight M6 custom-designed bumper feet * (24) M6 stainless steel flange bolts * (24) M6 stainless steel flange nuts * Installation guide

Not Yet Reviewed

$1,499.95

Diode Dynamics SSC2R Reverse Light Kits

Diode Dynamics Stage Series reverse light kits allow you to easily mount SSC2 LED pods underneath the rear bumper of your vehicle, adding high-power reverse lights, additional running lights, and an operational 4th brake light with the C2R option. Diode Dynamics SSC2R reverse light kits provide function and ease of use with features, like an integrated red running light, TIR optic technology, and a plug-and-play wiring harness for trouble-free installation, plus a powerful 4th brake light that activates anytime you apply your brakes. The SSC2Rs also feature optional brake light strobing, which can be activated in 15-second intervals and easily disabled if desired. The TIR optic technology paired with high-intensity LED chips provide additional reverse light that is several times brighter than stock bulbs alone, and the distinctive vibrant red backlight adds a unique modern look while driving. The highly functional flood beam pattern distributes uniform, even illumination via pillow optics on the outer lens surface for a true optically designed spread of light. Each pod features cast aluminum housing, rubber gasket, and polycarbonate lens construction that is IP69K waterproof and high pressure rated. Provided in kits: * Two SSC2R LED pods * One wiring harness * Two mounting brackets * Six zip ties * Mounting hardware

Not Yet Reviewed

$459.95

Diode Dynamics SSC1 Sport Reverse Light Kits

Diode Dynamics Stage Series reverse light kits allow you to easily mount SSC1 LED pods underneath the rear bumper of your vehicle, adding high-power reverse lights, additional running lights, and an operational 4th brake light with the C1R option. Diode Dynamics SSC1 Sport reverse light kits offer function and ease of use with an integrated red running light and a plug-and-play wiring harness for trouble-free installation. Featuring TIR optic technology paired with a high-intensity LED chip, these SSCI pods provide additional reverse light that is several times brighter than stock bulbs alone with reduced glare. The distinctive vibrant red backlight functions as an additional accent light while driving for a unique modern look. SSC1 Sport light pods feature a highly functional flood beam pattern distributing uniform, even illumination using pillow optics on the outer lens surface for a true optically designed spread of light. Delivering maximum performance in a small compact package, each pod features cast aluminum housing, rubber gasket, and polycarbonate lens construction that is IP69K waterproof and high pressure rated. Provided in kits: * Two SSC1 Sport LED pods * One universal reverse light wiring harness * Two mounting brackets * Two Deutsch DT pigtails * Six zip ties * Mounting hardware

Not Yet Reviewed

$259.95

Diode Dynamics SS3 Backlit Ditch Light Kits

Diode Dynamics SS3 backlit ditch light kits will allow you to easily mount two SS3 or SSC2 backlit pods above the hood. The application-specific brackets were CAD-designed to install using factory mounting points, no cutting or drilling required. The mounting brackets in these kits are constructed out of thick-gauge stainless steel and won't corrode over time, unlike other options made out of mild steel, so you won't experience any vibration or bouncing while driving. These backlit ditch light kits have a low-profile design while minimizing glare, and they will not interfere with raising or lowering the hood. The custom engineered TIR optics collect all of the light from the LED, and directs it only where needed, drastically reducing glare, and improving total efficiency. The Stage Series LED pods are available at different power levels—Sport or Pro—both options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output, however, the Pro option is double the amount of total power! Select the backlit ditch light kit suited for your application needs. Product features and details: * Allows you to mount two Stage Series LED pods above the hood utilizing existing mounting points and hardware for a simple installation * Brackets feature a thick-gauge stainless steel construction that won't corrode overtime, unlike mild steel options * Stage Series LED pods are available in a cool white or selective yellow color—Diode Dynamics also offers replacement lenses (sold separately) that allow you to change the color or optic of your SS3 or SSC2 Pods * All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly functional beam pattern * Integrated backlight gives you an additional accent light, along with the main beam—the backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products * To power the backlight, use the included harness to tap your desired vehicle function * Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing * Snap-on pod light covers are available (sold separately) in a variety of colors to keep your Stage Series Pod clean and protected from dirt, dust, or whatever else the road throws your way!

Not Yet Reviewed

$299.95

—

$419.95

Diode Dynamics SSC2 Pro Reverse Light Kits

Diode Dynamics Stage Series reverse light kits allow you to easily mount SSC2 LED pods underneath the rear bumper of your vehicle, adding high-power reverse lights, additional running lights, and an operational 4th brake light with the C2R option. Diode Dynamics SSC2 Pro reverse light kits offer a noticeable boost in total power over the Sport models, providing function and ease of use with an integrated red running light and a plug-and-play wiring harness for trouble-free installation. The featured TIR optic technology is paired with a high-intensity LED chip, providing additional reverse light that is several times brighter than stock bulbs alone. The distinctive vibrant red backlight functions as an additional accent light while driving for a unique modern look. SSC2 Pro light pods distribute a highly functional flood beam pattern with uniform, even illumination via pillow optics on the outer lens surface for a true optically designed spread of light. Delivering maximum performance in a small compact package, each pod features cast aluminum housing, rubber gasket, and polycarbonate lens construction that is IP69K waterproof and high pressure rated. Provided in kits: * Two SSC2 Pro LED pods * One universal reverse light wiring harness * Two mounting brackets * Six zip ties * Mounting hardware

Not Yet Reviewed

$419.95

40 Results Found For "Kits"