Availability
Showing In Stock Items. Show All 9 Items.
Lokar Restomod throttle pedal assemblies are machined from billet aluminum, and designed to complement the entire line of Lokar products. The Restomod Series is offered in different styles and finishes covering GM and early GM vehicles.
( 5 )
$187.95
—
$244.95
MustangSteve's cable clutch conversion kits will make your classic feel like a modern car with a smoothly operating clutch. The conversion kits will allow you to modify your clutch pedal to a later model type quadrant setup for use in installation of a cable operated clutch, especially useful when installing a late model T-5 or Tremec manual transmission. Yes, it takes a bit more effort to install this conversion, but you already know that the easiest stuff is seldom the best. This setup requires you to remove the clutch pedal and pedal support for installation of the quadrant. You will need to take the pedal out to replace bushings and get rid of those big springs anyway when converting to cable operation. But you will be rewarded by enjoying years of trouble-free service, as well as simple cable replacement access should you ever need to replace the cable. Unlike any other aftermarket cable clutch conversion, this fully welded quadrant kit offers several advantages: * Welding the quadrant to the stock clutch pedal will never allow it to come loose from constant use * No under designed clevis or other small parts to wear out or break (cable attachment points) * Pulls the cable with a constant radius, unlike the single lever type—keeps cable pulling straight from cable housing * Transfers forces to the cable directly in line with the clutch pedal—no twisting motion to bend the arm * A whole lot cheaper to install, the do-it-yourselfer can build it for the price of a quadrant, plus the cost of a new cable * Fits with the MustangSteve power brake conversion * Fits with MustangSteve ball bearing clutch pedal shaft conversion * Virtually eliminates clutch chatter caused by loose clutch actuation linkage Info for using this conversion kit with a Toploader or T10 Transmission: The quadrant kits are designed to be used with a T-5 or Tremec conversion and a cable clutch. If you want to use the cable clutch with an original Mustang standard transmission, you will have to do a little fabrication. In order to make the cable clutch work with the original type bellhousing, you must install a cable type release arm and a new pivot bolt (fulcrum) in the bellhousing. You'll need a Mr. Gasket replacement fulcrum bolt and a Ford release arm from a 1987-1993 5.0 Mustang originally equipped with a T5. The aluminum plate will need to be welded into the bellhousing and then you will need to thread a 1/2 in. hole in the plate for the new fulcrum bolt. You will also need to fabricate a cable housing stop to go outside the bellhousing.
Not Yet Reviewed
$263.99
—
$267.99
Lokar Restomod Series pedal pads add style and function to your classic car. Complementing the entire line of Lokar products, they are available in several different styles machined from billet aluminum. The pads provide a clean, classic look in either a brushed or black finish with rubber inserts.
Not Yet Reviewed
$43.95
—
$87.95
Ram pedal height adjuster kits allow adjustment of pedal height downward. They include mounting bracket, feed line kit, and adapters. Ram pedal height adjusters will not increase bearing travel.
Not Yet Reviewed
$219.00
Finely crafted, injection-molded pedal pads by RESTOPARTS® Manufactured are just like the factory originals, right down to the last rubber line. Available for your gas, brake, clutch, or emergency brake pedals, these are the most correctly reproduced brake pedal pads—a show-car must! With all-authentic, all-original parts, RESTOPARTS® helps make your restoration vehicle project perfect. Order the replacement pedal pads designed for your applications.
( 43 )
$12.99
—
$26.99
Hays hydraulic pedal height adjuster kits plumb inline between your factory or aftermarket master cylinder and release bearing. By adjusting the screw on the top of the cylinder, fluid is initially diverted to the adjuster cylinder—and once the cylinder fills, the remaining fluid travels directly to the hydraulic bearing to actuate the clutch. This adjustment adds freeplay to the pedal and moves the engagement point down toward the floor. Hays pedal adjusters are compatible with most factory or aftermarket release bearing/master cylinder combinations with the proper adapters. Additional features: * Allows you to set clutch release point where you like in the pedal stroke * Easily plumbs inline between clutch master cylinder and release bearing * Black anodized finish for great looks * Includes a -3 AN tee fitting, 12 in. -3 AN braided line, and additional adapters (depending on application)
( 1 )
$333.95
On Sale
Add gleaming custom accents to your accelerator, brake, clutch, dimmer switch, and parking brake pedals. These Deluxe pads from Mr. Gasket are a coordinated line of deep tread, long wearing pedal pads with contrasting chrome grids. They are available in a choice of standard or "barefoot" pedal pad styles.
( 5 )
$30.71
$19.96
FFP Customs bolt-in adjustable pedal assemblies are designed to allow drivers to position themselves in the car for optimal safety and comfort. This design also allows the driver to be placed where it benefits the weight balance; moving weight in the car can be a great tuning tool. These assemblies allow a driver of any height and stature to move the throttle, brake, and clutch (where applicable) pedals individually to suit their needs. All pieces of the kits are made of 6061 aluminum, providing for optimum strength while maintaining lightweight parts. The sleek design of the master cylinder and brake lines being mounted under the dash helps clean up the engine bay and leave more room for accessibility to the engine and other engine combinations. Each FFP kit uses factory mounting points, allowing for an easy bolt-and-go install; no fabrication work or welding is required. Kits are available with brake/throttle pedals, or brake/throttle/clutch pedals. The assemblies will fit a variety of Mustang applications from the 1970s, '80s, and '90s. BRAKE details: * Moving the pedal pad on the brake pedal will allow you to change the pedal ratio -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the brake pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * 1 5/8 in. billet reservoir tube mount * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote tandem master cylinder kit. * Pedal attaches to the master cylinder using a 3/8 in. Heim joint and 3/8 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 THROTTLE details: * The pivot utilizes bronze oil-impregnated bushings * There are three pivot locations * Units are designed to be used with Lokar throttle cable * The throttle stop is preset wherever you move the pedal; the stop travels with it. * The throttle firewall mount sets the cable in line with the pedal * Wide Open Throttle switch available upon request CLUTCH details (available on assembly models that include a clutch pedal): * Moving the pedal pad on the clutch pedal will allow you to change the pedal ratio.\ -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the clutch pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * Kits include reservoir-mount spacers to accommodate the added clutch master cylinder reservoir * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote single master cylinder kit * Pedal attaches to the master cylinder using a 5/16 in. Heim joint and 5/16 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 * By having the master cylinder mounted directly to the pedal, this allows for a quick return of the pedal upon release * Kit comes with a neutral safety switch and mount * On the neutral safety switch mount, a throttle cut-off switch can be added upon request.
Not Yet Reviewed
$1,800.00
—
$2,250.00
MX styling with rugged, durable construction and solid traction make Kuryakyn Riot brake pedal pads a must-have addition to complement the entire line of Riot foot and hand controls. Order the model recommended for your bike application. Additional details: * Direct replacement for FL, FX, and XG models * Tough single aluminum casting with resilient bead-blasted silver or satin black finish * Raised-tooth top surface delivers ideal traction in any riding condition
Not Yet Reviewed
$45.99
—
$57.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
