Availability
Showing In Stock Items. Show All 32 Items.
FFP Customs bolt-in adjustable pedal assemblies are designed to allow drivers to position themselves in the car for optimal safety and comfort. This design also allows the driver to be placed where it benefits the weight balance; moving weight in the car can be a great tuning tool. These assemblies allow a driver of any height and stature to move the throttle, brake, and clutch (where applicable) pedals individually to suit their needs. All pieces of the kits are made of 6061 aluminum, providing for optimum strength while maintaining lightweight parts. The sleek design of the master cylinder and brake lines being mounted under the dash helps clean up the engine bay and leave more room for accessibility to the engine and other engine combinations. Each FFP kit uses factory mounting points, allowing for an easy bolt-and-go install; no fabrication work or welding is required. Kits are available with brake/throttle pedals, or brake/throttle/clutch pedals. The assemblies will fit a variety of Mustang applications from the 1970s, '80s, and '90s. BRAKE details: * Moving the pedal pad on the brake pedal will allow you to change the pedal ratio -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the brake pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * 1 5/8 in. billet reservoir tube mount * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote tandem master cylinder kit. * Pedal attaches to the master cylinder using a 3/8 in. Heim joint and 3/8 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 THROTTLE details: * The pivot utilizes bronze oil-impregnated bushings * There are three pivot locations * Units are designed to be used with Lokar throttle cable * The throttle stop is preset wherever you move the pedal; the stop travels with it. * The throttle firewall mount sets the cable in line with the pedal * Wide Open Throttle switch available upon request CLUTCH details (available on assembly models that include a clutch pedal): * Moving the pedal pad on the clutch pedal will allow you to change the pedal ratio.\ -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the clutch pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * Kits include reservoir-mount spacers to accommodate the added clutch master cylinder reservoir * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote single master cylinder kit * Pedal attaches to the master cylinder using a 5/16 in. Heim joint and 5/16 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 * By having the master cylinder mounted directly to the pedal, this allows for a quick return of the pedal upon release * Kit comes with a neutral safety switch and mount * On the neutral safety switch mount, a throttle cut-off switch can be added upon request.
Not Yet Reviewed
$1,800.00
—
$2,250.00
On Sale
Add gleaming custom accents to your accelerator, brake, clutch, dimmer switch, and parking brake pedals. These Deluxe pads from Mr. Gasket are a coordinated line of deep tread, long wearing pedal pads with contrasting chrome grids. They are available in a choice of standard or "barefoot" pedal pad styles.
( 5 )
$30.71
$19.96
Wilwood Disc Brakes offers a selection of forward and reverse mount brake and clutch pedal assemblies engineered to provide superior brake system performance and custom appeal. Designed for use with Wilwood's aluminum tandem or composite master cylinders, Wilwood brake/clutch pedal assemblies are made from lightweight aluminum and are designed for easy mounting and smooth, reliable operation. Select versions include Wilwood's Tru-Bar pedals that utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide the ultimate in precision, control, and adjustment of brake bias on race-prepped vehicles. All Wilwood pedal assemblies feature comfortable ergonomics with non-slip footpads and a protective coating. They're available in a variety of sizes and styles.
( 50 )
$114.78
—
$508.18
Wilwood offers a selection of forward and reverse mount brake and clutch pedal assemblies engineered to provide superior brake system performance and custom appeal including swing mount pedal assemblies. These pedal assemblies are made from lightweight aluminum with high-strength reinforced I-beam-style forged pedal arms and non-skid waffled pedal pads. They're equipped with a balance bar and a pin/clevis pushrod attachment for precise adjustments and smooth, bind-free operation through the entire range of travel. These assemblies are designed to accept any Wilwood vertical-mount flange, single outlet master cylinder (not included—ordered separately by style and bore size). Select the swing mount pedal assembly for your application needs.
( 1 )
$149.36
—
$344.80
Wilwood offers a selection of forward and reverse mount brake and clutch pedal assemblies engineered to provide superior brake system performance and custom appeal including swing mount tandem pedal assemblies. These pedal assemblies are made from lightweight aluminum with high-strength reinforced I-beam-style forged pedal arms and non-skid waffled pedal pads. They're equipped with a balance bar and a pin/clevis pushrod attachment for precise adjustments and smooth, bind-free operation through the entire range of travel. These assemblies accept a 2.25 in. vertical mount flange single outlet master cylinder for the clutch, and Wilwood 3.25 in. horizontal flange tandem master cylinder for the brakes, available separately in a variety of styles and bore sizes.
Not Yet Reviewed
$298.80
Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.
( 8 )
$594.95
Lokar drive-by-wire electronic throttle control pedal assemblies are designed to work with Lokar's drive-by-wire electronic throttle controls. The addition of one of these custom pedals completes the Lokar assembly of the first custom, programmable electronic throttle pedals for the automotive aftermarket. The pedal assemblies use a splined arm for versatile mounting with all-metal, aluminum, and stainless steel construction. These Lokar pedal assemblies are available in a variety of styles and finishes to match your custom application.
( 3 )
$134.95
—
$194.95
Wilwood offers a selection of forward and reverse mount brake and clutch pedal assemblies engineered to provide superior brake system performance and custom appeal including swing mount Tru-Bar pedal assemblies. They are made from lightweight aluminum with high-strength reinforced I-beam-style forged pedal arms and non-skid waffled pedal pads. These pedal assemblies are equipped with a Tru-Bar balance bar that incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. These Tru-Bar pedals also utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. Select the pedal assembly designed for your application needs.
Not Yet Reviewed
$251.61
—
$606.95
Gas pedals may get most of the fun, but the clutch, brake and parking brake pedals deserve to look just as good. Clayton Machine anodized billet aluminum pedal pads perfectly complement their throttle assemblies, reflecting your attention to detail with tough, no-nonsense parts. These pedal covers have aluminum outers with rubber inserts and do not require drilling to install. They're available in either black or gray. Customize your ride for better looks and performance with Clayton Machine anodized billet aluminum pedal pads.
( 1 )
$75.95
—
$145.95
Summit Racing™ offers unique pedal pads to help customize your ride. From your throttle assembly to the dimmer switch, Summit™ has a statement style just for you, including the classic "barefoot" pads in polished aluminum. Why settle for ordinary? Dress your pedals to impress with these economical pad upgrades!
( 3 )
$25.99
Classic Performance has a selection of brake pedal pads available in different styles to be used as replacements or in your custom setup. Each one is crafted from premium quality metals, fitted with rubber inserts for an enhanced grip, and designed for easy alignment and adaptability. Select your preferred style.
( 1 )
$38.99
Brake pedal rod extensions connect the brake pedal to the master cylinder or booster, extending the length of the rod to achieve proper alignment or accommodate modifications. OER Authorized brake pedal rod extensions meet or exceed stringent OER quality standards. Perfect for street rods, customs, or muscle cars, these rod extensions are available in different lengths and hole sizes to ease your custom firewall setup, brake upgrade, or power brake conversion. Select the rod best suited to your needs.
( 2 )
$5.99
Wilwood offers a selection of forward and reverse mount brake and clutch pedal assemblies engineered to provide superior brake system performance and custom appeal including Tru-Bar pedal assemblies. The pedal assemblies are made from lightweight aluminum with high-strength reinforced I-beam-style forged pedal arms and non-skid waffled pedal pads. They're equipped with a Tru-Bar balance bar that incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. These Tru-Bar pedals also utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. Select the Tru-Bar pedal assembly model designed for your application needs.
Not Yet Reviewed
$707.78
—
$918.56
LEED Brakes has the components you need to keep your hot rod's brake system functioning properly. LEED Brakes pedal assembly components can help you fix or customize your pedal to get it feeling just right.
( 1 )
$3.99
—
$62.99
Drake billet pedal covers are stylish, high-quality pedal covers designed to add a custom look to your ride. They are machined from 6061-T6 billet aluminum. Give your ride a little added style with these Drake billet pedal covers.
( 1 )
$47.43
—
$72.55
Customize your interior with NRG Innovations' Sport pedal pad cover plates for the gas, brake, and/or clutch pedals. The covers are made from lightweight aluminum, constructed with aluminum mesh for better foot grip. Some models feature real carbon fiber trim or rubber inserts for added looks and style. The new clamping attachment system provides easy, efficient installation and durability. NRG pedal covers are available in several colors for manual and automatic vehicles.
Not Yet Reviewed
$28.00
—
$38.50
For decades, Fairchild Industries has provided top-quality products in extruded rubber, molded rubber, molded plastic, extruded plastic, and elastomer for customers worldwide. Their accelerator rod dust boots are designed by in-house automotive engineers, specializing in reverse-engineering products to ensure a specific, high-quality fit, while striving to improve upon the current original equipment manufacturer parts. Available for a selection of vehicles, they are perfect replacements for missing, torn, or damaged OE accelerator rod dust boots.
Not Yet Reviewed
$9.99
URO Parts manufactures their pedal assembly components to OEM dimensions and shapes for easy installation. The quality materials they use will resist both running heat and corrosion from harsh environmental elements. Most of these replacement parts come from the same facilities as many well-known and much costlier European brands. That translates into quality, reliability, and savings for URO customers ordering the pedal assembly components designed for their application!
Not Yet Reviewed
$4.99
—
$29.99
All American Billet dimmer switch covers provide that final piece to a customized interior. They're machined from 6061 T-6 aluminum for strength and longevity, come with a set screw for an easy installation, and are available in different finishes.
Not Yet Reviewed
$12.95
—
$17.95
On Sale
Drake Shelby aluminum pedal covers are available for manual or automatic cars and fit both with beautiful billet construction and race-inspired style. These lightweight pedal covers feature precision machined details and satin textured accents for a custom race car appearance. They install onto the factory pedals with stainless steel hardware for a secure fit.
Not Yet Reviewed
$99.45
$54.70
—
$118.95
Lokar Goolsby Edge edition pedal pads bring a new rugged muscle car feel to your ride. Made from high-quality billet aluminum, the pedal pads have removable inserts for customization. The pads are also available with a grip tape insert. The 1/2 in.-20 mounting stud is compatible with most aftermarket brake and clutch arms. Add the finishing touch to your vehicle with Goolsby Edge edition pedal pads.
Not Yet Reviewed
$147.95
—
$238.95
Have you been experiencing too much side to side movement and pedal binding at the pivot? OER brake and clutch pedal pivot bushings are designed to protect from abrasion. The split nylon flange bushings are manufactured to original specifications down to the smallest detail. OER brake and clutch pedal parts are application-specific and made to fit without modifications.
( 17 )
$7.99
Clearance
Dorman pedal pads are designed to replace your factory originals that have seen better days. Tough and practical, they stand up to all the elements--including harsh winter salt. Their true value, however, lies in safety: made of hardened rubber to stop shoes from slipping, they can be counted on to withstand continual wear and tear. Dorman pedal pads are available to fit the brake, clutch, accelerator, and parking brake positions. They install easily--just slip the pad onto the pedal. Where applicable, they are often sold in sets of two.
( 93 )
$4.99
—
$6.99
The Stop Shop pedal pivot shaft clips fit many classic models. These retaining clips hold the brake or clutch and brake pedal to the shaft. They also fit most 1963 to 1972 models, compatible with Chevelle, Camaro, Nova, Firebird, Corvette and more. These must-have parts fit all automatic/manual transmission models and are manufactured to the highest quality standards.
( 1 )
$7.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
