Availability
Showing In Stock Items. Show All 48 Items.
Lokar's Midnight series billet aluminum gas pedals are ball-milled and spring-loaded like the OEM design. Their removable lower arm is splined for versatility in mounting them to the right or left of the mounting bracket. The upper arm is a one-piece design, and the shaft and arm are one piece, requiring no pins.
( 115 )
$244.95
Lokar billet aluminum gas pedal assemblies are ball-milled and spring-loaded like the OEM design. Their removable lower arm is splined for versatility in installing them to the right or left of the mounting bracket. The upper arm is a one-piece design, and the shaft and arm are one piece, requiring no pins. These pedal assemblies are available with many options. Order the kit recommended for your application.
( 105 )
$244.95
Lokar billet brake pedal arm assemblies are available for the replacement of the Kugel brake assembly, as well as some popular car and truck applications. These quality replacements include a billet arm and an oval or rectangular pedal pad with rubber inserts. Some models also include a clutch arm and pedal pad. Order the universal-fit or vehicle-specific assembly recommended for your classic.
( 9 )
$283.95
—
$567.95
Billet Specialties universal billet aluminum pedal kits add a finishing touch to the driver compartment. These universal kits are available in your choice of diamond cut or flame designs, and require minor drilling for installation. They are machined from 6061-T6 billet aluminum, polished to a mirror finish, and include hardware with instructions.
( 19 )
$181.95
—
$186.54
On Sale
Properly mount your Holley DBW accelerator pedal in the OE location with Holley brackets. CNC cut and formed from steel for consistent precision, the brackets have a black powdercoated finish to provide a neat, clean appearance, added durability, and years of worry-free use. Holley drive-by-wire accelerator pedal brackets are available in several styles to fit specific applications. Choose the one designed for your car or truck. Features: * Installs in stock location using factory hardware for easy installation * Designed for use with Holley #145-160 or OE C6 Corvette accelerator pedal
( 7 )
$106.95
$58.95
—
$95.89
Lokar Restomod throttle pedal assemblies are machined from billet aluminum, and designed to complement the entire line of Lokar products. The Restomod Series is offered in different styles and finishes covering GM and early GM vehicles.
( 3 )
$244.95
Have you been experiencing too much side to side movement and pedal binding at the pivot? OER brake and clutch pedal pivot bushings are designed to protect from abrasion. The split nylon flange bushings are manufactured to original specifications down to the smallest detail. OER brake and clutch pedal parts are application-specific and made to fit without modifications.
( 16 )
$7.99
Are your pedal pads worn or cracked? Not only do they look bad, but damaged pedal pads can also be a safety hazard while driving. Replace them with these reproduction pedal pads from OER! These top-quality pedal pads are identical replicas of the factory originals, down to the ribbing on the pads. Gas, brake, clutch, and E-brake pads are available for a variety of applications and correctly install in place of the stock pads. OER pedal pads will improve the appearance of your interior, and their rubber tread will help keep your feet in good contact with the pedals for safe braking and acceleration.
( 100 )
$9.99
—
$28.99
ACDelco GM Genuine Parts accelerator pedals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Service your vehicle with OE parts specifically designed for your Chevrolet, Buick, GMC, or Cadillac--ACDelco GM Genuine Parts.
( 2 )
$100.99
Level 7 Motorsports 1967-72 C10 drive-by-wire throttle pedal brackets include stainless steel mounting hardware and bolt into the existing C10 throttle pedal location to properly locate a 2005-13 Corvette pedal in the correct position. Take your vintage ride to the next level with Level 7 Motorsports 1967-72 C10 drive-by-wire throttle pedal brackets. Other product features and items include: * Powdercoated heavy-duty steel bracket * Stainless steel ARP fasteners * Optional GM Corvette throttle pedal available separately
Not Yet Reviewed
$104.99
Lokar Midnight Series black anodized, ball-milled brake, gas, and clutch pedal pads will coordinate beautifully with any interior. Made of high-quality materials, they're designed to fit the original steel brake, gas, and clutch pedals. No drilling is needed to mount the pads, and many are available with a rubber insert for extra comfort and safety. Order the size, shape, and pedal position needed for your vehicle. Midnight Series pedal pads' smooth finish and style make them perfect for any interior.
( 37 )
$43.95
—
$96.95
Bowler Performance clutch pedal conversions change your vehicle from a factory automatic to a manual. These packages utilize your existing brake pedal hanger to add on the clutch pedal system, and will work with an OE-style hydraulic clutch master cylinder or convert to Bowler's hydraulic master cylinder kit. Each package will include clutch pedal and bracket, pedal pad and rubber grips, and all necessary hardware.
( 1 )
$387.99
Dorman pedal pads are designed to replace your factory originals that have seen better days. Tough and practical, they stand up to all the elements--including harsh winter salt. Their true value, however, lies in safety: made of hardened rubber to stop shoes from slipping, they can be counted on to withstand continual wear and tear. Dorman pedal pads are available to fit the brake, clutch, accelerator, and parking brake positions. They install easily--just slip the pad onto the pedal. Where applicable, they are often sold in sets of two.
( 93 )
$4.99
—
$10.99
OER brake pedal clevises are universal-fit for many potential uses. They measure approximately 2 in. long, and are tapped for 3/8-24 fine thread. OER clevises are offered chrome plated to add some sparkle to your brake components or zinc plated for superior corrosion resistance. You can connect a brake master cylinder, or power brake booster pushrod to the brake pedal arm with OER brake pedal clevises.
( 3 )
$12.99
OER offers original factory accelerator pedal ball studs designed for use on various GM models. Accelerator pedal ball studs can break after many years of use and will need to be replaced. It is always good practice to check your stud for wear when replacing the gas pedal linkage components. These ball studs are designed to mount to the floor pan. The accelerator pedal pivots on the ball stud. Sold individually. Two required per vehicle. Please note, this part may require washers for proper height, which are sold separately.
Not Yet Reviewed
$7.99
Lokar pedal pads are designed to coordinate beautifully with any interior. They're available in a variety of sizes, shapes, and materials for fitment on gas, clutch, brake, dimmer switch, and emergency brake pedals. Most models include durable rubber inserts for no-slip footing. Order the universal-fit or application-specific pads recommended for your vehicle.
( 102 )
$43.95
—
$96.95
OER accelerator rod grommets and sleeves are manufactured to OE specifications to meet or exceed the quality of the originals. These reproduction grommets and sleeves are used in the throttle arm and carburetor linkage where the accelerator rod is mounted. Order the parts designed for fitment on your vehicle application.
( 17 )
$6.99
Level 7 Motorsports 1967-72 C10 hydraulic pedal assemblies give you a complete bolt-in pedal assembly with integrated hydraulics. For years companies have offered fairly comprehensive manual transmission packages with the transmission, bellhousing, clutch, shifter—even master and slave cylinders. However, perfecting the pedal ratio, selecting the correct bore master cylinder, and mounting everything correctly leaves too much room for error. Now you can get on the road with less headache. You simply drop your steering column, install the pedal assembly, connect the hoses, bleed the system, and start banging gears! Take your vintage truck to the next level with Level 7 Motorsports 1967-72 C10 hydraulic pedal assemblies. Other product features and items include: * All necessary fittings and hoses * Tilton master cylinder * Black anodized aluminum remote reservoir * Powdercoated satin black pedal assembly * Your choice of OEM-style standard or deluxe (with trim) pedal pads * Pivot bushings and hardware * Perfected pedal ratio * Optimized master cylinder bore diameter
Not Yet Reviewed
$1,635.99
—
$1,655.99
The Stop Shop pedal pivot shaft clips fit many classic models. These retaining clips hold the brake or clutch and brake pedal to the shaft. They also fit most 1963 to 1972 models, compatible with Chevelle, Camaro, Nova, Firebird, Corvette and more. These must-have parts fit all automatic/manual transmission models and are manufactured to the highest quality standards.
( 1 )
$7.99
United Pacific pedal pads are a great choice for your hot rod! These well-made, attractive pads are constructed from quality materials and are easy to install.
( 24 )
$5.99
Stop the vibration and restore stability and pedal function with Dorman pedal shaft bushings. Made of high-density plastic to resist breakage and withstand wear and tear, they're easy to install and you don't need to replace your pedal. Dorman replacement parts are available in a variety of sizes, depending on the application.
( 2 )
$6.99
—
$11.99
Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.
( 8 )
$594.95
Level 7 Motorsports 1973-87 C10 drive-by-wire throttle pedal brackets include stainless steel mounting hardware and bolt into the existing C10 throttle pedal location to properly locate a 2005-13 Corvette pedal in the correct position. Take your vintage ride to the next level with Level 7 Motorsports 1973-87 C10 drive-by-wire throttle pedal brackets. Other product features and items include: * Powdercoated heavy-duty steel bracket * Stainless steel ARP fasteners * Anodized aluminum beauty washers for engine bay side of firewall * Optional GM Corvette throttle pedal available separately
Not Yet Reviewed
$104.99
GM Genuine Parts brake pedal push rod retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Select the correct ones to fit your vehicle.
( 2 )
$3.99
—
$17.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
