Automotive Ignition & Electrical Supplies at Summit Racing

Eddie Marine Billet Aluminum Mercury Transom-Mount Trim Switch Covers

Eddie Marine Mercury transom-mount trim switch covers dress up your stock Mercury trim switch. These panels are machined out of 6061-T6 aluminum on precision CNC mills and are offered polished or in a variety of Fusioncoated colors. These Eddie Marine covers are further enhanced with state-of-the-art laser engraving, which gives the graphics the cleanest look possible.

3.0 out of 5 stars ( 2 )

$48.95

Eddie Marine Forward-Reverse Relay Boxes

Eddie Marine forward-reverse relay boxes are replacements for their trim tabs and can also be used with hatch actuators. By incorporating one of these boxes, the possibility of voltage drop will be eliminated and the actuator will be supplied with a full 12 volts of current at all times, regardless of the length and age of the power supply wires. The boxes contain two relays encapsulated in epoxy for corrosion resistance—and they also allow the use of a single-pole switch to operate reverse polarity actuators, as well as accommodate two actuators simultaneously. Ensure that your actuator will operate at its maximum speed with an Eddie Marine forward-reverse relay box.

5.0 out of 5 stars ( 1 )

$92.00

Universal Air Conditioner Blower Motor Resistors

Universal Air Conditioner blower motor resistors will restore your control to regulate motor speed, allowing you to enjoy perfect comfort in your car. They are economical, quality-made components that are built to last. Choose the one designed for your vehicle.

Not Yet Reviewed

$27.99

KaferLab Switch Trim Ring Magnetic Covers

KaferLab is dedicated to delivering the coolest parts for your vintage Volkswagen, and their switch trim ring covers are ready to add a classy, finished look to your VW's dash. KaferLab switch trim ring magnetic covers are machined from billet alloy, and then painted to a perfect factory color match, providing strong, long-lasting, and great looking switch covers. Plus, they are available in several colors and magnetic, making them easy to install or change whenever you would like a different color accent for your interior. Choke, fog lamps, ignition, headlight, and wiper switch covers are available. Complete the look of your VW; select the switch covers in the style and finish preferred.

Not Yet Reviewed

$24.95

Haltech 12 Position Rotary Trim Modules

Haltech offers a wide range of data acquisition components, including this 12-Position Rotary Trim Module (Boost/Fuel/LGN, etc.). It includes two position decals and a matching set of Deutsch DTM 3 connectors (HT-031014).

Not Yet Reviewed

$82.00

Trim Parts Electric Windshield Wiper Actuators

Trim Parts, Inc. manufactures GM-licensed restoration parts, like these electric windshield wiper actuators, for Chevrolet and other GM cars and trucks. Trim Parts is dedicated to manufacturing the highest quality products offered in the restoration industry. Trim Parts uses the original GM tooling under licensing from GM when tooling is available. Otherwise, Trim Parts engineers and builds in-house tooling to meet the original GM specifications and Trim Parts quality. When you see the GM Restoration Parts emblem associated with Trim Parts restoration parts, you can be assured that each part is licensed by General Motors for reproduction and meets GM guidelines for quality and authenticity.

Not Yet Reviewed

$32.99

Eddie Marine Standard Weatherproof Rocker Switches

Eddie Marine standard weatherproof rocker switches are offered in single-throw and double-throw functions. Single-pole switches have three push-on terminals, and on/off models have red illumination. Eddie Marine double-pole models have six push-on terminals. Connect your pumps, lights, blowers, hatch actuators, trim tabs, horns, bilge pumps, and more with the selection of Eddie Marine weatherproof rocker switches.

Not Yet Reviewed

$15.00

—

$21.00

Sierra Marine Starter Solenoids

Sierra Marine starter solenoids are OE replacements for specific watercraft applications. These solenoids are built to factory specs to restore the starter performance you rely upon.

Not Yet Reviewed

$22.99

—

$25.99

Sierra Marine Electrical Relays

Sierra Marine offers electrical relays for a wide range of watercraft makes—including OMC, Volvo Penta, CDI, Force, Mallory, Mercruiser, Mercury, and US Marine. These 12 V replacements can help restore the performance you expect.

Not Yet Reviewed

$17.99

—

$25.99

Eddie Marine Billet Aluminum Switch Panels

Eddie Marine is the largest supplier of custom switch panels in the performance marine industry. These billet aluminum switch panels are machined from 6061-T6 aluminum on precision CNC mills and are offered polished or Fusioncoated. To further enhance the look of the panels, they're laser engraved for the cleanest graphics possible. The switch panels are available in a large variety of configurations to fit your electrical needs.

5.0 out of 5 stars ( 1 )

$264.95

Detroit Speed Door Jamb Wiring Boot Kits

Detroit Speed door jamb wiring boot kits are universal and provide an attractive solution for routing wiring to the doors in your custom car build. The EDPM rubber boots provide an OE-style appearance and wiring protection. Kits are available with or without billet trim rings to further customize your vehicle. Features: * EPDM rubber boots with retainer clips * Requires 2 in. hole in body for mounting * Hardware included * Internal diameter accommodates up to 1.30 in. * 3.5 in. nominal length with 3 to 4.25 in. install range * Billet aluminum trim rings available machined or black anodized

Not Yet Reviewed

$47.95

—

$157.95

aFe Programmer Mounts

aFe programmer mounts safely secure your device to windshield or dash for the easiest viewing and use. Both styles feature ultra-strong high-powered magnets that hold your Scorcher Pro or mobile device in the angle you want it, and they will not damage your device. Their cradle-free, open design allows full access to all controls and ports for safe and easy one-handed use. The windshield mount features a heavy-duty suction cup base that securely adheres to your windshield glass and includes a 90 degree HDMI elbow that eliminates potential strain on your port and ensures your wires stay tucked perfectly away for a clean-looking setup for your Scorcher Pro. The dash-mount styles, MagicMounts, can support heavier devices from your Scorcher Pro to your tablet. They feature 360 degree swivels to get just the right angle and soft rubber locking nuts to keep that angle. They also offer a stylish flair with included interchangeable trim rings.

Not Yet Reviewed

$30.00

—

$38.00

ACDelco Replacement Switches

ACDelco offers various electrical switches—including door lock, turn signal, ignition, trunk, HVAC, sensors, dimmers, brake lights, windshield wipers, and more for most vehicles on the road today. These replacements are manufactured to original equipment specifications to ensure proper fitment and performance. Order the switches recommended for your applications.

4.37 out of 5 stars ( 59 )

$4.99

—

$218.99

Painless Performance 26-Circuit 1970-72 Direct-Fit Chevelle Harnesses

Painless Performance 26-circuit 1970-72 Direct-Fit Chevelle harnesses give you everything you need, plus more! Not only are there provisions for connecting standard factory components, they also offer what you need for aftermarket parts. Various pigtails and light sockets are provided, so the harnesses easily fit mismatched cars (1971-72 cars with 1970 front ends, or 1970 cars with 1971-72 rear bumpers). The gauge cluster pigtail allows for the square "full sweep dash" harness and includes a Super Sport cluster pigtail. This makes it easy for those with a full sweep dash to swap to an SS-style cluster at a later date by undoing only one connector and plugging in the separate pigtail. Additional details: * Harness follows the same routing as the factory harness—allowing you to use OE attachment points * Numerous components have the connectors and terminals pre-installed to make connections plug-n-play * All exterior lights have the correct sockets and bulbs pre-installed * Extra length is added to the headlight section to be routed behind the driver side inner fender for a cleaner look * 6-gauge charge wire and 100 amp MIDI fuse * Fully integrated ground circuit * Factory-style precision molded fuse block can easily be installed in the OE location * Updated ATC-style fuses ensure that the 26 circuits stay protected and safe * Backside of the fuse block has an OE-style bulkhead connector so no trimming or cutting of your firewall is required * Plug-and-play design makes the install easy, no matter your options * Included console harness can be easily added at any time * Each pre-terminated connector is tagged for easy routing and installation * 120+ page manual is full of color schematics, photos, and step-by-step instructions Notes: * Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring * The switch power wire for OE power window/locks and A/C are included * Also included is a blower motor harness for heat-only systems

4.8 out of 5 stars ( 10 )

$1,014.99

Banks Power PedalMonster Throttle Response Enhancers

Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal

4.74 out of 5 stars ( 38 )

$319.00

DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems

DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting

5.0 out of 5 stars ( 2 )

$829.99

—

$869.99

Z Automotive Tazer Programmers

Unlock the hidden potential in your Mopar with Z Automotive Tazer programmers. These programmers plug into your OBD II port and allow you to enable features that exist in your vehicle from higher trim levels or packages disabled by the factory. Unlock features that will allow a backup camera, factory fog lights, daytime running lights, line lock functions, Light Show mode, and more. Specific features of Z Automotive Tazer programmers include: * Enable factory sport mode for 5-speed vehicles with 8.4 in. and 4.3 in. Uconnect screens (2012-14 Charger/300) * Enable factory sport mode for 8-speed vehicles (2012-17 Charger/300, 2015-17 Challenger) * Enable SRT performance pages on 8.4 in. Uconnect screen (2012-14 Charger/300) * Enable SRT performance timers in EVIC display (2012-18 Charger/300/Challenger) * Enable drive modes—street/sport/track/valet/custom/ECO (2015-18 Scat Pack Charger/Challenger) * Enable support of added factory paddle shifter (2012-18) * Force RWD mode for AWD cars/trucks (2012-17 Charger, 2014-17 Jeep GC SRT, 2014-17 Durango with electronic transfer case) * Manually shift gears using steering wheel cruise plus/minus buttons (2012-14, 5-speed only)

4.75 out of 5 stars ( 12 )

$249.00

Haltech Multi-Function CAN Gauge

Haltech's new multi-function CAN gauge displays real-time data from your Haltech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy-to-use app on your smartphone or tablet uses a wireless connection to the gauge for easy setup and customization. * Set up via gauge-mounted buttons or a mobile app * High-contrast, dimmable OLED display * 1, 2, or 4 gauge layouts on up to 10 different pages * Custom warning points with special warning screens SUPPORTED PARAMETERS: Boost Pressure Air/Fuel Ratio Coolant Temperature Fuel Pressure Ethanol content Air Temperature Battery Voltage Coolant Pressure EGT Fuel Level Fuel Trim Gear Position Injector Duty Nitrous Pressure Oil Pressure RPM Transmission Line Pressure Throttle Position Transmission Oil Temperature Turbo RPM Wheel Speed Wheel Slip * Above can be displayed without additional sensors. COMPATIBLE WITH: Haltech Platinum Sprint Series Haltech Platinum Sport Series Haltech Pro Plugin Series Haltech Elite Series Haltech Nexus Series

Not Yet Reviewed

$430.00

ACDelco GM Genuine Parts Ignition Control Modules

ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.

5.0 out of 5 stars ( 4 )

$20.99

—

$328.99

Ron Francis Wiring Synergy Series Headlight Switches

Install beautiful dash controls from Ron Francis Wiring. Their selection of Synergy headlight switches offers color trim choices to fit your interior with elegance. These slim, tapered knobs are polished and accented with your choice of four colors. Ron Francis Synergy headlight switches are available with a built-in dimmer switch in a 3-position pull knob or with dome lights, headlights, running lights, and a dimmer for the dash with a built-in circuit breaker for the headlights. For first-class dash control looks, choose Ron Francis Synergy headlight switches.

4.25 out of 5 stars ( 28 )

$56.79

—

$59.73

FiTech Go-Spark Ceramic Spark Plug Wire Sets

Enjoy better reliability and performance with FiTech Go-Spark ceramic spark plug wire sets. Each spark plug is preassembled from ceramic and carefully crafted with the proper end angles in mind, sparing you the hassle of custom trimming. Select the spark plug wire set designed for your application needs.

5.0 out of 5 stars ( 1 )

$120.00

—

$135.00

PerTronix Flame-Thrower Ignition Modules

Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.

3.93 out of 5 stars ( 42 )

$70.00

—

$128.90

Z Automotive Tazer Programmers with Double Bypass

Unlock the hidden potential in your Mopar with Z Automotive Tazer programmers with double bypass. These programmers allow you to enable features that exist in your vehicle from higher trim levels or packages but are disabled by the factory. They plug into existing vehicle connectors, adding an OBD II port in the trunk. While necessary for 2018 and up models, it also works on earlier models for a trunk relocation. You can unlock features like enabling a backup camera, factory fog lights, daytime running lights, line lock functions, Light Show mode, and more. Specific features for Tazer programmers with double bypass include: * Enable factory sport mode for 5-speed vehicles with 8.4 in. and 4.3 in. Uconnect screens (2012-14 Charger/300) * Enable factory sport mode for 8-speed vehicles (2012-17 Charger/300, 2015-17 Challenger) * Enable SRT performance pages on 8.4 in. Uconnect screen (2012-14 Charger/300) * Enable SRT performance timers in EVIC display (2012-18 Charger/300/Challenger) * Enable drive modes—street/sport/track/valet/custom/ECO (2015-18 Scat Pack Charger/Challenger) * Enable support of added factory paddle shifter (2012-18) * Force RWD mode for AWD cars/trucks (2012-17 Charger, 2014-17 Jeep GC SRT, 2014-17 Durango with electronic transfer case) * Manually shift gears using steering wheel cruise plus/minus buttons (2012-14, 5-speed only)

4.0 out of 5 stars ( 5 )

$299.00

Stromberg E-Fire High Performance Spark Plug Wires

Stromberg E-Fire High Performance spark plug wires are designed for flathead Ford applications—whether you have a front mount (59A) or top mount (8BA) distributor. Designed to work with both electronic and points-style distributors, E-FIRE plug wires give you strong fire power with high-level RFI/EMI resistance. The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100 percent silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs. With the Ford flathead engine firmly in mind, Stromberg designed the 90-degree cap terminals and boots to be pre-fitted for smarter 'distributor first' installation. This eliminates the difficult task of trimming front mount wires up close to the radiator where access is limited—and also leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod terminals. All leads are 7mm diameter, so they fit through your flathead plug wire looms or tubes. They're cut to length, too, with a long coil wire to reach your firewall.

5.0 out of 5 stars ( 3 )

$65.00