Automotive Ignition & Electrical Supplies at Summit Racing

Powermaster HPR Small Frame Series Alternators

Powermaster small frame HPR small frame series alternators produces enough current to keep your electronics running and your battery charged. With over 145 amps at idle and 180 amps at top end, these Hairpin Replacement alternators deliver the charging capabilities you need. Features, specs and items may include: * Efficient internal components produce more output, while consuming less engine power * Voltage compatibility: 12 V * Designed as a direct replacement for four popular housings; straight 6.61 in. mount, 6.14 in straight mount, offset left 5.31 in. mount, and 2 in. spool mount * One-wire connection on most models * Supplied with a V-belt or serpentine pulley * Bolts into many aftermarket front accessory drive systems * Available with different finishes

4.38 out of 5 stars ( 21 )

$261.99

—

$410.99

On Sale

Holley Sniper HyperSpark Ready to Run Small Cap Distributors

Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation

3.5 out of 5 stars ( 2 )

$562.95

$310.11

—

$562.95

Antigravity Batteries Small Case Lithium-Ion Batteries

Antigravity Batteries small case lithium-ion batteries offer the most power and performance, in the most compact size of any lightweight lithium-ion powersports battery. Their power ranges from 120 to 480 cranking amps, capable of starting the larger V-Twin applications, yet only weighing as little as 1 lb. up to 4 lbs.

4.33 out of 5 stars ( 3 )

$119.99

—

$289.99

FFP Customs Small Block Ford Smart Coil Mounts

FFP Customs Smart Coil mounts are designed for a small block Ford with the stock-style valve cover bolt pattern. No welding or drilling is required; FFP has designed this as a quick and easy bolt-on and go. The mounts utilize the top two valve cover mounting holes to fasten in place. All necessary hardware is included for mounts and coils. Mounts are available for a wide range of Ford applications from the 1960s and up.

Not Yet Reviewed

$184.99

Antigravity Batteries Special Voltage Small Case Lithium-Ion Batteries

Antigravity Special Voltage Series 6 V lithium batteries are perfect replacements for the original, bulky lead-acid battery in your classic bike, and offer an incredibly compact fit compared to the large 6 V battery. Antigravity Special Voltage AG lithium batteries are small case formats available in 8- or 12-cell models. Both are designed for those who ride older bikes that run the 6 V system, and they are very reliable, small replacements with great performance benefits. Choose the power you need. Additional notes: * Adhesive-backed foam included for easy installation * Ultra-compact * Ultra-lightweight * High-power lithium-ion motorsport battery * Large all-brass terminal design * Can hold a charge up to a year provided there are no "parasitic drains" * Ideal for custom builds, like café racers or small bore customs, up to 1000cc

Not Yet Reviewed

$179.99

AEM Electronics Tesla Small Drive Unit Control Boards

AEM Electronics Tesla small drive unit control boards allow you to install a Tesla SDU in any non-OEM application, unlocking complete control when paired with an AEM VCU. The system provides full control of the SDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. AEM EV's Tesla inverter control boards act as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's SDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. Note: Inverter control boards must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla SDU. This system is designed for conversion and motorsports vehicles with Tesla SDU swaps. It will not control a Tesla SDU in a Tesla OE chassis. Features: * Programmable, direct replacement for Tesla SDU inverter control board (ICB) * Allows for customized control of torque and regenerative braking curves, torque rates, and motor spin direction via CAN to allow for Tesla Small Drive Unit installation in any desired orientation for retrofit applications * SDU board works with both front and rear variants of the Tesla SDU

Not Yet Reviewed

$1,126.95

Summit Racing™ Mini High-Torque Starters

You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.

4.49 out of 5 stars ( 709 )

$147.99

—

$225.99

Summit Racing™ Blueprinted HEI Distributors

Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.

4.44 out of 5 stars ( 1256 )

$112.99

—

$347.99

On Sale

MSD Ignition Control Units

MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.

4.86 out of 5 stars ( 37 )

$562.95

—

$564.95

$505.95

—

$507.95

On Sale

MSD Pro-Billet Distributors

MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

4.74 out of 5 stars ( 409 )

$849.95

$350.95

—

$763.95

On Sale

MSD Street Fire HEI Distributors

Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.

4.55 out of 5 stars ( 291 )

$222.95

—

$255.95

$200.65

—

$230.35

On Sale

MSD Pro-Billet Ready-to-Run Distributors

MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.

4.31 out of 5 stars ( 334 )

$870.95

$459.95

—

$782.95

Powermaster XS Torque Starters

Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.

4.56 out of 5 stars ( 917 )

$184.99

—

$339.99

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.65 out of 5 stars ( 2005 )

$290.95

$108.85

—

$306.95

Powermaster Ultra Torque Starters

Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.

4.44 out of 5 stars ( 248 )

$275.99

—

$372.99

On Sale

Holley Sniper EFI HyperSpark Distributor Kits

Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation

4.22 out of 5 stars ( 23 )

$1,024.95

$921.95

On Sale

Holley Sniper EFI HyperSpark Distributors

Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.

4.24 out of 5 stars ( 127 )

$716.95

$413.95

—

$649.95

Summit Racing™ Billet Distributors

Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.

4.51 out of 5 stars ( 167 )

$188.99

—

$304.99

Summit Racing™ Ready-to-Run Billet Distributors

Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.

4.04 out of 5 stars ( 25 )

$249.99

—

$359.99

Powermaster PowerMax Plus Starters

Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!

4.52 out of 5 stars ( 1148 )

$141.99

—

$261.99

Summit Racing™ Distributor Gears

Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.

3.83 out of 5 stars ( 82 )

$19.99

—

$77.99

On Sale

Summit Racing™ Ignition Tune-Up Kit Pro Packs

Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.

4.71 out of 5 stars ( 51 )

$1,052.40

$158.89

—

$988.15

BluePrint Engines Starters

BluePrint engine starters feature billet aluminum mounting blocks and their "clockable" models can be rotated or turned for special clearance needs. BluePrint uses high-quality internals for long-life and durability. BluePrint engine starters are trusted by engine builders worldwide!

4.68 out of 5 stars ( 37 )

$159.99

—

$189.99

On Sale

MSD DynaForce Starters

MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.

4.56 out of 5 stars ( 243 )

$619.95

$390.95

—

$562.95