Ignitions & Electrical
Availability
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock and ready to ship.
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 21 )
$107.99
Tanks Inc. fuel pump safety switch and relay wiring kits are helpful when you're switching to an electric pump on a carbureted engine. Proper wiring is crucial to the performance and longevity of your fuel pump. Make sure that your fuel pump is receiving full voltage from the battery with this heavy-duty kit. It will provide a continuous supply of voltage to prevent drop-off that's common with OE wiring—which will protect your fuel pump from damage. Additionally these FPSSK kits feature an oil pressure safety switch to turn off the fuel pump in the event of oil pressure loss. Without a safety switch your fuel pump will continue to run, even if a fuel line comes loose or in the case of an accident. Once oil pressure is lost, this kit will turn off the power to the pump. Included with the Model FPSSK kit: * 50 amp relay with socket and pigtail * 30 amp circuit breaker * 15 ft. of 12-gauge fuel pump power wire * 5 ft. of 12-gauge relay power wire * 5 ft. of 14-gauge relay ground and trigger wire * 10 ft. of 16-gauge starter wire * 10 ft. of 16-gauge ignition wire * 1/8 in. NPT male to 1/8 in. NPT female brass tee fitting * 3-prong oil pressure safety switch * Includes terminals and mounting hardware
( 4 )
$69.99
Mr. Gasket fuel pump safety switches are designed to shut off your electric fuel pump when the oil pressure drops below 15 psi. They are easy to install into the oil pressure sending unit, and will work with all 12 V systems.
( 6 )
$41.64
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 25 )
$22.99
—
$32.99
Dorman engine oil accumulator solenoid valves are made from durable materials for reliable performance. Oil pump flow control valves often fail from varnish build-up, and the original manufacturer requires replacing the entire oil pump assembly. These Dorman oil pump flow control valves are quality replacements for a clogged or damaged original equipment control valve and are an excellent value compared to the original equipment part.
Not Yet Reviewed
$52.95
Carter oil pressure safety switches shut down your engine when your oil pressure drops below 7 psi, saving your engine from damage. These switches come with complete instructions and a wiring diagram.
( 41 )
$27.99
ACDelco offers various electrical switches—including door lock, turn signal, ignition, trunk, HVAC, sensors, dimmers, brake lights, windshield wipers, and more for most vehicles on the road today. These replacements are manufactured to original equipment specifications to ensure proper fitment and performance. Order the switches recommended for your applications.
( 57 )
$22.99
VDO oil pressure safety switches are designed to sense when oil pressure drops below a specific minimum pressure—and shut-off the fuel pump for precaution. The heavy-duty replacement switches are available in a variety of pressure ranges. Select the model best suited for your application.
Not Yet Reviewed
$21.79
—
$54.99
The 6001Z series from Auto Rod Controls is the latest in control module innovation from ARC! Based on ARC's exclusive flat touch technology this new system is packed with new features that racers not only want but need in an electrical system. This new system incorporates a built-in system kill switch like some of our other units, but to keep the size of the unit down we developed multi-function switches. The water pump and fan are on the same switch. Touch the switch once to turn the water pump on and touch it again to turn on the water pump and the fan. The water pump and fan have separate relays but share one switch. The same holds true for the taillight switch, one touch turns the taillights on the second touch turns out the taillights and turns on the new built in interior lighting which is available in blue or white. Other innovations include ARC's exclusive oil pressure control. The system with monitor the oil pressure through a user chosen pressure switch and if the oil pressure falls below the switch setting it will automatically turn the ignition off. ARC also incorporated a neutral safety into the relay board. Simply connect the supplied wires from the relay board to the neutral safety switch and you are done. The car will not start unless the shifter in in a proper location for starting. This system also has a firewall bump start switch circuit built in. Simply run a supplied wire from the relay board to the bump start switch and ground the switch and your bump start switches are ready for use. These will also work through the neutral safety switch for complete safety. ARC's 6001Z series control modules include printed wire for the car and a user activated ground trigger relay for any use. We also included a dedicated 5-amp data logger circuit which will stay on for 6 seconds after shutting off the ignition to allow for processing. Rounding out this system are 2 30 amp fused power take offs for any use. ARC also includes LED's at every output on the relay board to quickly see if there is power leaving the relay board to the accessory connected to it.
Not Yet Reviewed
$840.99
—
$948.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 70 )
$19.99
—
$32.99
Mopar Replacement distributor rotors are genuine OE replacements offering the right fit, function, and peace of mind. The rotors work in conjunction with other ignition components to keep your Chrysler, Dodge, or Jeep firing properly and staring every time. Keep the energy flowing by making the best choices to service your vehicle--Mopar Replacement distributor rotors.
( 4 )
$29.99
Your vehicle has countless electrical switches—powering everything from turn signals and ignition … to HVAC and interior accessories. A faulty switch can cause immediate headaches. Beck/Arnley offers a variety of replacement switches to cover many functions and vehicle applications. They're tested for performance and proper fitment. Order the model recommended for your electrical needs.
( 5 )
$80.99
These Standard Motor Products replacement distributor gears will replace those old or worn out units to keep your distributor working like new. They are made to meet or exceed OEM specifications and are available for a variety of applications.
Not Yet Reviewed
$10.99
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 25 )
$899.99
These Longacre Racing fuel pressure safety switches are designed to shut off the ignition or fuel pump when oil pressure drops below a certain psi. This helps to prevent engine damage and fire and keeps the motor from starting until the oil pressure is up.
( 2 )
$19.99
—
$39.99
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$89.35
—
$131.95
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 7 )
$349.95
—
$435.95
Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)
Not Yet Reviewed
$3,003.41
—
$3,961.32
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
AEM Electronics Tesla small drive unit control boards allow you to install a Tesla SDU in any non-OEM application, unlocking complete control when paired with an AEM VCU. The system provides full control of the SDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. AEM EV's Tesla inverter control boards act as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's SDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. Note: Inverter control boards must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla SDU. This system is designed for conversion and motorsports vehicles with Tesla SDU swaps. It will not control a Tesla SDU in a Tesla OE chassis. Features: * Programmable, direct replacement for Tesla SDU inverter control board (ICB) * Allows for customized control of torque and regenerative braking curves, torque rates, and motor spin direction via CAN to allow for Tesla Small Drive Unit installation in any desired orientation for retrofit applications * SDU board works with both front and rear variants of the Tesla SDU
Not Yet Reviewed
$1,099.95
Install a Tesla Sport Large Drive Unit (LDU) in any vehicle—and achieve complete control with AEM EV's Sport LDU Inverter Control Board (P/N 30-8410) and an AEM VCU! This system provides full control of the LDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. The Tesla LDU currently comes in two versions, Base and Sport. AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's Sport LDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. NOTE: The Inverter Control Board must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla Sport LDU. This system is designed for conversion and motorsports vehicles with Tesla Sport LDU swaps. It will not control a Tesla Sport LDU in a Tesla OE chassis.
Not Yet Reviewed
$1,049.95
Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.
( 23 )
$51.99
—
$231.99
It's always a good idea to place a safety switch in the circuit when installing an electric fuel pump. Holley safety fuel pressure switches will ensure the electric pump will not work unless the engine has oil pressure. It will prevent the pump from running in a situation where the motor may stall with the ignition on. Wiring the switch through the starter solenoid circuit energizes the pump on engine start-up. After the engine is running, the switch continues to provide power to the pump as long as there is oil pressure to keep the switch turned on.
( 17 )
$53.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
