Ignitions & Electrical
Availability
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock and ready to ship.
Showing In Stock Items. Show All 315 Items.
To maintain voltage continuity to your engine computer, clock, and radio memory when your vehicle battery is disconnected, be sure that you're using battery maintainers from Performance Tool. These computer memory keepers use a 9 V battery, not included, to plug into your vehicle's cigarette lighter outlet to retain radio presets, ECM codes, and learned procedures for up to four hours. Don't disconnect your battery until you have first hooked up with these Performance Tool battery maintainers!
( 4 )
$8.99
Holley Sniper EFI oxygen sensors are the best replacements for your system. When you need to service your Sniper EFI throttle body, Holley's list of parts include these O2 sensors to maintain a proper reading of oxygen levels in the exhaust. These replacement Bosch wideband sensors feature anti-seize pre-applied to sensor threads.
( 54 )
$160.95
Summit Bucks
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 316 )
$105.99
—
$294.99
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$165.50
—
$398.40
$148.95
—
$358.56
The new Ultra 6AL Series ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard: 0, 10, 20 degrees * Alerts and monitors available * High level of security connection from phone to ignition box (encryption), including sequence in push-button implementation * Maximum programmable retard of 30 degrees * Ignition boxes are available in red or black
( 8 )
$349.95
MSD magnetic pickup tach adapters maintain accurate tachometer readings. If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need one of these tach adapters. These units will correct the operation of most voltage-triggered tachometers that do not work directly off of the tach output terminal of your MSD unit.
( 71 )
$106.95
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 7 )
$467.95
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1013 )
$31.99
—
$82.99
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$592.00
$136.53
—
$532.80
Keep your 7.3L Godzilla engine firing on all eight cylinders with Ford Performance Parts Godzilla ignition coil and wire sets. They feature OEM coils, wires, and hardware. To maintain optimal performance of your Ford engine, choose Ford replacement parts.
( 2 )
$319.99
MSD Ultra 6A Series ignition boxes continue to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits—while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). The Ultra 6A Series features a capacitive discharge ignition design. The majority of stock ignition systems are inductive ignitions. In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing. At higher rpm, since there is less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss. Product features: * Plug-and-play upgrade to current installations with a 6201, MSD 6A * New processor and board design provide a highly efficient ignition, minimal heat and max spark energy with less current draw * 60 percent smaller and 50 percent lighter than the MSD Digital 6A (688 grams vs 344 grams) * High-RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance, and ensure complete combustion * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline rpm * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 V electrical systems * Connects to points and magnetic pickups * Fully protected against an open coil, shorted coil and open load * Compact design; full MSD power * Quickens throttle response and improves starting * Tach output to drive an external tachometer
( 9 )
$326.95
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
MechMan Elite Series cast alternators offer great output at idle RPM and excellent durability in a direct bolt-in package. Their 6-phase technology, combined with massive twin rectifier assemblies and 12 diodes, makes these alternators totally durable for daily use, while still maintaining great output at low-rpm. These alternators will make 180 amps at engine idle speeds—with a full 250 amp output at cruising speeds. The units come with an OEM diameter pulley, making them perfect for high-rpm and racing use. They're available for fitment on a wide range of cars, trucks, and vans from the 1990s and up. Order the model recommended for your application. (Note: Elite Series cast alternators may require a rectangle to oval adapter harness if your vehicle was equipped with the CS144 heavy-duty charging option from the factory. This is not common.)
( 7 )
$519.00
—
$549.00
Dragon Fire Street Series spark plug wire sets are specially designed to deliver higher performance over your factory OEM wires, while still maintaining the ability to be used as direct factory replacements. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your vehicle with a specialized set of Dragon Fire 1000 Street Series spark plug wires. Features and specs: * OEM-style terminals * Full EMI/RFI suppression technology * 500 ohm resistance * 500 degrees F high-temperature silicon * OEM-style silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * OEM-style stainless steel conductors * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 39 )
$54.95
—
$129.95
DiabloSport Pulsar XT Power Modules are an all-new take on drivability and calibration for your 5.7L Ram Hemi. Unlike any other device on the market, Puls0ar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest way to disable your V8's MDS system to eliminate 4-cylinder mode and keep that Hemi running on all 8, all the time. The built-in throttle pedal sensitivity control also helps you fine-tune your pedal feel to eliminate throttle lag and make your Hemi drive like you want it to. Why spend thousands on different devices and hope they'll work together when Pulsar XT does it all in one simple 15-minute install with state-of-the-art smartphone app control. Enjoy Pulsar XT's shift-on-the-fly pedal programming, with seven levels changeable through your steering wheel controls. The smartphone app allows you to adjust your speedometer for larger tires, transfer case ratio changes, and gear ratio changes—along with adjusting TPMS settings, disabling your Auto Start/Stop, and checking and clearing DTC's. You'll love the way your Ram Hemi reacts with Pulsar XT, with improved throttle response, tire size calibration, and improved drivability running in V8 all the time. (Fits new body style E-Trq and Non E-Trq models.) Additional details: * Disable multi-displacement system to maintain V8 all the time (MDS) * User adjustable throttle booster settings (7 pre-set levels plus factory) * Calibrate for tire sizes 28-40 in. (any size entered above 33.9 in. may disable Park Sense and Blind Spot Monitoring, in some applications) * Improves throttle response and drivability * Disable Engine Auto Start/Stop * Adjust TPMS warning threshold (25-99 psi) * Gear ratio adjust for 2.73-5.38 * Read and clear DTC's * Smartphone app control for Android and IOS * Check emissions readiness status * Enable transmission gear display in Drive Mode * Enable/disable traction control kill * Remember previous Tow/Haul setting on start up *This device is not a power adding device, it is not changing ECM calibrations, and is easily removed for dealer service
( 2 )
$499.95
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$280.10
$183.81
—
$252.09
It's a good idea to relay your fuel pump for the street and a must when you're racing. Designed specifically to prevent voltage drops at the fuel pump to maintain constant fuel pump pressure and to prevent fuel pump amperage overloads from damaging the vehicle's electrical system. Designed for the harsh conditions encountered off road, this relay kit provides complete protection from the elements to ensure reliable and dependable performance.
( 13 )
$48.99
FiTech offers a variety of accessories and components for Go EFI Systems including oxygen sensors. These sensors are for replacing or upgrading existing parts and help to keep your vehicle running at top performance with long-term durability and reliability. Maintain fuel efficiency and emissions standards with the FiTech oxygen sensor best suited for your application.
( 6 )
$111.00
FAST EZ-EFI 2.0 Multi-Port Retro-Fit kits allow owners of existing factory or aftermarket multi-port fuel injected applications and intake manifolds to experience the benefits of an EZ-EFI 2.0 system with no limit on horsepower—because the systems are based on each customer's supplied injectors. The next generation of the revolutionary self-tuning EZ-EFI has been upgraded with more features than ever before. Yet it maintains ease of use that doesn't require a laptop or tuning experience. As with the original EZ-EFI, simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0 tunes itself as you drive. The new high-quality wiring harness (with a sleek mesh-type loom) uses commonly available late model OEM sensors for accuracy and durability. The EZ-EFI 2.0 has an updated hand-held, as well, featuring the industry's first color touch screen. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS—meaning there are nearly limitless mounting options (suction cup mount is included with all kits). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features, including screen hide/sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits—and all kits work with wet nitrous systems, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition features an EZ-Solution option, meaning that it is plug-and-play with FAST Dual-Sync distributors for electronic timing control, or can be used with an EFI distributor of your choice and a FAST crank trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor where timing is set manually. Experience the advantage of fuel injection without the headaches; order a FAST EZ-EFI 2.0 Multi-Port Retro-Fit kit.
( 10 )
$1,589.95
Painless Performance universal fuel pump relays will prevent voltage drops at the pump, thus maintaining constant fuel pump pressure, and will prevent fuel pump amperage overloads from damaging your electrical system. These kits are great for street use, and a must for racing applications.
( 55 )
$31.99
ARC Pro Mod Flat Touch switch panels with backlit system kill switch are truly unique! These Flat Touch switch panels use no electronics, which makes them immune to EMI and RFI interference. Units master kill switch is designed to turn off any, none, or all the switches at the same time for safety during competition racing. Available in 4-switch, 8-switch, or 12-switch configurations, each module comes with a selection of race words for switch labeling. White face switch modules have text labels backlit red when the switch is off, allowing you to not only see where, but what each switch is. When the switch is turned on the backlight changes from red to green. Black face switch models are equipped with nightglow, and function exactly the same as white face switch modules but feature illuminated text and outer perimeter that automatically increases the unit's brightness at night to maintain better visibility in low light vehicles.
Not Yet Reviewed
$864.99
On Sale
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.25
—
$223.30
$121.72
—
$200.97
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 137 )
$433.40
—
$479.55
$368.58
—
$431.60
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$36.50
—
$53.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
