Automotive Ignition & Electrical Supplies

Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing...

Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock...

Individual Parts

Part Groups

Results 1 - 7 of 7

Wiring Specialties Pro Series Wiring Harnesses

Wiring Specialties Pro Series wiring harnesses offer the best in aesthetics, weight savings, and reliability. Even better, the installation is simple and efficient! Check out the features and benefits, then completely replace your old harness and forget about electrical gremlins--thanks to Wiring Specialties Pro Series harnesses. Pro Series features and benefits: * Plug-and-play installation: The engine requires only 3 wires to be connected--starter signal, ignition signal, and fuel pump * No cores and additional wiring required * Point-to-point digital test on every wire * Constructed using OEM connectors and TXL Automotive wire with OEM colors * Made with high temp TXL wire (-40C to +125C operating temperature) with adhesive shrink tubing * Wrapped in lightweight nylon loom with -94C to +257C operating temperature * They have integrated transmission harnesses, and allow more customization when selecting options like ECU, injector, and AFM connectors * They use high-temperature braided sleeving, and are built to exceed OEM specs for wire temperature rating, quality, and power/ground routing * The harnesses are designed from the ground-up for performance, optimization and modularity, plus they're "tucked" for a clean professional appearance * Developed in-house on actual engines to ensure a perfect fit to the engine and chassis. * Wiring Specialties use an OEM-style wiring construction process. They utilize hydraulic crimping machines that crimp wire and terminals with over 2000 lbs. of force. All of their harnesses undergo a wire-to-wire electronic test after assembly, to ensure that no wire pinout mistakes were made during assembly.

Not Yet Reviewed

$819.00

Holley HP EFI ECU and Harness Kits

Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff

4.44 out of 5 stars ( 25 )

$2,599.95

—

$2,849.95

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.31 out of 5 stars ( 88 )

$1,739.95

—

$2,449.95

ICT Billet Wiring Connectors

ICT Billet has your engine swap covered with their ECM wiring connector kits. These terminals, retainers, and connectors are all designed to work with OE sensors and factory connectors for the easiest installation possible! This is one area that you don't want to use poor quality components—which are subject to crimps, twisting, and unseated terminals. If the wiring has conductivity issues, your engine will run poorly, and the problem is hard to diagnose. ICT Billet has built its reputation on dependable, high-quality parts. Order the kit preferred for your application.

Not Yet Reviewed

$18.99

—

$48.99

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.5 out of 5 stars ( 92 )

$1,299.95

—

$1,399.95

Holley Terminator LS Plug-and-Play Multi-Port Systems

Take control of your engine a Holley Terminator LS plug-and-play multi-port engine management system. They include all the necessary parts to control the fuel, spark, 4L60/4L80E or 4L60E/4L80E transmission, the vehicle's drive-by-wire, or some combination of those (depending on the application) on your stock or mild LS. Order the model recommended for your year/make and engine application. Holley Terminator LS plug-and-play multi-port systems include: * Terminator EFI ECU * Terminator hand-held controller with 3.5 in. full-color touch screen * Main power harness * Main engine harness * Injector harness * Other harnesses as required by the application * Oxygen sensor with fitting

4.0 out of 5 stars ( 1 )

$4,299.95

Holstein Parts Camshaft Sensors

The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.

3.0 out of 5 stars ( 2 )

$25.79

Page 1 of 1