Automotive Ignition & Electrical Supplies at Summit Racing

Powermaster Starter Inner Shims

Powermaster starter inner shims provide proper clearance and proper operation. These inner shims will help set the appropriate starter depth engagement between your pinion gear and flywheel. Take the time to shim your starter accurately. By utilizing Powermaster inner shims to assure the gear doesn't extend out too far, you'll prolong the performance life of both your ring gear and starter.

4.63 out of 5 stars ( 30 )

$9.99

—

$25.99

Haltech Firewall Grommets

Haltech offers a variety of data acquisition components and accessories for automotive performance and engine management applications. These firewall wiring grommets are molded from durable EPDM rubber and are available in different inside and outside diameters. They protect wires from sharp edges and abrasion when routed through the firewall to your gauge panel.

4.83 out of 5 stars ( 6 )

$16.00

Goodmark Battery Hold-Downs

Goodmark offers battery hold-downs in a variety of styles, such as J-bolt, clamp, and bolt-down. They're available in different materials and finishes. Ensure that your battery is properly secured; order the hold-down recommended for your vehicle.

3.22 out of 5 stars ( 9 )

$3.99

Taylor Spiro-Pro Spark Plug Wire Sets

Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.

4.63 out of 5 stars ( 670 )

$23.03

—

$160.32

Painless Performance 26-Circuit 1970-72 Direct-Fit Chevelle Harnesses

Painless Performance 26-circuit 1970-72 Direct-Fit Chevelle harnesses give you everything you need, plus more! Not only are there provisions for connecting standard factory components, they also offer what you need for aftermarket parts. Various pigtails and light sockets are provided, so the harnesses easily fit mismatched cars (1971-72 cars with 1970 front ends, or 1970 cars with 1971-72 rear bumpers). The gauge cluster pigtail allows for the square "full sweep dash" harness and includes a Super Sport cluster pigtail. This makes it easy for those with a full sweep dash to swap to an SS-style cluster at a later date by undoing only one connector and plugging in the separate pigtail. Additional details: * Harness follows the same routing as the factory harness—allowing you to use OE attachment points * Numerous components have the connectors and terminals pre-installed to make connections plug-n-play * All exterior lights have the correct sockets and bulbs pre-installed * Extra length is added to the headlight section to be routed behind the driver side inner fender for a cleaner look * 6-gauge charge wire and 100 amp MIDI fuse * Fully integrated ground circuit * Factory-style precision molded fuse block can easily be installed in the OE location * Updated ATC-style fuses ensure that the 26 circuits stay protected and safe * Backside of the fuse block has an OE-style bulkhead connector so no trimming or cutting of your firewall is required * Plug-and-play design makes the install easy, no matter your options * Included console harness can be easily added at any time * Each pre-terminated connector is tagged for easy routing and installation * 120+ page manual is full of color schematics, photos, and step-by-step instructions Notes: * Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring * The switch power wire for OE power window/locks and A/C are included * Also included is a blower motor harness for heat-only systems

4.8 out of 5 stars ( 10 )

$1,014.99

Summit Racing™ Race Series 50 Ohm 8.5mm Ignition Wires

Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.

4.34 out of 5 stars ( 207 )

$68.99

—

$94.99

Summit Racing™ Adjustable Battery Mounts

Summit Racing™ adjustable mounts will hang your batteries safely and securely. Our bolt-on steel mounts are lightweight, adaptable, and strong. They can be mounted to frame rails, inner fenders, or firewalls; or fastened to round tubing using clamp-on ballast brackets. Each mount includes a hold-down and hardware for the hold-down. Find the best location for your battery and install it with Summit Racing™ adjustable mounts.

4.58 out of 5 stars ( 52 )

$44.99

—

$57.99

Taylor 409 Race-Fit Pro Race Spark Plug Wires

Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.

4.59 out of 5 stars ( 158 )

$74.11

—

$185.58

E3 DiamondFIRE Heat-Sleeved Racing Ignition Wires

E3 DiamondFIRE heat-sleeved racing ignition wires boast a proprietary design that will help put you in victory lane. Featuring angled boots and full heat sleeving, these wires are engineered to work in concert with E3's patented DiamondFIRE spark plugs for maximum spark and more power. Order the wires recommended for your vehicle and engine application. Features include: * Class F40 spiral conductor * Rated at 40 ohms per foot * Impregnated with Ferrite, an iron alloy that improves magnetism * 8.5mm 100 percent silicone outer jacket encases a 100 percent silicone inner jacket with stainless steel locking terminals * Unique E3 design: Rock-solid, braided Aramid base core, and Carblex outer core—which make up part of the DiamondFIRE Tri-Core; nickel copper alloy conductors for exceptional spark energy transfer

4.14 out of 5 stars ( 14 )

$139.99

—

$149.99

Taylor Extreme Series Spiro-Pro Spark Plug Wire Sets

Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.

4.35 out of 5 stars ( 26 )

$154.27

—

$165.81

American Autowire Builder 19 Wiring Harness Kits

American Autowire Builder 19 wiring harness kits offer big power in a small panel! Great for tight wiring spots in your kit car, roadster, or truck, these Builder 19 wiring harnesses incorporate a slim fuse panel with mounting pads and an attached fuse panel cover with an inner label, identifying all circuits by description and fuse rating. And all high-output circuits incorporate superior spring steel-reinforced terminals, making the Builder Series second to none in durability and reliability. When you're down to the wire, the choice is easy--American Autowire! Builder 19 kits features: * Slim, compact, pre-wired ATO-style fuse panel * Headlight, dimmer, and ignition switches * Extra-long wire lengths for custom wire routing * Steering column connector and adapter * Full color schematics and instructions

5.0 out of 5 stars ( 2 )

$559.61

Edelbrock Max-Fire Ultra-Spark 50 Spark Plug Wire Sets

Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.

4.58 out of 5 stars ( 53 )

$57.95

—

$106.95

Painless Performance 26-Circuit 1969 Direct-Fit Chevelle Harnesses

Painless Performance 26-circuit 1969 direct-fit Chevelle harnesses deliver everything you need, plus more! These kits offer provisions for connecting standard factory components, as well as what you'll need for aftermarket components. This includes options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. The 26-circuit harnesses follow all of the same routing found on the factory harnesses, which allows you to utilize the factory attachment points—and extra length has been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. True to their name, Painless Performance supplies what you need for a trouble-free, headache-free wiring job. The 26-circuit 1969 Chevelle harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * Fully integrated ground circuit * 120+ page manual full of color schematics, photos, and step-by-step instructions

5.0 out of 5 stars ( 7 )

$961.99

Summit Racing™ Ford Mod Motor Coil-On-Plug Ignition Coils

Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.

4.65 out of 5 stars ( 62 )

$18.99

—

$335.92

PerTronix Flame-Thrower 7mm Stock Look Spark Plug Wire Sets

PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility

4.13 out of 5 stars ( 141 )

$66.21

—

$79.55

Summit Racing™ Muscle Car Retro Ignition Wires

Summit Racing™ muscle car retro ignition wires offer an old-school look without sacrificing modern-day features. These 7mm wires have a low 300 ohm/ft. resistance and aramid inner core wrapped by a spiral-wound conductor for full spark delivery and excellent EMI suppression. A dielectric barrier prevents current leakage, and a braided fiberglass layer strengthens the wires, while maintaining flexibility. A crimp tool is included. The ignition wires are available with straight or angled spark plug boot ends and other options. Order the set designed for your classic 1960s or '70s application.

4.5 out of 5 stars ( 10 )

$53.99

—

$68.99

Taylor 409 Pro Race Universal Spark Plug Wire Sets

409 Pro Wire sets start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor even bonds pure silicone boots directly to the wires. The results are wires that have a 100,000 V plus dielectric strength rating that gets more spark to your plugs.

4.47 out of 5 stars ( 30 )

$146.04

—

$197.06

PerTronix Flame-Thrower Spark Plug Wire Sets

Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy

4.42 out of 5 stars ( 121 )

$50.70

—

$150.95

Taylor Spiro-Pro Universal Spark Plug Wire Sets

Outshine the competition in both looks and performance with Taylor Spiro-Pro universal spark plug wire sets. Order the model that's compatible with your engine application. Features include: * 100 percent silicone inner core and outer jacket * Spiro-wound core consists of highly conductive resistor conductor spiral with stainless steel wire, covered with a fluorocarbon conductive material * More firepower to the spark plugs than OEM resistor core wires, and up to 10 times less resistance than standard resistor core wires * Eliminate radio frequency interference (RFI) * Highest temperature-rated wire on the market (600 degrees F) without the need for additional sleeving * Taylor's exclusive low-profile, vibration-proof, 100 percent silicone Pro Boot with grips * Double spring-locking spark plug terminals * Choice of many vibrant colors

1.0 out of 5 stars ( 2 )

$25.77

—

$97.70

Heatshield Products Pro-Boot Heat Shields

Pro-Boot Shields by Heatshield Products are designed to have a professional look after installation. These innovative spark plug boot protectors are little longer than their original Insul-Boots and engineered for today's DIS ignition systems. Composed of the lava rock-based basalt fiber, they are designed to be 25 percent stronger than their fiberglass predecessors! The Lava fiber also offers some abrasion resistance, and is chemical, oil, and acid-resistant. Additional features include the inner Tac Armor Liner that provides an extra layer of heat insulation for the ultimate spark plug heat shield. These protectors also include a patented hook-and-loop fastener on the spark plug boot cover's wire end that keeps heat, dirt, and debris away from the boot. Enjoy an easy installation and professional look with Heatshield Products Pro-Boot spark plug heat shields!

4.0 out of 5 stars ( 5 )

$47.99

—

$315.99

Allstar Performance Primary Electrical Wire

Allstar Performance primary electrical wire features a single stranded copper inner with polyvinyl insulation which remains flexible and is abrasion resistant. The wire is available in 10, 12, 14, or 20-gauge sizes and come in different length spools to suit your wiring needs.

4.67 out of 5 stars ( 6 )

$6.99

—

$49.99

Summit Racing™ Street Series 500 Ohm 8mm Ignition Wires

"Summit Street Series" 8mm ignition wire sets give you an all-around high quality constructed wire set and custom fit. Our street proven wire sets offer a high heat black silicone outer jacket and high dielectric strength inner jacket bonded together with fiberglass matting to provide you with the ultimate in a street series wire set. The 8mm construction protects the 500ohm per foot Mag wire-wound RFI suppression core from the thermal heat breakdown, associated with the extreme heat from the street. The use of fiberglass matting construction means you get industry leading terminal resistance pull off values to keep your connections strong. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery. High heat-resistant black silicone spark plug boots provide the cover you need for superior radiant heat resistance and high dielectric strength. With all of these features built into our "Summit Street Series" custom 8mm sets, you can be assured that installing one of our wire sets will give you the confidence and reliability to keep your ride running at its peak performance.

5.0 out of 5 stars ( 1 )

$49.99

NOCO NCP2 Battery Terminal Protectors

NOCO NCP2 battery terminal protectors provide a barrier against acid fumes that seep through improperly sealed batteries and cause battery corrosion. They are made from 100 percent organic, non-woven felt saturated in NCP2—an oil-based corrosion preventative compound that will not dry out or evaporate. Corrosive build-up on battery terminals can degrade connection over time, resulting in power dampening or even power loss. Prevent these problems by adding a layer of insurance—NOCO NCP2 battery terminal protectors. Features and benefits: * Designed with removable perforated inner ring for a one-size-fits-all fix * Eliminates battery corrosion for increased cranking ability * Suitable for top and side post batteries * Stops battery corrosion for the life of your battery

5.0 out of 5 stars ( 2 )

$3.99

—

$19.99

PerTronix Dual Wall Heat Shrink Tube Kits

PerTronix dual wall heat shrink tube kits contain waterproof sleeves in a variety of lengths, diameters, and colors. Their adhesive-lined inner wall seals and protects against moisture and corrosion. The polyolefin tubing is easy to shrink with a heat gun. Add a layer of insulation and protection for your wiring connections and other components. Additional product details: * Temperature rated at -49 degrees to 257 degrees F * Shrink temperature: Start at 158 degrees F; completely shrunk at 248 degrees F * Shrink ratio 3:1 * Max electrical rating: 600 V

Not Yet Reviewed

$34.78