Ignitions & Electrical
Availability
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock and ready to ship.
Showing In Stock Items. Show All 62 Items.
American Autowire HEI distributor ignition connectors are used to connect custom wiring harnesses to GM HEI distributors. They include the connector housing and a female terminal. Whether you are working on a totally stock restoration, a resto-mod, or a completely custom street rod—American Autowire has a solution for your vehicle.
( 7 )
$5.70
Allstar Performance HEI tachometer connectors are the proper replacements to use when repairing or wiring the tach side of your HEI systems. They have built-in retaining clips, the same as originals, for secure connection. The included pigtail wires are also the correct gauge for easy installation.
( 3 )
$5.99
ACCEL HEI power pigtails clean up your engine bay. For GM HEI coil-in-cap, these connectors eliminate the use of single spade connectors that are prone to falling off and killing your ignition. ACCEL pigtails with high-temperature connectors offer a positive fit with a locking tab and shark fin to ensure that the connection between your wiring and HEI stays intact. They house two 10 in. lead wires, one bright red for your 12 V key-switched wire, and the other green for your tachometer.
( 145 )
$19.50
Chevrolet Performance HEI (high-energy ignition) power pigtails get you properly connected to your distributor. From your tachometer and power supply to your fire stick, these are genuine HEI wiring connections for universal applications.
( 5 )
$59.83
Intellitronix HEI pigtails will get power from your ignition to your HEI distributor on a GM HEI. They come with a wire lead, and plug into the OEM distributor cap. They're perfect for replacing worn or damaged connectors. For power, tach, or combination, order the pigtail needed for your application.
( 2 )
$7.66
—
$12.07
High-energy ignition (HEI) distributors have become one of the most popular styles available. The aftermarket modified GM's original design, making them available for the Big Three and some other applications, too. Allstar Performance HEI power pigtails are used when repairing or wiring the HEI into the ignition system. The single-wire connectivity is one of the reasons for the distributor's popularity. These wires include a built-in retaining clip for attachment to the ignition cap and the correct gauge wire for installation. HEI distributors have an all-in-one configuration, 50,000 V coil, and one-wire hookup. Get your unit running at peak efficiency with Allstar HEI power pigtails.
( 8 )
$5.99
Hook up your GM HEI distributor and tachometer the pain-free way with Painless Performance pigtails. These replacements easily connect to your distributor and splice into your tach power supply. An OEM distributor connector with 6 ft. of wire is included in the packages to complete the job. Go trouble-free with Painless Performance HEI tachometer lead pigtails.
( 16 )
$9.99
Painless Performance HEI power pigtails will get power from your ignition to your HEI distributor on a GM HEI. They come with an 8 in. lead, and plug into the OEM distributor cap. These pigtails are perfect for replacing worn or damaged connectors.
( 7 )
$6.99
Keep It Clean HEI power pigtails will get power from your high-energy ignition to your HEI distributor. They come with an 8 in. lead and plug into the OEM distributor cap. These harnesses are perfect for replacing worn or damaged connectors. Order the model that best suits your application.
( 7 )
$18.95
Summit Racing™ HEI Power Pigtails will get power from your ignition to your HEI distributor on a GM HEI. They come with a wire lead, and plug into the OEM distributor cap. They're perfect for replacing worn or damaged connectors.
( 77 )
$6.99
—
$11.99
BluePrint Engines HEI power and tachometer pigtails will help make wiring connections easier. These one-piece distributor harnesses have color-coded wires to quickly identify the battery and tachometer wire. Select one for use with your GM-style big cap HEI distributor.
Not Yet Reviewed
$14.95
Create connections for your ride with American Autowire connector housings. These wiring replacements are available in styles and sizes for different applications, and terminals are included. Connect your alternator, HEI tach, dimmer switch, and more with help from American Autowire.
( 7 )
$5.70
—
$10.45
Pico connector pigtails can help to eliminate the unnecessary cutting and splicing of wires. They're available in a variety of styles, designs, and configurations to fit many electric-related harnesses on the engine, lighting, electrical, or ignition systems. No more messy connections or wires running all over the place—Pico wiring pigtails provide easy, clean replacements for your damaged or faulty OEM connectors.
( 156 )
$5.99
—
$76.99
Davis Unified Ignition battery and tachometer connectors make your power supply connection and tachometer connection to a D.U.I. distributor simple! These plastic insulators with brass terminals plug directly into the cap and coil assembly and the locking tabs prevent lost connections due to vibration. Sold individually, one of each is required for both hot wire and tach hookup.
( 20 )
$7.50
Wire up your HEI distributor with a one-piece power and tachometer cable set from Top Street Performance. These harness pigtails provide a Top Speed or GM high-energy ignition with 12 V power and tach. They're available in different pins-per-connector and finishes.
( 3 )
$4.14
—
$8.22
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
Davis Unified Ignition HEI distributor terminal board wiring harnesses are the perfect-fit replacements for your D.U.I. high-energy ignition distributor. The harnesses are assembled with terminal block, wires, connectors, and radio capacitor.
( 1 )
$23.50
Granatelli Ford Coil-On-Plug connector kits utilize an exclusive solid stainless connector cable with stainless snap lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near "0" ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. These kits are engineered to exceed OEM specifications and to be OBD-II computer safe. Available with or without new coil packs.
( 3 )
$191.67
—
$625.28
These XFI ignition adapter harnesses and connector kits are used with the XFI units that have the latest in flash microprocessor technology to deliver a significant increase in processing speed. They are able to process, analyze, and adjust four times faster than previous EFI systems. These kits enable you to keep your software current without ever removing the XFI from your vehicle.
( 1 )
$47.01
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$77.15
—
$79.09
On Sale
MSD has the replacement distributor parts that you need. Don't replace a worn or broken part with another substandard piece. MSD is on the leading edge of production and design and they have one of the strongest reputations in the industry. Look to MSD for reliability, consistency, and the quality products that your ride deserves.
( 22 )
$21.05
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 92 )
$499.95
—
$632.95
MSD recognized the need for a true marine performance distributor and built these Pro-Billet marine distributors to answer this need. Marine environments place rigorous demands on every component of the ignition system, especially the distributor. The combination of water spray, salt exposure, full throttle acceleration, and harsh vibrations all take their toll. The housing is CNC-machined from billet 6061-T6 aluminum, creating a housing with no porosity or weak areas. Internally, a Tuftride coated steel shaft is guided by a sealed ball bearing and an extra-long sintered bushing for high-speed stability and endurance. Each distributor uses MSD's race-proven magnetic pickup to trigger the ignition control. The pickup receives its signal through a precision-manufactured reluctor that is attached to the shaft. The mechanical advance assembly receives a QPQ plating for long lasting resistance to corrosion in marine environments. Their mechanical advance assembly is easily adjustable, so you can dial-in an ignition curve to match your boat's application. Three additional sets of advance springs and stop bushings are included with detailed instructions, making adjustments easy to perform and understand. The distributor cap is bolted and sealed to the aluminum base, and has two flame arrestor holes with brass screens machined into the base of the distributor. This design works to prevent ignition of gas fumes that may build up in the engine compartment. A special weathertight connector is supplied to provide a positive lock and water-resistant connection. This heavy-duty connector will withstand high temperatures and water, and plugs directly into the MSD 6M-2 or 7M-2 ignitions. The distributors come complete with a high-quality, bolt-down alkyd cap and MSD's racing rotor. These high-quality distributors have been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard. They require the use of a separate ignition box.
( 4 )
$549.95
—
$632.95
Clearance
ACES High Roller Pro ignition packages are complete ignition systems offering the latest technology, strongest spark, and precision performance. All kits include: * Black Jack Pro billet distributor * Black Jack Pro ignition coil * High Roller Pro CDI ignition box with handheld touch screen controller, mounting hardware, and connectors * Black Jack Pro ceramic boot spark plug wires
Not Yet Reviewed
$799.99
$479.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
