Automotive Ignition & Electrical Supplies at Summit Racing

On Sale

Range Technology AFM/DFM Disabler Devices

All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options

4.76 out of 5 stars ( 72 )

$265.95

$239.35

Rough Country Speedometer Calibrators

Your vehicles computer is designed to track the speed based on your stock tire height. When upgrading to larger tires, there will be a discrepancy between your actual speed and the readout on your speedometer. Rough Country speedometer calibration devices are easy to use to help you quickly reprogram your vehicles speedometer to match the output of your larger tires. These plug-and-play devices connect directly to your vehicle's diagnostic link connector port and in just a few short minutes your speedometer reads true again. Plus, they not only change your in-dash readout, but they also update your vehicles ECM, ensuring accurate shift points and proper electronic stability control. Finally, you can get an affordable and accurate speedometer calibration with an easy and intuitive setup process, thanks to Rough Country. Choose the device designed for your vehicle.

Not Yet Reviewed

$39.95

—

$259.95

On Sale

DiabloSport AFM Disabler Devices

DiabloSport AFM disabler devices allow for maximum power and vehicle performance by disabling the factory Active Fuel Management (AFM) feature that drops cylinders and reduces power. They are compatible with GM vehicles built from 2005 to current that have AFM. With an easy installation--just plug them into the OBDII port under the dash and drive--you can eliminate hesitation on acceleration and the annoying exhaust buzz caused by AFM activation. You can stay in V8 mode at all times without reprogramming or re-flashing the vehicle's onboard computer (ECU).

4.75 out of 5 stars ( 59 )

$255.95

$230.35

On Sale

Range Technology Auto Stop/Start Disabler Devices

Range Technology Auto Stop/Start disabler devices end the annoying engine stop and restart at lights. And they are fast and easy to setup. Simply plug the disabler into your onboard OBD-II port and it instantly begins working to eliminate the Auto Start/Stop system. Benefits and features of Range Auto Stop/Start disablers: * No special tools needed to install or remove/uninstall * Patented technology will disable Start/Stop without reprogramming your ECU * No more hesitation when restarting after stopping in traffic * Saves on costly repair bills in the future by turning off Start/Stop * Safe and reversible to use; leaves no trace--unplug it to return to factory settings

4.54 out of 5 stars ( 26 )

$210.95

—

$255.95

$189.85

—

$230.35

REDARC Encapsulated Protection Devices

REDARC encapsulated protection devices are 7 amp diodes suitable for 12 and 24 V applications. It is totally encapsulated, with sealed connections and will work in ambient temperatures up to 85 degree C (185 degrees F). It has been designed to fit in the trailer stop lamp feed to support the installation of Tow-Pro brake controllers on vehicles where back feed of 12 V during Tow-Pro manual override may interfere with the vehicle systems.

Not Yet Reviewed

$60.00

JMS Chip TractionMAX Traction Control Devices

"Don't overpower your tires", JMS Chip TractionMAX traction control devices optimize acceleration and traction. Designed to work with big horsepower, traction-limited vehicles, TractionMAX installs in minutes, is rugged and waterproof, and adjustable on-the-fly. Each JMS kit includes TactionMAX device, plug-and-play wiring harness, remote adjustment knobs, installation kit, accessories, and installation instructions. Choose the kit designed to support your vehicle. Features and benefits: * Plug-and-play installation * Enhance low and mid-range horsepower torque and acceleration * Reduce turbo lag eliminate stalling on manual gearbox vehicles * Can be stacked with other tuning products to maximize performance * Remote dual adjustment knobs dial-in your exact throttle and traction settings (adjust the feel of your pedal and the amount of available traction) * Factory and aftermarket tuning compatible * Unplugged dial saves the position of both control dials

Not Yet Reviewed

$449.75

Holley EFI CAN Adapter Harnesses

Holley EFI CAN adapter harnesses are available in several options. Offered are male to female harnesses in several lengths for Racepak and other external CAN devices, harnesses that adapt 2-pin Holley main harness CAN connectors to newer 4-pin CAN devices, and kits that directly connect Racepak Vnet/Holley to either the J1A (HP and Dominator ECUs) or J3 (Dominator ECU only) connectors. Create secure connections with genuine Holley EFI CAN adapter harnesses.

Not Yet Reviewed

$67.49

—

$94.49

Banks Power PedalMonster Throttle Response Enhancers

Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal

4.64 out of 5 stars ( 39 )

$313.32

—

$315.93

JMS Chip PedalMAX Terrain Drive by Wire Boosters

JMS Chip PedalMAX Terrain drive-by-wire boosters are very similar to the standard PedalMAX series but have two added features: They have the ability to reduce or increase the throttle sensitivity (reduction feature works great for inexperienced drivers or for poor traction conditions); and they can save your knob setting--just unplug the knob and it's saved! Now you can match your throttle response to your exact terrain with JMS Chip PedalMAX Terrain drive-by-wire boosters. Order the model recommended for your vehicle.

5.0 out of 5 stars ( 1 )

$309.75

JMS Chip PedalMAX Drive-by-Wire Boosters

JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.

4.82 out of 5 stars ( 56 )

$210.99

—

$289.75

HP Tuners VCM Suite MPVI4 Credit Pro Packages

HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender

4.33 out of 5 stars ( 6 )

$399.99

—

$799.91

HP Tuners GM E90/T93 Upgrade Kits

Take full control of your truck's performance with HP Tuners GM E90/T93 upgrade kits! Designed for 2019-2022 GM vehicles equipped with the E90 ECM (engine control module) and T93 TCM (transmission control module), the E90/T93 ECM upgrade kits from HP Tuners can empower DIY enthusiasts and professional tuners to perform the ECM upgrade on compatible GM vehicles right at home or in the shop. The key advantage to these upgrade kits is there's no need to remove the ECM from the vehicle, which eliminates the risk of damaging delicate components during removal and reinstallation. These GM E90/T93 upgrade kits by HP Tuners also eliminate the need for complex reprogramming or relearns. Vehicle compatibility: -- The GM E90/T93 Upgrade Kit is designed for GM vehicles equipped with the E90 ECM and/or T93 TCM GM E90 ECM Support: -- 2019-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L and 6.2L V8 – L84/L87) -- Pre-facelift models (non-Global B) GM T93 TCM Support: -- Various 2019+ GM vehicles equipped with 8-speed and 10-speed transmissions (non-Global B), including: 2020+ Chevrolet Camaro, 2019-2022 Chevrolet Silverado 1500/GMC Sierra 1500 (5.3L, 6.2L Gas, 3.0L Duramax) and 2020-2023 Chevrolet Silverado 2500HD/3500HD (6.6L L5P) What's included in the kit: -- HPTNet cable – GM E90 ECM -- HPTNet Cable – GM T93 TCM -- Upgrade box -- Upgrade cable Additional required products: -- MPVI3 device (with its supplied USB A to C cable) -- Latest version of HP Tuners VCM Suite (BETA) -- Once you're ready to write your new tune file, you must first license the vehicle Important Notes: Please refer to detailed instructions carefully so you can successfully perform the upgrade. This kit is NOT compatible with MPVI, MPVI2, or MPVI2+ devices. Only MPVI3 devices work with this kit. An E90 ECM/T93 TCM upgrade is required for tuning in VCM Editor. HP Tuners' existing E90 ECM / T93 TCM services are still available: GM T93 TCM Services and GM E90 ECM Services. No reprogramming or relearns are required using this kit. After upgrading, each GM E90 ECM must be licensed for (6) Universal Credits and each GM T93 TCM must be licensed for (4) Universal Credits. Credits are not included in this kit and must be purchased separately.

3.0 out of 5 stars ( 2 )

$399.99

On Sale

Range Technology DFM Modules

Range Technology DFM modules are designed for late model GM refresh trucks and SUV's. This innovative device is the first in the market to provide a solution for disabling the dynamic fuel management system in these vehicles. By installing the DFM Module, users can effectively override the vehicle's built-in cylinder management system, allowing the engine to run on all cylinders, all the time! This leads to a better driving experience, and better long term engine reliability. This device is a true dual threat eliminating the most frustrating features your brand new truck or SUV's came equipped with, DFM and engine auto start/stop. By simply plugging this device on to your ECM, both systems will remain inactive at all times, leaving you with the peace of mind your engine will run more consistently without issues or interruption. Just hop in and drive without the worry of cylinders cutting off leaving you powerless or the engine shutting off at every stop sign, creating a hesitation on take-off or killing power to your in-cabin luxuries like A/C and rear entertainment systems. Features: * Disables dynamic fuel management (DFM) and engine auto start/stop systems * Smart inline technology integrates seamlessly with the ECM * Allows a true 'return to stock' status when removed with no trace for worry free dealer services * All-time V8 mode means better power on demand, a more consistent driving experience, reduced engine and valvetrain wear, and improved long term engine reliability * Enjoy that V8 rumble and avoid unpleasant exhaust notes and drone from running in cylinder deactivation mode * Plug-and-play installation can be completed in minutes * Some applications may still encounter 0-Cylinder Mode while coasting when 0% throttle input is detected at the ECM * 49-State Emissions Compliant * Made in USA

5.0 out of 5 stars ( 18 )

$249.95

—

$511.95

$224.95

—

$459.95

MSD High-Current Solid State Relay Blocks

MSD high-current solid state relay blocks take the place of four standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 amps of continuous current, providing up to 140 amps of power, and also has the capability of pulse width modulation. The blocks can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90 degrees to accommodate various mounting locations. Clean up your wiring with MSD high-current solid state relay blocks. Features include: * Operates from 7 V to 20 V supply * Four independent channels, 35 amps each continuous or 100 amps for 8 seconds * Combined total continuous current rating of 140 amps * Channels can be run in parallel for devices requiring more than 35 amp single-channel rating * Over-temperature, short circuit, and overload protection * Diagnostic LEDs and status indicators * Multiple mounting options * Single wire activation by switching power or ground * Available in red or black * PWM signal can be used--maximum frequency of 150 Hz and a duty cycle range from 50 to 90 percent

4.33 out of 5 stars ( 18 )

$222.95

NOS Solid State Relays

NOS solid-state relays address the need for reliable, rugged, and affordable control of various electrical equipment on your race car. Originally designed to control the high-current switching loads of nitrous solenoids, these relays can also be used to control other high-current devices—such as electric water pumps, trans-brakes, and line locks. NOS relays feature an ultra-low activation/release time of less than 16 microseconds to ensure no delays in reaction times. The solid-state relays can also be Pulse Width Modulated (PWM) with no minimum-duty cycle at frequencies up to 1000hz. NOS solid state relays feature: * 5-20 V DC operation * Rugged solid-state circuitry * Easy 3-wire connection * Included terminated pigtail * Included extra contacts for build-your-own wiring * Ultra-fast activation, under 16 microseconds * Pulse Width Modulation (PWM) compatible * PWM 0-100 percent * Up to 1000hz frequency * Vibration-resistant * Maximum continuous current = 40 amps * Maximum switching current = 20 amps

5.0 out of 5 stars ( 14 )

$94.75

HP Tuners ECM Upgrade Kits

HP Tuners ECM Upgrade Kits will give do-it-yourself enthusiasts and professional tuners a convenient option to perform the ECM upgrade on their 2017+ Chevy Silverado/GMC Sierra 6.6L Duramax in their own garage/shop. The best part? There's no need to remove the ECM from the truck. This means there's no risk of breaking tabs during the removal or reinstallation process, and the kit doesn't require any reprogramming or relearns. From start to finish, you can upgrade your E41 ECM in roughly 20 minutes—all you need is this upgrade kit, your MPVI2+ with Pro Feature Set or MPVI3 device with its supplied USB A to C cable, and a VCM Suite-compliant computer with the latest version of VCM Suite BETA. Once the ECM is upgraded, you'll experience the industry's most comprehensive diagnostics and tuning package using VCM Suite with full scan, data log, read, edit, and write capabilities. Plus, you'll experience the quickest write times in the industry in approximately 6 minutes! Product features and benefits: * No IMMO relearn * No crank relearn * No need to perform "Replace ECM" function

1.0 out of 5 stars ( 1 )

$199.99

Spal Electric Fan Relay Wiring Kits

These Spal electric fan relay wiring kits are designed to automatically turn on your Spal electric fan when the air conditioning is turned on. They can also be used when dual electric fans are installed using one switching device.

4.7 out of 5 stars ( 37 )

$62.23

Holley EFI CAN Input/Output Modules Kits

The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz

4.0 out of 5 stars ( 3 )

$499.95

On Sale

DiabloSport inTune 3 GM E90/T93 Unlock Kits

The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 8225-R kit includes an industry-leading inTune 3 handheld tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the inTune 3 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. Get power you can feel—with DiabloSport! DiabloSport inTune 3 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck!

3.67 out of 5 stars ( 3 )

$870.95

$782.95

Garmin Catalyst 2 Driving Performance Optimizer

Achieve faster, more consistent lap times with the Garmin Catalyst 2 Driving Performance Optimizer. This all in one real time coaching and analysis system designed to refine your driving technique through precise data, HD video, and actionable feedback. The compact device mounts easily, records your sessions, and delivers insights that help you understand exactly where to improve. Garmin Catalyst 2 Driving Performance Optimizer features: * Real Time Audio Coaching: Provides adaptive audio cues through Bluetooth connected earbuds or car stereo so you can adjust driving technique instantly. * Integrated HD Camera: Built in 1440p HDR camera records high clarity video of every session, with a polarized lens cover to reduce glare. * Graphic overlays on your HD videos including track map, speed, delta time, G-G traction circle diagram and more. * Patented True Optimal Lap Technology: Combines your best repeatable sector times into a composite lap video to show what's truly achievable. * Advanced Position Tracking: Uses 25 Hz multi GNSS, accelerometers, gyroscopes, and image processing for precise line mapping and vehicle dynamics. * 3" Touchscreen Display: Shows real time lap data including last lap, best lap, adaptive delta time, lap count, and session time. * Drag Racing Timer: Records acceleration milestones, including 0–60 mph and common drag distances. * Preinstalled Track Database: Comes loaded with road courses worldwide and supports custom track creation.

Not Yet Reviewed

$1,199.99

Bully Dog GT Platinum Tuners

Bully Dog GT Platinum tuners are four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device. They dramatically improve the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions. Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.

3.58 out of 5 stars ( 66 )

$399.00

MSD Ultra 7AL Ignition Boxes

For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.

3.0 out of 5 stars ( 2 )

$819.95

DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems

DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting

4.67 out of 5 stars ( 3 )

$869.99

On Sale

DiabloSport inTune i3 Computer Programmers

DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Order the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity

4.32 out of 5 stars ( 28 )

$475.95

—

$511.95

$427.95

—

$459.95