Automotive Ignition & Electrical Supplies at Summit Racing

E3 DiamondFIRE Heat-Sleeved Racing Ignition Wires

E3 DiamondFIRE heat-sleeved racing ignition wires boast a proprietary design that will help put you in victory lane. Featuring angled boots and full heat sleeving, these wires are engineered to work in concert with E3's patented DiamondFIRE spark plugs for maximum spark and more power. Order the wires recommended for your vehicle and engine application. Features include: * Class F40 spiral conductor * Rated at 40 ohms per foot * Impregnated with Ferrite, an iron alloy that improves magnetism * 8.5mm 100 percent silicone outer jacket encases a 100 percent silicone inner jacket with stainless steel locking terminals * Unique E3 design: Rock-solid, braided Aramid base core, and Carblex outer core—which make up part of the DiamondFIRE Tri-Core; nickel copper alloy conductors for exceptional spark energy transfer

4.14 out of 5 stars ( 14 )

$144.99

—

$149.99

Taylor Extreme Series Spiro-Pro Spark Plug Wire Sets

Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.

4.35 out of 5 stars ( 26 )

$154.90

—

$160.20

On Sale

Summit Racing™ Reproduction Wiring Harnesses

Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.

4.44 out of 5 stars ( 59 )

$905.99

$15.99

—

$848.99

American Autowire Factory-Fit Wiring Harnesses

American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.

4.61 out of 5 stars ( 28 )

$16.15

—

$709.65

Drag Race Solutions Ignition Coil Mounting Brackets

Drag Race Solutions ignition coil mounting brackets feature CNC billet aluminum construction available with a satin black powdercoat or triple chrome plate finish. They come with stainless steel mounting bolts and aluminum spacers to mount brackets directly to a Big Block Chevy cylinder head. Drag Race Solutions ignition coil mounting brackets fit MSD Pro Power, HVC, and HVC II coils.

Not Yet Reviewed

$99.99

—

$119.99

On Sale

Racepak V-Net EGT Sensor Kits

Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)

Not Yet Reviewed

$1,024.95

—

$1,649.95

Summit Bucks

Full Spectrum Power P.Motive Batteries

Full Spectrum Power P.Motive Lithium Batteries are the strongest, lightest, and most powerful automotive lithium batteries ever created. Engineered to exceed the toughest demands of today's race cars and trucks. Whether you're powering a 5,000hp twin-turbocharged pro mod, a methanol-sipping turbo LS, or a 2JZ-powered X-275 car, we've got the perfect solution for you. For bracket racers seeking a reliable battery for your N/A big-block Chevy-powered dragster, we've got you covered too. P.Motive batteries offer unparalleled power to turn your engine faster than any other lithium battery on the market. Designed for extreme performance, these batteries deliver more capacity, ensuring that you always have the reserve power needed to cross the finish line when it matters most. Key Features: *Advanced Case Design: Stronger, lighter, and more resilient than ever before, with heat, vibration, gas, and oil rejection. *Optimized Cell Design: Built specifically for motorsports with a decade of engineering expertise behind every cell. *Universal Charger Compatibility: Works seamlessly with most commercially available chargers. *V Direct Multi-Terminal: Our solid copper terminals feature 8 threaded mount holes for easy and secure accessory connections. *V Sleeve Silicon Terminal Covers: Color-coded for polarity, these covers provide added protection against short circuits.

Not Yet Reviewed

$1,049.00

—

$1,499.00

Allstar Performance Ready-to-Run Distributors

Allstar Performance ready-to-run distributors deliver point-style size and vacuum advance with electronic ignition technology. They're perfect for early GM cars without clearance for an HEI. The distributor housings are made of CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at higher rpm. Allstar ready-to-run distributors can use any external stock or performance coil, and they fit small and big block Chevys (except 348 and 409). Distributors include: * Vacuum advance lockout * 3-pin wire harness * Advance springs * Advance stop bushings * Manifold gasket * O-rings * Spark plug wire retainer cap with screws * Instructions

5.0 out of 5 stars ( 1 )

$271.99

Holley Chevy Camshaft Sync Kits

A cam sync signal is required to run sequential fuel injection, and Holley camshaft sync kits are ready to set the firing order for top performance. Available in a choice of kits for standard cam height small block and big block Chevys, as well as raised cam height big blocks, these Holley kits fit Jesel and other external, dry timing belt cam drive systems. They provide a plug-and-play cam position signal to Holley EFI systems, but are also compatible with any EFI system which can read a digital, square-wave cam input signal. All of the kits feature unique T-nut and bracket designs that allow for complete sensor adjustment from the outside of the bracket with a single jam nut. Let your ECU know which cylinder is number one in the firing order with a signal from Holley Chevy camshaft sync kits. Holley kits include: * 3-wire H all-effect sensor (8 to 20 V) * Anodized billet aluminum bracket * Mounting hardware * Mating connector * Stainless steel 1/4 in.-20 "flying magnet" screw with a high-temperature, rare-earth magnet

Not Yet Reviewed

$357.95

—

$377.95

Eddie Motorsports LS Ignition Coil Covers

Dress up your LS engine and hide the stock coils with a set of these Eddie Motorsports LS ignition coil covers. Designed to look similar to a Big Block Chevy valve cover, these components mount to the factory coil brackets and come complete with a billet aluminum oil filter extension, screw-in cap, and all of the necessary fasteners. Coil covers are 3.625 in. tall x 19.625 in. long and will fit 4.8L, 5.3L, 6.0L and 6.2L LS engines. They are available in multiple finishes.

2.0 out of 5 stars ( 2 )

$235.00

Allstar Performance High Performance Distributors

Timing is key in a well-running car, and Allstar Performance high performance distributors can help keep you on target. They have an upper support bearing to provide you with accurate timing at higher rpm. Manufactured from 6061-T6 aluminum and CNC-machined, these housings are built to handle high-rpm stress and remain looking good, too. Designed for use with an aftermarket control box and an external coil, Allstar high performance distributors fit small and big block Chevys and Fords. Allstar high performance distributors will help keep your timing true. Distributors include: * Advance springs * Advance stop bushings * Manifold gasket * O-rings * Spark plug wire retainer cap with screws * Instructions for a no-hassle install

Not Yet Reviewed

$196.99

—

$254.99

Holley Hilborn Universal Terminator X MPFI Systems

The Hilborn EFI-R manifold systems combine electronic fuel injection with the racing-born performance and aggressive looks of individual runner engine induction. Holley Hilborn Universal Terminator X MPFI systems provide cutting edge EFI technology, and are intended for the most serious naturally aspirated performance enthusiast. Each kit includes a CAN-USB tuning dongle, so you can tune your EFI system specifically for your engine via Holley's free Terminator X EFI software. Also included is a universal main harness, EV1 injector harness, Bosch LSU 4.9 wideband, input/output harness, and main power harness. These kits are for use with Hilborn EFI-R intake manifolds: * 300-800 for Big Block Chevrolet applications requiring 2 7/16 in. throttle bores * 300-801 for Big Block Chevrolet applications requiring 2 5/8 in. throttle bores * 300-807 for Big Block Chevrolet applications requiring 3 in. throttle bores

Not Yet Reviewed

$1,299.95

On Sale

Summit Racing™ 88 Series 50 Ohm 8.5mm Ignition Wires

Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.

4.34 out of 5 stars ( 200 )

$84.99

—

$92.99

$76.49

—

$83.69

Moroso Ultra 40 Race Ignition Wire Sets

Moroso new Ultra 40 Race ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Features of these 8.65mm wires include a Kevlar® core that's four times stronger than Aramid cores, a class-leading 40 ohms of resistance per foot, nickel copper alloy conductors for superior spark energy transfer, an extra-thick EPDM layer for greater dielectric strength, high-temperature silicone boots that can withstand heat up to 600 degrees, and locking stainless steel plug terminals. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection, and their extra-thick diameter extends wire life by adding additional insulation against heat, chaffing, and contaminants.

4.73 out of 5 stars ( 135 )

$233.99

—

$294.99

Moroso Ultra Ignition Wire Sets

Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.

4.26 out of 5 stars ( 65 )

$45.16

—

$162.99

On Sale

Summit Racing™ 86 Series 8mm 300 Ohm Ignition Wires

With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! - Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business - Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery - Ultra-high heat silicone spark plug boots provide superior radiant heat protection - High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.

4.51 out of 5 stars ( 1023 )

$43.99

—

$62.99

$39.59

—

$56.69

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.65 out of 5 stars ( 1987 )

$120.95

—

$282.95

Powermaster Drag Race Alternator Kits

Solve low amperage problems with easy-to-install Powermaster Drag Race alternator kits. They include a one-wire lightweight racing alternator, a hard-coated deep-groove alternator and crank pulley, bracket kit, and a belt. The black, high-heat transfer coating reduces alternator temperatures by 50 degrees F or more, thus prolonging their life and enhancing efficiency. Powermaster dyno-tests each alternator under various loads at variable speeds, and attached a tag with the performance data to each case. They come in your choice of low-mount kits for rail cars, or snug-mount kits for body cars.

4.27 out of 5 stars ( 22 )

$338.99

—

$783.99

Optima Yellow Top H6 Batteries

From the company that brought you the revered Red Top battery comes the new Optima Yellow Top H6 batteries. Designed to fit a wide range of vehicles with one part number, these batteries are the revolution for battery products. With Optima's tried and true AGM cells, the Yellow Top H6 battery will be the one to beat for years to come. Key features: * Deep-cycle and cranking power * Up to 3 times longer life * 15 times more vibration-resistant * Virtually spill proof * Mountable in virtually any position * Maintenance-free * Faster recharging * Optimal starting power * 300+ discharge/recharge cycles

4.76 out of 5 stars ( 45 )

$369.99

Davis Unified Ignition GM Street/Strip D.U.I. Distributors

Gain serious firepower with GM Street/Strip D.U.I. distributors from Performance Distributors. These fire sticks have everything you need for your ignition in one simple, but strong unit. They offer an easy, one-wire hookup--no external coils or spark boxes, just one 12 V hot wire hookup for 50,000 V of pure spark energy and a cleaner, crisper, more powerful-running engine. Their Dyna-Module, along with the high-voltage coil, allows spark plug gaps to be opened up, increased dwell for longer-duration spark, and the most complete combustion of your fuel mixture for increased horsepower and torque. Plus, the caps have brass terminals for optimum conductivity and are available in several colors, including clear, so you can see the firepower at work. Feel the power; experience Performance Distributors GM Street/Strip D.U.I. distributors.

4.59 out of 5 stars ( 144 )

$349.00

—

$459.00

Autolite Copper Core Spark Plugs

Autolite copper core spark plugs feature a cold-formed steel shell with precision-rolled threads, a full copper core electrode for better performance, and a one-piece terminal post to add strength. The ignition plugs use a copper-glass seal that bonds the insulator and terminal post center electrode together. This ensures full voltage at the spark gap and a 100 percent leak-proof, gas-tight seal. Autolite features an extensive application guide to cover just about everything with an internal combustion engine. Keep your engine running smoothly and reliably with Autolite replacement copper core spark plugs.

4.82 out of 5 stars ( 245 )

$1.99

—

$5.99

On Sale

MSD Blaster OEM Replacement Coils

When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.

4.72 out of 5 stars ( 629 )

$123.95

$70.62

—

$767.95

On Sale

MSD Flying Magnet Crank Trigger Kits

MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.

4.65 out of 5 stars ( 52 )

$537.95

—

$614.95

On Sale

Summit Racing™ High-Output Ignition Coils

Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.

4.5 out of 5 stars ( 375 )

$30.99

—

$439.92

$27.89

—

$395.92